glibc defines this function only as gnu extention
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add commands and helper APIs to run selftests.
Include a selftest id for a non volatile memory i.e. flash.
Also, update the man page and bash-completion for selftests
commands.
Examples:
$ devlink dev selftests run pci/0000:03:00.0 id flash
pci/0000:03:00.0:
flash:
status passed
$ devlink dev selftests show pci/0000:03:00.0
pci/0000:03:00.0
flash
$ devlink dev selftests show pci/0000:03:00.0 -j
{"selftests":{"pci/0000:03:00.0":["flash"]}}
$ devlink dev selftests run pci/0000:03:00.0 id flash -j
{"selftests":{"pci/0000:03:00.0":{"flash":{"status":"passed"}}}}
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds the support for the reduced version of the H.Encaps and
H.L2Encaps behaviors as defined in RFC 8986 [1].
H.Encaps.Red and H.L2Encaps.Red SRv6 behaviors are an optimization of the
H.Encaps and H.L2Encaps aiming to reduce the length of the SID List carried
in the pushed SRH. Specifically, the reduced version of the behaviors
removes the first SID contained in the SID List (i.e. SRv6 Policy) by
storing it into the IPv6 Destination Address. When SRv6 Policy is made of
only one SID, the reduced version of the behaviors omits the SRH at all and
pushes that SID directly into the IPv6 DA.
Some examples:
ip -6 route add 2001:db8::1 encap seg6 mode encap.red segs fcf0:1::e,fcf0:2::d6 dev eth0
ip -6 route add 2001:db8::2 encap seg6 mode l2encap.red segs fcf0:1::d2 dev eth0
Standard Output:
ip -6 route show 2001:db8::1
2001:db8::1 encap seg6 mode encap.red segs 2 [ fcf0:1::e fcf0:2::d6 ] dev eth0 metric 1024 pref medium
JSON Output:
ip -6 -j -p route show 2001:db8::1
[ {
"dst": "2001:db8::1",
"encap": "seg6",
"mode": "encap.red",
"segs": [ "fcf0:1::e","fcf0:2::d6" ],
"dev": "eth0",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
[1] - https://datatracker.ietf.org/doc/html/rfc8986
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Signed-off-by: David Ahern <dsahern@kernel.org>
Update kernel headers to commit
63757225a933 ("Merge tag 'mlx5-updates-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux")
Signed-off-by: David Ahern <dsahern@kernel.org>
Wojciech Drewek says:
====================
This patchset implements support for matching
on PPPoE specific fields using tc-flower.
First patch introduces small refactor which allows
to use same mechanism of finding protocol for
both ppp and ether protocols. Second patch
adds support for parsing ppp protocols.
Last patch is about parsing PPPoE fields.
Kernel changes (merged):
https://lore.kernel.org/netdev/20220726203133.2171332-1-anthony.l.nguyen@intel.com/T/#t
====================
Signed-off-by: David Ahern <dsahern@kernel.org>
Introduce PPPoE specific fields in tc-flower:
- session id (16 bits)
- ppp protocol (16 bits)
Those fields can be provided only when protocol was set to
ETH_P_PPP_SES. ppp_proto works similar to vlan_ethtype, i.e.
ppp_proto overwrites eth_type. Thanks to that, fields from
encapsulated protocols (such as src_ip) can be specified.
e.g.
# tc filter add dev ens6f0 ingress prio 1 protocol ppp_ses \
flower \
pppoe_sid 1234 \
ppp_proto ip \
dst_ip 127.0.0.1 \
src_ip 127.0.0.2 \
action drop
Vlan and cvlan is also supported, in this case cvlan_ethtype
or vlan_ethtype has to be set to ETH_P_PPP_SES.
e.g.
# tc filter add dev ens6f0 ingress prio 1 protocol 802.1Q \
flower \
vlan_id 2 \
vlan_ethtype ppp_ses \
pppoe_sid 1234 \
ppp_proto ip \
dst_ip 127.0.0.1 \
src_ip 127.0.0.2 \
action drop
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
PPP protocol field uses different values than ethertype. Introduce
utilities for translating PPP protocols from strings to values
and vice versa. Use generic API from utils in order to get
proto id and name.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Move core logic of ll_proto_n2a and ll_proto_a2n
to utils.c and make it more generic by allowing to
pass table of protocols as argument (proto_tb).
Introduce struct proto with protocol ID and name to
allow this. This wil allow to use those functions by
other use cases.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
If __NR_bpf is not enabled, bpf() function set errno and return -1. Thus,
this patch includes the header.
Fixes: ac4e0913be ("bpf: Export bpf syscall wrapper")
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce a new object "lc" to add devlink support for line cards with
two commands:
show - to get the info about the line card state, list of supported
types as reported by kernel/driver.
set - to set/clear the line card type.
Example:
$ devlink lc
pci/0000:01:00.0:
lc 1 state unprovisioned
supported_types:
16x100G
lc 2 state unprovisioned
supported_types:
16x100G
lc 3 state unprovisioned
supported_types:
16x100G
lc 4 state unprovisioned
supported_types:
16x100G
lc 5 state unprovisioned
supported_types:
16x100G
lc 6 state unprovisioned
supported_types:
16x100G
lc 7 state unprovisioned
supported_types:
16x100G
lc 8 state unprovisioned
supported_types:
16x100G
To provision the slot #8:
$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
To uprovision the slot #8:
$ devlink lc set pci/0000:01:00.0 lc 8 notype
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Update the man page to include vdpa statistics information inroduce in
6f97e9c933 ("vdpa: Add support for reading vdpa device statistics")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
With the following command sequence:
ip link add dummy0 type dummy
ip neigh add 192.168.0.1 dev dummy0
ip neigh get 192.168.0.1 dev dummy0
when running the last command under valgrind, it reports
32,768 bytes in 1 blocks are definitely lost in loss record 2 of 2
at 0x483F7B5: malloc (vg_replace_malloc.c:381)
by 0x17A0EC: rtnl_recvmsg (libnetlink.c:838)
by 0x17A3D1: __rtnl_talk_iov.constprop.0 (libnetlink.c:1040)
by 0x17B894: __rtnl_talk (libnetlink.c:1141)
by 0x17B894: rtnl_talk (libnetlink.c:1147)
by 0x12E49B: ipneigh_get (ipneigh.c:728)
by 0x1174CB: do_cmd (ip.c:136)
by 0x116F7C: main (ip.c:324)
Free the answer obtained from rtnl_talk().
Fixes: 6284236237 ("ipneigh: neigh get support")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When running the command `ip mptcp limits` under valgrind, it reports
32,768 bytes in 1 blocks are definitely lost in loss record 1 of 1
at 0x483F7B5: malloc (vg_replace_malloc.c:381)
by 0x17A0BC: rtnl_recvmsg (libnetlink.c:838)
by 0x17A3A1: __rtnl_talk_iov.constprop.0 (libnetlink.c:1040)
by 0x17B864: __rtnl_talk (libnetlink.c:1141)
by 0x17B864: rtnl_talk (libnetlink.c:1147)
by 0x16837D: mptcp_limit_get_set (ipmptcp.c:436)
by 0x1174CB: do_cmd (ip.c:136)
by 0x116F7C: main (ip.c:324)
Free the answer obtained from rtnl_talk().
Fixes: 7e0767cd86 ("add support for mptcp netlink interface")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With the following command sequence:
ip mptcp endpoint add 127.0.0.1 id 1
ip mptcp endpoint show id 1
when running the last command under valgrind, it reports
32,768 bytes in 1 blocks are definitely lost in loss record 2 of 2
at 0x483F7B5: malloc (vg_replace_malloc.c:381)
by 0x17A0AC: rtnl_recvmsg (libnetlink.c:838)
by 0x17A391: __rtnl_talk_iov.constprop.0 (libnetlink.c:1040)
by 0x17B854: __rtnl_talk (libnetlink.c:1141)
by 0x17B854: rtnl_talk (libnetlink.c:1147)
by 0x168A56: mptcp_addr_show (ipmptcp.c:334)
by 0x1174CB: do_cmd (ip.c:136)
by 0x116F7C: main (ip.c:324)
Free the answer obtained from rtnl_talk().
Fixes: 7e0767cd86 ("add support for mptcp netlink interface")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With the following command sequence:
ip link add br0 up type bridge
ip link add dummy0 up address 02:00:00:00:00:01 master br0 type dummy
bridge fdb get 02:00:00:00:00:01 br br0
when running the last command under valgrind, it reports
32,768 bytes in 1 blocks are definitely lost in loss record 2 of 2
at 0x483F7B5: malloc (vg_replace_malloc.c:381)
by 0x11C1EC: rtnl_recvmsg (libnetlink.c:838)
by 0x11C4D1: __rtnl_talk_iov.constprop.0 (libnetlink.c:1040)
by 0x11D994: __rtnl_talk (libnetlink.c:1141)
by 0x11D994: rtnl_talk (libnetlink.c:1147)
by 0x10D336: fdb_get (fdb.c:652)
by 0x48907FC: (below main) (libc-start.c:332)
Free the answer obtained from rtnl_talk().
Fixes: 4ed5ad7bd3 ("bridge: fdb get support")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Running a command like `ip addr show dev lo` under valgrind informs us that
32,768 bytes in 1 blocks are definitely lost in loss record 4 of 4
at 0x483577F: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x16CBE2: rtnl_recvmsg (libnetlink.c:775)
by 0x16CF04: __rtnl_talk_iov (libnetlink.c:954)
by 0x16E257: __rtnl_talk (libnetlink.c:1059)
by 0x16E257: rtnl_talk (libnetlink.c:1065)
by 0x115CB1: ipaddr_link_get (ipaddress.c:1833)
by 0x11A0D1: ipaddr_list_flush_or_save (ipaddress.c:2030)
by 0x1152EB: do_cmd (ip.c:115)
by 0x114D6F: main (ip.c:321)
After calling store_nlmsg(), the original buffer should be freed. That is
the pattern used elsewhere through the rtnl_dump_filter() call chain.
Fixes: 8847097850 ("ip address: Set device index in dump request")
Reported-by: Binu Gopalakrishnapillai <binug@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When vdpa was updated, it included linux/virtio_ring.h but that
sanitized header file was not added.
Fixes: bd91c76471 ("vdpa: Allow for printing negotiated features of a device")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Iproute2 depends on kernel headers and all necessary kernel headers
should be in iproute tree.
Fixes: c2ecc82b9d ("vdpa: Add vdpa tool")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In bpf program, only the program name is unique. Before this patch, if there
are multiple programs with the same section name, only the first program
will be attached. With program name support, users could specify the exact
program they want to attach.
Note this feature is only supported when iproute2 build with libbpf.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The commit cited below added a new column to print_stats64(). However it
then updated only one size_columns() call site, neglecting to update the
remaining three. As a result, in those not-updated invocations,
size_columns() now accesses a vararg argument that is not being passed,
which is undefined behavior.
Fixes: cebf67a35d ("show rx_otherehost_dropped stat in ip link show")
CC: Tariq Toukan <tariqt@nvidia.com>
CC: Itay Aveksis <itayav@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
In print_stats64(), the last size_columns() invocation passes number of
carrier changes as one of the arguments. The value is decoded as a 32-bit
quantity, but size_columns() expects a 64-bit one. This is undefined
behavior.
The reason valgrind does not cite this is that the previous size_columns()
invocations prime the ABI area used for the value transfer. When these
other invocations are commented away, valgrind does complain that
"conditional jump or move depends on uninitialised value", as would be
expected.
Fixes: 49437375b6 ("ip: dynamically size columns when printing stats")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For values near the 64-bit boundary, the iterative application of
powi *= 10 causes powi to overflow without the termination condition of
powi >= val having ever been satisfied. Instead, when determining the
length of the number, iterate val /= 10 and terminate when it's a single
digit.
Fixes: 49437375b6 ("ip: dynamically size columns when printing stats")
CC: Tariq Toukan <tariqt@nvidia.com>
CC: Itay Aveksis <itayav@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add per port priority support for active slave re-selection during
bonding failover. A higher number means higher priority.
This option is only valid for active-backup(1), balance-tlb (5) and
balance-alb (6) mode.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
tc-ct manpage provides a wrong command to add an ingress qdisc to an
interface:
$ tc qdisc add dev eth0 handle ingress
Error: argument "ingress" is wrong: invalid qdisc ID
Fix it removing the useless "handle" keyword.
Fixes: 924c43778a ("man: tc-ct.8: Add manual page for ct tc action")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In print_tunnel json output, a typo makes it impossible to know the
value of udp6_csum_rx, printing instead udp6_csum_tx two times.
Fixed getting rid of the typo.
Fixes: 98453b6580 ("ip/l2tp: add JSON support")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In tc-fq_codel man page, "length .B interval" should be "length interval."
Signed-off-by: Yuki Inoguchi <inoguchi.yuki@fujitsu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Read statistics of a vdpa device. The specific data is a received as a
pair of attribute name and attribute value.
Examples:
1. Read statistics for the virtqueue at index 1
$ vdpa dev vstats show vdpa-a qidx 1
vdpa-a:
vdpa-a: queue_type tx received_desc 321812 completed_desc 321812
2. Read statistics for the virtqueue at index 16
$ vdpa dev vstats show vdpa-a qidx 16
vdpa-a: queue_type control_vq received_desc 17 completed_desc 17
3. Read statisitics for the virtqueue at index 0 with json output
$ vdpa -j dev vstats show vdpa-a qidx 0
{"vstats":{"vdpa-a":{"queue_type":"rx","received_desc":114855,"completed_desc":114617}}}
4. Read statistics for the virtqueue at index 0 with preety json
output
$ vdpa -jp dev vstats show vdpa-a qidx 0
vdpa -jp dev vstats show vdpa-a qidx 0
{
"vstats": {
"vdpa-a": {
"queue_type": "rx",
"received_desc": 114855,
"completed_desc": 114617
}
}
}
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
In several places (code reuse?), the variable handle
is a parameter to the function, but then
is defined inside basic block for classid.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
