Add rtnl_neighdump_req for neighbor dumps using the proper ndmsg
as the header. Convert existing rtnl_wilddump_request for RTM_GETNEIGH
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_ruledump_req for fib fule dumps using the proper fib_rule_hdr
as the header. Convert existing RTM_GETRULE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_netconfdump_req for netconf dumps using the proper netconfmsg
as the header. Convert existing RTM_GETNETCONF dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrlbldump_req for address label dumps using the proper
ifaddrlblmsg as the header. Convert existing RTM_GETADDRALBEL dumps
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrdump_req for address dumps using the proper ifaddrmsg
as the header. Convert existing RTM_GETADDR dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
ip/iproute_lwtunnel.c
In addition to merge conflict between bd59e5b151 and 94a8722f2f,
updated the code added by the latter commit based on the change of the
former (ie., added ret = to the new rta_addattr_l).
Signed-off-by: David Ahern <dsahern@gmail.com>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Using a 32 bit field to represent time in nanoseconds results in a
maximum value of about 4.3 seconds, which is well below many observed
delays in WiFi and LTE, and barely in the ballpark for a trip past the
Earth's moon, Luna.
Using 64 bit time fields in nanoseconds allows us to simulate
network diameters of several hundred light-years. However, only
conversions to and from ns, us, ms, and seconds are provided.
The iproute2 64 bit api uses signed values for time. Being able to
represent positive or negative time allows us to calculate +/- deltas
between, for example, the CLOCK_TAI and CLOCK_REALTIME clocks.
Time related utility functions in tc_util.c are moved to lib/utils.c.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As suggested, turn return code into true/false although it's not checked
anywhere yet.
Fixes: 4d82962ccc ("Merge common code for conditionally colored output")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of calling enable_color() conditionally with identical check in
three places, introduce check_enable_color() which does it in one place.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement loading of .BTF section from object file and build up
internal table for retrieving key/value id related to maps in
the BPF program. Latter is done by setting up struct btf_type
table.
One of the issues is that there's a disconnect between the data
types used in the map and struct bpf_elf_map, meaning the underlying
types are unknown from the map description. One way to overcome
this is to add a annotation such that the loader will recognize
the relation to both. BPF_ANNOTATE_KV_PAIR(map_foo, struct key,
struct val); has been added to the API that programs can use.
The loader will then pick the corresponding key/value type ids and
attach it to the maps for creation. This can later on be dumped via
bpftool for introspection.
Example with test_xdp_noinline.o from kernel selftests:
[...]
struct ctl_value {
union {
__u64 value;
__u32 ifindex;
__u8 mac[6];
};
};
struct bpf_map_def __attribute__ ((section("maps"), used)) ctl_array = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(__u32),
.value_size = sizeof(struct ctl_value),
.max_entries = 16,
.map_flags = 0,
};
BPF_ANNOTATE_KV_PAIR(ctl_array, __u32, struct ctl_value);
[...]
Above could also further be wrapped in a macro. Compiling through LLVM and
converting to BTF:
# llc --version
LLVM (http://llvm.org/):
LLVM version 7.0.0svn
Optimized build.
Default target: x86_64-unknown-linux-gnu
Host CPU: skylake
Registered Targets:
bpf - BPF (host endian)
bpfeb - BPF (big endian)
bpfel - BPF (little endian)
[...]
# clang [...] -O2 -target bpf -g -emit-llvm -c test_xdp_noinline.c -o - |
llc -march=bpf -mcpu=probe -mattr=dwarfris -filetype=obj -o test_xdp_noinline.o
# pahole -J test_xdp_noinline.o
Checking pahole dump of BPF object file:
# file test_xdp_noinline.o
test_xdp_noinline.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), with debug_info, not stripped
# pahole test_xdp_noinline.o
[...]
struct ctl_value {
union {
__u64 value; /* 0 8 */
__u32 ifindex; /* 0 4 */
__u8 mac[0]; /* 0 0 */
}; /* 0 8 */
/* size: 8, cachelines: 1, members: 1 */
/* last cacheline: 8 bytes */
};
Now loading into kernel and dumping the map via bpftool:
# ip -force link set dev lo xdp obj test_xdp_noinline.o sec xdp-test
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 xdpgeneric/id:227 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
[...]
# bpftool prog show id 227
227: xdp tag a85e060c275c5616 gpl
loaded_at 2018-07-17T14:41:29+0000 uid 0
xlated 8152B not jited memlock 12288B map_ids 381,385,386,382,384,383
# bpftool map dump id 386
[{
"key": 0,
"value": {
"": {
"value": 0,
"ifindex": 0,
"mac": []
}
}
},{
"key": 1,
"value": {
"": {
"value": 0,
"ifindex": 0,
"mac": []
}
}
},{
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Import btf.h from kernel headers at commit
2aa4a3378ad0 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
which is the last sync point.
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently NETNS_RUN_DIR is hardcoded and refers to /var/run/netns.
However, some systems (e.g. Android) doesn't have /var
which results in error attempts to create network namespaces on these
systems. This change makes NETNS_RUN_DIR configurable at build time
by allowing to pass environment variable to make command.
Also, this change makes /etc/netns directory configurable through
NETNS_ETC_DIR environment variable.
For example: ./configure && NETNS_RUN_DIR=/mnt/vendor/netns make
Tested: verified that iproute2 with configuration mentioned above
creates namespaces in /mnt/vendor/netns
Signed-off-by: Pavel Maltsev <pavelm@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Part of upstream commit
4bbb3e0e8239 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
