This adds configuration for the IFLA_BRPORT_MCAST_TO_UCAST flag that
allows multicast packets to be replicated as unicast packets.
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We already print src_vni for a fdb entry when present.
This patch adds the ability to set src_vni on a fdb
entry. When not specified, kernel will use vni specified
on the vxlan device. This can be used on a vxlan fdb entry
when the vxlan device is in external or collect metadata
mode.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While iproute2 correctly uses ifinfomsg struct as the ancillary header
when requesting an FDB dump on old kernels, it sets the message type to
RTM_GETLINK. This results in wrong reply being returned.
Fix this by using RTM_GETNEIGH instead.
Before:
$ bridge fdb show brport dummy0
Not RTM_NEWNEIGH: 00000158 00000010 00000002
After:
$ bridge fdb show brport dummy0
2a:0b:41:1c:92:d3 vlan 1 master br0 permanent
2a:0b:41:1c:92:d3 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 05880354c2 ("bridge: fdb: Fix filtering with strict checking disabled")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: LiLiang <liali@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Older kernels expect an ifinfomsg struct as the ancillary header, and
after kernel commit bd961c9bc664 ("rtnetlink: fix rtnl_fdb_dump() for ndmsg
header") can handle either ifinfomsg or ndmsg. Strict data checking only
allows ndmsg.
Use the new RTNL_HANDLE_F_STRICT_CHK flag to know which header to send.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Add fdb_dump_filter to set filter attributes in dump request
and convert fdb_show to use rtnl_neighdump_req.
Signed-off-by: David Ahern <dsahern@gmail.com>
Since commit aea41afcfd ("ip bridge: Set NETLINK_GET_STRICT_CHK on
socket") iproute2 uses strict checking on kernels that support it. This
causes FDB dumping to fail [1], as iproute2 uses 'struct ifinfomsg'
whereas the kernel expects 'struct ndmsg'.
Note that with this change iproute2 continues to work on old kernels
that do not support strict checking, but contain the fix introduced in
kernel commit bd961c9bc664 ("rtnetlink: fix rtnl_fdb_dump() for ndmsg
header").
[1]
# bridge fdb show
[ 5365.137224] netlink: 4 bytes leftover after parsing attributes in process `bridge'.
Error: bytes leftover after parsing attributes.
Dump terminated
Fixes: aea41afcfd ("ip bridge: Set NETLINK_GET_STRICT_CHK on socket")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
iproute2 has been updated for the new strict policy in the kernel. Add a
helper to call setsockopt to enable the feature. Add a call to ip.c and
bridge.c
The setsockopt fails on older kernels and the error can be safely ignored
- any new fields or attributes are ignored by the older kernel.
Signed-off-by: David Ahern <dsahern@gmail.com>
The argument to print_0xhex is converted to unsigned long long
so the format string give for normal printout has to be some
variant of %llx. Otherwise, bogus values will be printed on
32 bit platforms.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
commit c7c1a1ef51 ("bridge: colorize output and use JSON print library")
broke previous use of -c to represent compressvlans. This restores
previous use of -c to represent compressvlans. Understand the original
motivation to use -c to represent color consistently everywhere but
there are apps and network interface managers out there that are already
using -c to prepresent compressed vlans.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After commit 4abb8c723a ("bridge: fdb: Fix for missing
keywords in non-JSON output"), I am seeing a double print for dev
in bridge fdb show. eg:
"44:38:39:00:6a:82 dev dev bridge vlan 1 master bridge permanent"
this patch removes the redundant print.
Fixes: 4abb8c723a ("bridge: fdb: Fix for missing keywords in non-JSON output")
CC: Phil Sutter <phil@nwl.cc>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The output of -statistics vlan show was broken previous change for json
output. This aligns the format to vlan show.
v2: fixed too greedy deletion that caused a -Wmaybe-uninitialized
Signed-off-by: Tobias Jungel <tobias.jungel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
While migrating to JSON print library, some keywords were dropped from
standard output by accident. Add them back to unbreak output parsers.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the new backup port option that can be set
on a bridge port. If the port's carrier goes down all of the traffic
gets redirected to the configured backup port. We add the following new
arguments:
$ ip link set dev brport type bridge_slave backup_port brport2
$ ip link set dev brport type bridge_slave nobackup_port
$ bridge link set dev brport backup_port brport2
$ bridge link set dev brport nobackup_port
The man pages are updated respectively.
Also 2 minor style adjustments:
- add missing space to bridge man page's state argument
- use lower starting case for vlan_tunnel in ip-link man page (to be
consistent with the rest)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_wilddump_stats_req_filter only takes RTM_GETSTATS as the type argument
so rename to rtnl_statsdump_req_filter for consistency with other request
functions and hardcode the type argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Rename rtnl_wilddump_req_filter to rtnl_linkdump_req_filter,
rtnl_wilddump_request to rtnl_linkdump_req and
rtnl_wilddump_req_filter_fn to rtnl_linkdump_req_filter_fn.
In all cases drop the type argument which at this point is only
RTM_GETLINK and hardcode in the functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new sticky flag that can be set on fdbs and update the
man page.
CC: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The bridge mdb show is broken on current iproute2. e.g.
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp 34: br0 veth0_br 224.1.1.1 temp
After fix:
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp
34: br0 veth0_br 224.1.1.1 temp
v2: Use json print lib as Stephen suggested.
v3: No need to use is_json_context() as print_string() could handle both cases.
v4: use new function print_nl() to print new line in non-json mode.
Reported-by: Ying Xu <yinxu@redhat.com>
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The output of vlan show was broken previous change to use json_print.
Clean the code up and return to original format.
Note: the JSON syntax has changed to make the bridge vlan
show more like other outputs (e.g. ip -j li show).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Rather than using is_json_context(), use the print_string functions
which handle both cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Change curly braces into brackets for -json option in help text to be
consistent with the rest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of calling enable_color() conditionally with identical check in
three places, introduce check_enable_color() which does it in one place.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is no point in calling enable_color() conditionally if it was
already called for each time '-color' flag was parsed. Align the
algorithm with that in ip and tc by actually making use of 'color'
variable.
Fixes: e9625d6aea ("Merge branch 'iproute2-master' into iproute2-next")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the new isolated port option which, if set,
would allow the isolated ports to communicate only with non-isolated
ports and the bridge device. The option can be set via the bridge or ip
link type bridge_slave commands, e.g.:
$ ip link set dev eth0 type bridge_slave isolated on
$ bridge link set dev eth0 isolated on
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
No 'g' to hairpin.
Fixes: 64108901b7 ("bridge: Add support for setting bridge port attributes")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
NTF_EXT_LEARNED can be set by a user on bridge fdb entry.
Provide a bridge command option to allow a user to set
NTF_EXT_LEARNED on a bridge fdb entry.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Prevent a double space in "bridge mdb show" when the MDB entry is not
marked as "offload".
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Even in brief mode the interface name should be printed
in color if desired. This makes output consistent across
regular and brief mode.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add json output for bridge link show command and reuse code
from ip command to display interface information.
This also changes the output format slightly for the non JSON case so
that it has same format as the ip link show command.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use new functions from json_print to simplify code.
Provide standard flag for colorizing output.
The shortened -c flag is ambiguous it could mean color or
compressvlan; it is now changed to mean color for consistency
with other iproute2 commands.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make bridge work like other iproute2 commands and accept
same json and pretty flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is at least three places implementing same things: two in
ipaddress.c print_linkinfo() & print_linkinfo_brief() and one in
bridge/link.c.
They are diverge from each other very little: bridge/link.c does not
support JSON output at the moment and print_linkinfo_brief() does not
handle IFLA_LINK_NETNS case.
Introduce and use print_name_and_link() routine to handle name@link
output in all possible variations; respect IFLA_LINK_NETNS attribute to
handle case when link is in different namespace; use ll_idx_n2a() for
interface name instead of "<nil>" to share logic with other code (e.g.
ll_name_to_index() and ll_index_to_name()) supporting such template.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Be consistent in handling of IFLA_IFNAME attribute in all places: if
there is no attribute report bug to stderr and use ll_idx_n2a() as
last measure to get name in "if%u" format instead of "<nil>".
Use check_ifname() to validate network device name: this catches both
unexpected return from kernel and ll_idx_n2a().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There are two reasons for switching to cached variant:
1) ll_index_to_name() may return result from cache,
eliminating expensive ioctl() to the kernel.
Note that most of the code already switched from plain
if_indextoname() to ll_index_to_name() to cached variant
in print path because in most cases cache populated.
2) It always return name in the form "if%d", even if
entry is not in cache and ioctl() fails. This drops
"link_index" from JSON output.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Any iproute utility that uses any function from lib/utils.c needs
to declare its own resolve_hosts variable instance although it does
not need/use hostname resolving functionality (currently only 'ip'
and 'ss' commands uses this).
The patch declares single common instance of resolve_hosts directly
in utils.c so the existing ones can be removed (the same approach
that is used for timestamp_short).
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
This config maps to IFLA_BRPORT_VLAN_TUNNEL bridge port netlink
flag attribute. This flag enables vlan to tunnel mapping on a bridge
port. It is off by default.
set vlan_tunnel attribute on bridge port vxlan0:
$ip link set dev vxlan0 type bridge_slave vlan_tunnel on
$ip link set dev vxlan0 type bridge_slave vlan_tunnel off
or via bridge command
$bridge link set dev vxlan0 vlan_tunnel on
$bridge link set dev vxlan0 vlan_tunnel off
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
