The RTM_NEWLINK message accepts ifi_index non-zero value and lets
creation of links with given index (if it's free, or course). This
functionality is available since linux-v3.5.
This patch makes this API available via ip tool.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Use warn_unused_result to enforce checking return value of rtnl_send,
and fix where the errors are.
Suggested by initial patch from Petr Písař <ppisar@redhat.com>
Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
This patch allows to manage ip tunnels via the interface ip link.
The syntax for parameters is the same that 'ip tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Added support to ipoib rtnl ops through which one can create, configure,
query and delete IPoIB devices, for example
$ ip link add link ib0.8001 name ib0.8001 type ipoib pkey 0x8001
$ ip link add link ib0.1 name ib0.1 type ipoib mode connected
$ ip --details link show dev ib0.1
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Define where is the are located the iproute2 config files.
Get rid of trailing slashes for paths in several file.
Signed-off-by: Christoph J. Thompson <cjsthompson@gmail.com>
The kernel supports a link mode attribute (which can be dormant or default).
This attribute is used to control how the link watch engine
handles operstate transistion.
This adds a new parameter to ip link command to allow setting and
displaying the value.
---
Change the order of evaluation of ip link type arguements to allow
changing parameters of gre tunnels.
The following wouldn't work:
# ip li add mytunnel type gretap remote 1.1.1.1 key 3
# ip li set mytunnel type gretap key 9
Both rtnl_talk and rtnl_dump had a callback for handling portions
of netlink message that do not match the correct pid or seq.
But this callback was never used by any part of iproute2 so remove
it.
Add ip link command parsing for VF spoof checking enable/disable
V2 - Fixed problem with parsing of dump info on kernels that don't
support the spoof checking option and also wrapped the ifla_vf_info
structure in #ifdef __KERNEL__ to prevent user space from directly
accessing the structure
V3 - Improved parsing of vfinfo
V4 - Put Makefile back to proper list of subdirs
V5 - Remove struct ifla_vf_info, it is only used by the kernel
V6 - Make sure spoof check is reported by the driver - rtnl will set
it to -1 to indicate driver didn't report a value.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add bridge as a supported type with 'ip link' in usage and all the missing
types in 'ip' man page. Also fixed some typos.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
The goal of this code change is to implement a mechanism such that it is
simple to work with a kernel that is using multiple network namespaces
at once.
This comes in handy for interacting with vpns where there may be rfc1918
address overlaps, and different policies default routes, name servers
and the like.
Configuration specific to a network namespace that would ordinarily be
stored under /etc/ is stored under /etc/netns/<name>. For example if
the dns server configuration is different for your vpn you would create
a file /etc/netns/myvpn/resolv.conf.
File descriptors that can be used to manipulate a network namespace can
be created by opening /var/run/netns/<NAME>.
This adds the following commands to iproute.
ip netns add NAME
ip netns delete NAME
ip netns monitor
ip netns list
ip netns exec NAME cmd ....
ip link set DEV netns NAME
ip netns exec exists to cater the vast majority of programs that only
know how to operate in a single network namespace. ip netns exec
changes the default network namespace, creates a new mount namespace,
remounts /sys and bind mounts netns specific configuration files to
their standard locations.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
This reverts commit 632110aa0d.
There seem to be some recent changes in the 802.1Qbh/bg specs which may
result in changes to this patch in the near future. It seems like its best
to ignore this patch for now.
I will re-spin at a later time when the changes in the specs converge.
BTW, Please let me know if I should CC netdev list and others on the
original email. I can resend this email.
Thanks,
Roopa
Resubmitting Scott Feldmans original patch with below changes
- Fix port profile strlen which was off by 1
- Added function to convert IFLA_PORT_RESPONSE codes to string
Add support for IFLA_VF_PORTS. VF port netlink msg layout is
[IFLA_NUM_VF]
[IFLA_VF_PORTS]
[IFLA_VF_PORT]
[IFLA_PORT_*], ...
[IFLA_VF_PORT]
[IFLA_PORT_*], ...
...
[IFLA_PORT_SELF]
[IFLA_PORT_*], ...
The iproute2 cmd line for link set is now:
Usage: ip link add link DEV [ name ] NAME
[ txqueuelen PACKETS ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
type TYPE [ ARGS ]
ip link delete DEV type TYPE [ ARGS ]
ip link set DEVICE [ { up | down } ]
[ arp { on | off } ]
[ dynamic { on | off } ]
[ multicast { on | off } ]
[ allmulticast { on | off } ]
[ promisc { on | off } ]
[ trailers { on | off } ]
[ txqueuelen PACKETS ]
[ name NEWNAME ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
[ netns PID ]
[ alias NAME ]
[ port MODE { PROFILE | VSI } ]
[ vf NUM [ mac LLADDR ]
[ vlan VLANID [ qos VLAN-QOS ] ]
[ rate TXRATE ]
[ port MODE { PROFILE | VSI } ] ]
ip link show [ DEVICE ]
TYPE := { vlan | veth | vcan | dummy | ifb | macvlan | can }
MODE := { assoc | preassoc | preassocrr | disassoc }
PROFILE := profile PROFILE
[ instance UUID ]
[ host UUID ]
VSI := vsi mgr MGRID type VTID ver VER
[ instance UUID ]
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
The kernel interface changed just before 2.6.34 was released. This brings
iproute2 in line with the current changes. The VF portion of setlink is
comprised of a set of nested attributes.
IFLA_VFINFO_LIST (NESTED)
IFLA_VF_INFO (NESTED)
IFLA_VF_MAC
IFLA_VF_VLAN
IFLA_VF_TX_RATE
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Add support to 'ip' for setting and showing SR-IOV virtual function
link parameters.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
On tor, 2009-04-30 at 14:32 +0100, Timothy Baldwin wrote:
> Package: iproute
> Version: 20090324-1
> Severity: minor
>
>
> $ ip link set eth0 address help
> "help" is invalid lladdr.
> Segmentation fault
>
> Desipte the invalid command line arguments it shouldn't crash.
>
Callers need to check return value from ll_addr_a2n(). Patch below.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Hello Stephen,
thanks für the commit of my last CAN patch.
Today i got a hint, that the help text of 'ip link' can be improved also.
Many thanks!
Oliver
Signed-Off-By: Oliver Hartkopp <oliver@hartkopp.net>
This is a variant of Patrick McHardy patch for help text.
Add help for ip link add and ip link delete.
The help conditional on what the kernel supports.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Fix confusing error message noticed by Martin Josefsson:
Fix typo noticed by Phil Oester: information vs. informatin
# ip link add
RTNETLINK answers: Operation not supported
The reason is missing device type information, refuse this and print a message.
Signed-off-by: Patrick McHardy <kaber@trash.net>
For some reason "ip link add help" is currently not supported when using
the new rtnl_link API. Fix that.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Hello Rafael Almeida.
I noticed your patch adding DESTDIR support in the latest iproute2 release.
Much appreciated! Soon the debian packages might be able to move to actually
using "make install" rather then it's own installation procedure when
building packages. I've noticed something that will break though....
Debian packages usually sets DESTDIR=debian/tmp/ and packages the contents
of that directory as if it where the root file system. This will break
the /usr/lib/{tc,ip}/ module loading, because they DESTDIR (/usr) will be
/whatever-the-build-path-was/debian/tmp/lib/{tc,ip}/.
I beleive others usually call this the LIBDIR to make the separation between
DISTDIR being the (possibly temporary) place things are put when build is
done, and LIBDIR (and others) are used for actual runtime paths.
I'm attaching a patch that I think fixes this, but would be really happy if
you could have a look at to verify I'm not screwing something up.
--
Regards,
Andreas Henriksson
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
After changing the DESTDIR the installated binaries have some issues
due to hard coded paths. For example, using distributions on NetEm
would segfault.
I've changed iplink.c and tc_util.c so they are now aware of DESTDIR.
Along with that change I needed to change the main Makefile so it
defines the DESTDIR macro when calling gcc.
I also changed the paths so that during the installation sbin, etc,
share and lib directories are created directly inside of the DESTDIR,
instead of creating a usr directory inside that. That's the behaviour
of most packages out there, so I think most users will be expecting
that to happen.
Hi Stephen,
I resend you this patch once more. This time I updated the documentation
too (may be that was the reason why you didn't take it before?).
Please tell me if there are other things missing in this patch
It applies on iproute2 git tree.
Regards,
Benjamin
Description:
------------
This patch adds support for the IFLA_NET_NS_PID type. It is used to
move network devices between network namespaces.
The syntax is:
ip link set DEVICE netns PID
PID is the pid of a process in the target network namespace.
(Daniel Lezcano is the original author).
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
This routine parses CLI attributes, describing generic link
parameters such as name, address, etc.
This is mostly copy-pasted from iplink_modify().
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Arkadiusz Miskiewicz wrote:
> People are reporting that
>> ip link set multicast on dev eth0 (Invalid argument)
>> no longer works when using iproute 2.6.23 on kernel 2.6.21.
>>
>> On my testing machine it also fails:
>> # ./ip link set eth0 multicast on
>> RTNETLINK answers: Invalid argument
It seems it fails to properly detect that your kernel is missing
RTM_NEWLINK support. Apparently the reason is that the kernels
I tested with return a different error in this situation.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Andreas Henriksson wrote:
> From: Alexander Wirt <formorer@debian.org>
>
>
> Signed-off-by: Andreas Henriksson <andreas@fatal.se>
> ---
> ip/iplink.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/ip/iplink.c b/ip/iplink.c
> index 4060845..da1f64e 100644
> --- a/ip/iplink.c
> +++ b/ip/iplink.c
> @@ -670,6 +670,10 @@ static int do_set(int argc, char **argv)
> }
>
> if (newname && strcmp(dev, newname)) {
> + if (strlen(newname) == 0) {
> + printf("\"\" is not valid device identifier\n");
> + return -1;
> + }
Indentation fixed, same change for the non-ioctl case, use invarg.
While I'm at it I also fixed the error message for "name too long",
*argv is NULL at this point.
Signed-off-by: Patrick McHardy <kaber@trash.net>
