linux/io_uring/fdinfo.c

239 lines
7.4 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/io_uring.h>
#include <uapi/linux/io_uring.h>
#include "io_uring.h"
#include "sqpoll.h"
#include "fdinfo.h"
#include "cancel.h"
#include "rsrc.h"
#ifdef CONFIG_PROC_FS
static __cold int io_uring_show_cred(struct seq_file *m, unsigned int id,
const struct cred *cred)
{
struct user_namespace *uns = seq_user_ns(m);
struct group_info *gi;
kernel_cap_t cap;
int g;
seq_printf(m, "%5d\n", id);
seq_put_decimal_ull(m, "\tUid:\t", from_kuid_munged(uns, cred->uid));
seq_put_decimal_ull(m, "\t\t", from_kuid_munged(uns, cred->euid));
seq_put_decimal_ull(m, "\t\t", from_kuid_munged(uns, cred->suid));
seq_put_decimal_ull(m, "\t\t", from_kuid_munged(uns, cred->fsuid));
seq_put_decimal_ull(m, "\n\tGid:\t", from_kgid_munged(uns, cred->gid));
seq_put_decimal_ull(m, "\t\t", from_kgid_munged(uns, cred->egid));
seq_put_decimal_ull(m, "\t\t", from_kgid_munged(uns, cred->sgid));
seq_put_decimal_ull(m, "\t\t", from_kgid_munged(uns, cred->fsgid));
seq_puts(m, "\n\tGroups:\t");
gi = cred->group_info;
for (g = 0; g < gi->ngroups; g++) {
seq_put_decimal_ull(m, g ? " " : "",
from_kgid_munged(uns, gi->gid[g]));
}
seq_puts(m, "\n\tCapEff:\t");
cap = cred->cap_effective;
capability: just use a 'u64' instead of a 'u32[2]' array Back in 2008 we extended the capability bits from 32 to 64, and we did it by extending the single 32-bit capability word from one word to an array of two words. It was then obfuscated by hiding the "2" behind two macro expansions, with the reasoning being that maybe it gets extended further some day. That reasoning may have been valid at the time, but the last thing we want to do is to extend the capability set any more. And the array of values not only causes source code oddities (with loops to deal with it), but also results in worse code generation. It's a lose-lose situation. So just change the 'u32[2]' into a 'u64' and be done with it. We still have to deal with the fact that the user space interface is designed around an array of these 32-bit values, but that was the case before too, since the array layouts were different (ie user space doesn't use an array of 32-bit values for individual capability masks, but an array of 32-bit slices of multiple masks). So that marshalling of data is actually simplified too, even if it does remain somewhat obscure and odd. This was all triggered by my reaction to the new "cap_isidentical()" introduced recently. By just using a saner data structure, it went from unsigned __capi; CAP_FOR_EACH_U32(__capi) { if (a.cap[__capi] != b.cap[__capi]) return false; } return true; to just being return a.val == b.val; instead. Which is rather more obvious both to humans and to compilers. Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-01 03:39:09 +08:00
seq_put_hex_ll(m, NULL, cap.val, 16);
seq_putc(m, '\n');
return 0;
}
/*
* Caller holds a reference to the file already, we don't need to do
* anything else to get an extra reference.
*/
__cold void io_uring_show_fdinfo(struct seq_file *m, struct file *file)
{
struct io_ring_ctx *ctx = file->private_data;
struct io_overflow_cqe *ocqe;
struct io_rings *r = ctx->rings;
io_uring/sqpoll: statistics of the true utilization of sq threads Count the running time and actual IO processing time of the sqpoll thread, and output the statistical data to fdinfo. Variable description: "work_time" in the code represents the sum of the jiffies of the sq thread actually processing IO, that is, how many milliseconds it actually takes to process IO. "total_time" represents the total time that the sq thread has elapsed from the beginning of the loop to the current time point, that is, how many milliseconds it has spent in total. The test tool is fio, and its parameters are as follows: [global] ioengine=io_uring direct=1 group_reporting bs=128k norandommap=1 randrepeat=0 refill_buffers ramp_time=30s time_based runtime=1m clocksource=clock_gettime overwrite=1 log_avg_msec=1000 numjobs=1 [disk0] filename=/dev/nvme0n1 rw=read iodepth=16 hipri sqthread_poll=1 The test results are as follows: Every 2.0s: cat /proc/9230/fdinfo/6 | grep -E Sq SqMask: 0x3 SqHead: 3197153 SqTail: 3197153 CachedSqHead: 3197153 SqThread: 9231 SqThreadCpu: 11 SqTotalTime: 18099614 SqWorkTime: 16748316 The test results corresponding to different iodepths are as follows: |-----------|-------|-------|-------|------|-------| | iodepth | 1 | 4 | 8 | 16 | 64 | |-----------|-------|-------|-------|------|-------| |utilization| 2.9% | 8.8% | 10.9% | 92.9%| 84.4% | |-----------|-------|-------|-------|------|-------| | idle | 97.1% | 91.2% | 89.1% | 7.1% | 15.6% | |-----------|-------|-------|-------|------|-------| Signed-off-by: Xiaobing Li <xiaobing.li@samsung.com> Link: https://lore.kernel.org/r/20240228091251.543383-1-xiaobing.li@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-28 17:12:51 +08:00
struct rusage sq_usage;
unsigned int sq_mask = ctx->sq_entries - 1, cq_mask = ctx->cq_entries - 1;
unsigned int sq_head = READ_ONCE(r->sq.head);
unsigned int sq_tail = READ_ONCE(r->sq.tail);
unsigned int cq_head = READ_ONCE(r->cq.head);
unsigned int cq_tail = READ_ONCE(r->cq.tail);
unsigned int cq_shift = 0;
unsigned int sq_shift = 0;
unsigned int sq_entries, cq_entries;
int sq_pid = -1, sq_cpu = -1;
io_uring/sqpoll: statistics of the true utilization of sq threads Count the running time and actual IO processing time of the sqpoll thread, and output the statistical data to fdinfo. Variable description: "work_time" in the code represents the sum of the jiffies of the sq thread actually processing IO, that is, how many milliseconds it actually takes to process IO. "total_time" represents the total time that the sq thread has elapsed from the beginning of the loop to the current time point, that is, how many milliseconds it has spent in total. The test tool is fio, and its parameters are as follows: [global] ioengine=io_uring direct=1 group_reporting bs=128k norandommap=1 randrepeat=0 refill_buffers ramp_time=30s time_based runtime=1m clocksource=clock_gettime overwrite=1 log_avg_msec=1000 numjobs=1 [disk0] filename=/dev/nvme0n1 rw=read iodepth=16 hipri sqthread_poll=1 The test results are as follows: Every 2.0s: cat /proc/9230/fdinfo/6 | grep -E Sq SqMask: 0x3 SqHead: 3197153 SqTail: 3197153 CachedSqHead: 3197153 SqThread: 9231 SqThreadCpu: 11 SqTotalTime: 18099614 SqWorkTime: 16748316 The test results corresponding to different iodepths are as follows: |-----------|-------|-------|-------|------|-------| | iodepth | 1 | 4 | 8 | 16 | 64 | |-----------|-------|-------|-------|------|-------| |utilization| 2.9% | 8.8% | 10.9% | 92.9%| 84.4% | |-----------|-------|-------|-------|------|-------| | idle | 97.1% | 91.2% | 89.1% | 7.1% | 15.6% | |-----------|-------|-------|-------|------|-------| Signed-off-by: Xiaobing Li <xiaobing.li@samsung.com> Link: https://lore.kernel.org/r/20240228091251.543383-1-xiaobing.li@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-28 17:12:51 +08:00
u64 sq_total_time = 0, sq_work_time = 0;
bool has_lock;
unsigned int i;
if (ctx->flags & IORING_SETUP_CQE32)
cq_shift = 1;
if (ctx->flags & IORING_SETUP_SQE128)
sq_shift = 1;
/*
* we may get imprecise sqe and cqe info if uring is actively running
* since we get cached_sq_head and cached_cq_tail without uring_lock
* and sq_tail and cq_head are changed by userspace. But it's ok since
* we usually use these info when it is stuck.
*/
seq_printf(m, "SqMask:\t0x%x\n", sq_mask);
seq_printf(m, "SqHead:\t%u\n", sq_head);
seq_printf(m, "SqTail:\t%u\n", sq_tail);
seq_printf(m, "CachedSqHead:\t%u\n", ctx->cached_sq_head);
seq_printf(m, "CqMask:\t0x%x\n", cq_mask);
seq_printf(m, "CqHead:\t%u\n", cq_head);
seq_printf(m, "CqTail:\t%u\n", cq_tail);
seq_printf(m, "CachedCqTail:\t%u\n", ctx->cached_cq_tail);
seq_printf(m, "SQEs:\t%u\n", sq_tail - sq_head);
sq_entries = min(sq_tail - sq_head, ctx->sq_entries);
for (i = 0; i < sq_entries; i++) {
unsigned int entry = i + sq_head;
struct io_uring_sqe *sqe;
unsigned int sq_idx;
if (ctx->flags & IORING_SETUP_NO_SQARRAY)
break;
sq_idx = READ_ONCE(ctx->sq_array[entry & sq_mask]);
if (sq_idx > sq_mask)
continue;
sqe = &ctx->sq_sqes[sq_idx << sq_shift];
seq_printf(m, "%5u: opcode:%s, fd:%d, flags:%x, off:%llu, "
"addr:0x%llx, rw_flags:0x%x, buf_index:%d "
"user_data:%llu",
sq_idx, io_uring_get_opcode(sqe->opcode), sqe->fd,
sqe->flags, (unsigned long long) sqe->off,
(unsigned long long) sqe->addr, sqe->rw_flags,
sqe->buf_index, sqe->user_data);
if (sq_shift) {
u64 *sqeb = (void *) (sqe + 1);
int size = sizeof(struct io_uring_sqe) / sizeof(u64);
int j;
for (j = 0; j < size; j++) {
seq_printf(m, ", e%d:0x%llx", j,
(unsigned long long) *sqeb);
sqeb++;
}
}
seq_printf(m, "\n");
}
seq_printf(m, "CQEs:\t%u\n", cq_tail - cq_head);
cq_entries = min(cq_tail - cq_head, ctx->cq_entries);
for (i = 0; i < cq_entries; i++) {
unsigned int entry = i + cq_head;
struct io_uring_cqe *cqe = &r->cqes[(entry & cq_mask) << cq_shift];
seq_printf(m, "%5u: user_data:%llu, res:%d, flag:%x",
entry & cq_mask, cqe->user_data, cqe->res,
cqe->flags);
if (cq_shift)
seq_printf(m, ", extra1:%llu, extra2:%llu\n",
cqe->big_cqe[0], cqe->big_cqe[1]);
seq_printf(m, "\n");
}
/*
* Avoid ABBA deadlock between the seq lock and the io_uring mutex,
* since fdinfo case grabs it in the opposite direction of normal use
* cases. If we fail to get the lock, we just don't iterate any
* structures that could be going away outside the io_uring mutex.
*/
has_lock = mutex_trylock(&ctx->uring_lock);
if (has_lock && (ctx->flags & IORING_SETUP_SQPOLL)) {
struct io_sq_data *sq = ctx->sq_data;
io_uring: Fix sqpoll utilization check racing with dying sqpoll Commit 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads"), currently in Jens for-next branch, peeks at io_sq_data->thread to report utilization statistics. But, If io_uring_show_fdinfo races with sqpoll terminating, even though we hold the ctx lock, sqd->thread might be NULL and we hit the Oops below. Note that we could technically just protect the getrusage() call and the sq total/work time calculations. But showing some sq information (pid/cpu) and not other information (utilization) is more confusing than not reporting anything, IMO. So let's hide it all if we happen to race with a dying sqpoll. This can be triggered consistently in my vm setup running sqpoll-cancel-hang.t in a loop. BUG: kernel NULL pointer dereference, address: 00000000000007b0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 16587 Comm: systemd-coredum Not tainted 6.8.0-rc3-g3fcb9d17206e-dirty #69 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 RIP: 0010:getrusage+0x21/0x3e0 Code: 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 d1 48 89 e5 41 57 41 56 41 55 41 54 49 89 fe 41 52 53 48 89 d3 48 83 ec 30 <4c> 8b a7 b0 07 00 00 48 8d 7a 08 65 48 8b 04 25 28 00 00 00 48 89 RSP: 0018:ffffa166c671bb80 EFLAGS: 00010282 RAX: 00000000000040ca RBX: ffffa166c671bc60 RCX: ffffa166c671bc60 RDX: ffffa166c671bc60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffa166c671bbe0 R08: ffff9448cc3930c0 R09: 0000000000000000 R10: ffffa166c671bd50 R11: ffffffff9ee89260 R12: 0000000000000000 R13: ffff9448ce099480 R14: 0000000000000000 R15: ffff9448cff5b000 FS: 00007f786e225900(0000) GS:ffff94493bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007b0 CR3: 000000010d39c000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x154/0x440 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x174/0x7c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x63/0x140 ? asm_exc_page_fault+0x22/0x30 ? getrusage+0x21/0x3e0 ? seq_printf+0x4e/0x70 io_uring_show_fdinfo+0x9db/0xa10 ? srso_alias_return_thunk+0x5/0xfbef5 ? vsnprintf+0x101/0x4d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? seq_vprintf+0x34/0x50 ? srso_alias_return_thunk+0x5/0xfbef5 ? seq_printf+0x4e/0x70 ? seq_show+0x16b/0x1d0 ? __pfx_io_uring_show_fdinfo+0x10/0x10 seq_show+0x16b/0x1d0 seq_read_iter+0xd7/0x440 seq_read+0x102/0x140 vfs_read+0xae/0x320 ? srso_alias_return_thunk+0x5/0xfbef5 ? __do_sys_newfstat+0x35/0x60 ksys_read+0xa5/0xe0 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f786ec1db4d Code: e8 46 e3 01 00 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 80 3d d9 ce 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec RSP: 002b:00007ffcb361a4b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055a4c8fe42f0 RCX: 00007f786ec1db4d RDX: 0000000000000400 RSI: 000055a4c8fe48a0 RDI: 0000000000000006 RBP: 00007f786ecfb0b0 R08: 00007f786ecfb2a8 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f786ecfaf60 R13: 000055a4c8fe42f0 R14: 0000000000000000 R15: 00007ffcb361a628 </TASK> Modules linked in: CR2: 00000000000007b0 ---[ end trace 0000000000000000 ]--- RIP: 0010:getrusage+0x21/0x3e0 Code: 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 d1 48 89 e5 41 57 41 56 41 55 41 54 49 89 fe 41 52 53 48 89 d3 48 83 ec 30 <4c> 8b a7 b0 07 00 00 48 8d 7a 08 65 48 8b 04 25 28 00 00 00 48 89 RSP: 0018:ffffa166c671bb80 EFLAGS: 00010282 RAX: 00000000000040ca RBX: ffffa166c671bc60 RCX: ffffa166c671bc60 RDX: ffffa166c671bc60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffa166c671bbe0 R08: ffff9448cc3930c0 R09: 0000000000000000 R10: ffffa166c671bd50 R11: ffffffff9ee89260 R12: 0000000000000000 R13: ffff9448ce099480 R14: 0000000000000000 R15: ffff9448cff5b000 FS: 00007f786e225900(0000) GS:ffff94493bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007b0 CR3: 000000010d39c000 CR4: 0000000000750ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ce00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20240309003256.358-1-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-09 08:32:56 +08:00
/*
* sq->thread might be NULL if we raced with the sqpoll
* thread termination.
*/
if (sq->thread) {
sq_pid = sq->task_pid;
sq_cpu = sq->sq_cpu;
getrusage(sq->thread, RUSAGE_SELF, &sq_usage);
sq_total_time = (sq_usage.ru_stime.tv_sec * 1000000
+ sq_usage.ru_stime.tv_usec);
sq_work_time = sq->work_time;
}
}
seq_printf(m, "SqThread:\t%d\n", sq_pid);
seq_printf(m, "SqThreadCpu:\t%d\n", sq_cpu);
io_uring/sqpoll: statistics of the true utilization of sq threads Count the running time and actual IO processing time of the sqpoll thread, and output the statistical data to fdinfo. Variable description: "work_time" in the code represents the sum of the jiffies of the sq thread actually processing IO, that is, how many milliseconds it actually takes to process IO. "total_time" represents the total time that the sq thread has elapsed from the beginning of the loop to the current time point, that is, how many milliseconds it has spent in total. The test tool is fio, and its parameters are as follows: [global] ioengine=io_uring direct=1 group_reporting bs=128k norandommap=1 randrepeat=0 refill_buffers ramp_time=30s time_based runtime=1m clocksource=clock_gettime overwrite=1 log_avg_msec=1000 numjobs=1 [disk0] filename=/dev/nvme0n1 rw=read iodepth=16 hipri sqthread_poll=1 The test results are as follows: Every 2.0s: cat /proc/9230/fdinfo/6 | grep -E Sq SqMask: 0x3 SqHead: 3197153 SqTail: 3197153 CachedSqHead: 3197153 SqThread: 9231 SqThreadCpu: 11 SqTotalTime: 18099614 SqWorkTime: 16748316 The test results corresponding to different iodepths are as follows: |-----------|-------|-------|-------|------|-------| | iodepth | 1 | 4 | 8 | 16 | 64 | |-----------|-------|-------|-------|------|-------| |utilization| 2.9% | 8.8% | 10.9% | 92.9%| 84.4% | |-----------|-------|-------|-------|------|-------| | idle | 97.1% | 91.2% | 89.1% | 7.1% | 15.6% | |-----------|-------|-------|-------|------|-------| Signed-off-by: Xiaobing Li <xiaobing.li@samsung.com> Link: https://lore.kernel.org/r/20240228091251.543383-1-xiaobing.li@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-28 17:12:51 +08:00
seq_printf(m, "SqTotalTime:\t%llu\n", sq_total_time);
seq_printf(m, "SqWorkTime:\t%llu\n", sq_work_time);
seq_printf(m, "UserFiles:\t%u\n", ctx->nr_user_files);
for (i = 0; has_lock && i < ctx->nr_user_files; i++) {
struct file *f = io_file_from_index(&ctx->file_table, i);
if (f)
seq_printf(m, "%5u: %s\n", i, file_dentry(f)->d_iname);
else
seq_printf(m, "%5u: <none>\n", i);
}
seq_printf(m, "UserBufs:\t%u\n", ctx->nr_user_bufs);
for (i = 0; has_lock && i < ctx->nr_user_bufs; i++) {
struct io_mapped_ubuf *buf = ctx->user_bufs[i];
seq_printf(m, "%5u: 0x%llx/%u\n", i, buf->ubuf, buf->len);
}
if (has_lock && !xa_empty(&ctx->personalities)) {
unsigned long index;
const struct cred *cred;
seq_printf(m, "Personalities:\n");
xa_for_each(&ctx->personalities, index, cred)
io_uring_show_cred(m, index, cred);
}
seq_puts(m, "PollList:\n");
for (i = 0; i < (1U << ctx->cancel_table.hash_bits); i++) {
struct io_hash_bucket *hb = &ctx->cancel_table.hbs[i];
struct io_hash_bucket *hbl = &ctx->cancel_table_locked.hbs[i];
struct io_kiocb *req;
spin_lock(&hb->lock);
hlist_for_each_entry(req, &hb->list, hash_node)
seq_printf(m, " op=%d, task_works=%d\n", req->opcode,
task_work_pending(req->task));
spin_unlock(&hb->lock);
if (!has_lock)
continue;
hlist_for_each_entry(req, &hbl->list, hash_node)
seq_printf(m, " op=%d, task_works=%d\n", req->opcode,
task_work_pending(req->task));
}
if (has_lock)
mutex_unlock(&ctx->uring_lock);
seq_puts(m, "CqOverflowList:\n");
spin_lock(&ctx->completion_lock);
list_for_each_entry(ocqe, &ctx->cq_overflow_list, list) {
struct io_uring_cqe *cqe = &ocqe->cqe;
seq_printf(m, " user_data=%llu, res=%d, flags=%x\n",
cqe->user_data, cqe->res, cqe->flags);
}
spin_unlock(&ctx->completion_lock);
io_uring: add napi busy settings to the fdinfo output This info may be useful when attempting to debug a problem involving a ring using the NAPI feature. Here is an example of the output: ip-172-31-39-89 /proc/772/fdinfo # cat 14 pos: 0 flags: 02000002 mnt_id: 16 ino: 10243 SqMask: 0xff SqHead: 633 SqTail: 633 CachedSqHead: 633 CqMask: 0x3fff CqHead: 430250 CqTail: 430250 CachedCqTail: 430250 SQEs: 0 CQEs: 0 SqThread: 885 SqThreadCpu: 0 SqTotalTime: 52793826 SqWorkTime: 3590465 UserFiles: 0 UserBufs: 0 PollList: op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=6, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=6, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 op=10, task_works=0 CqOverflowList: NAPI: enabled napi_busy_poll_to: 1 napi_prefer_busy_poll: true Signed-off-by: Olivier Langlois <olivier@trillion01.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bb184f8b62703ddd3e6e19eae7ab6c67b97e1e10.1722293317.git.olivier@trillion01.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-07-30 06:38:33 +08:00
#ifdef CONFIG_NET_RX_BUSY_POLL
if (ctx->napi_enabled) {
seq_puts(m, "NAPI:\tenabled\n");
seq_printf(m, "napi_busy_poll_dt:\t%llu\n", ctx->napi_busy_poll_dt);
if (ctx->napi_prefer_busy_poll)
seq_puts(m, "napi_prefer_busy_poll:\ttrue\n");
else
seq_puts(m, "napi_prefer_busy_poll:\tfalse\n");
} else {
seq_puts(m, "NAPI:\tdisabled\n");
}
#endif
}
#endif