The default behavior for source MACVLAN is to duplicate packets to
appropriate type source devices, and then do the normal destination MACVLAN
flow. This patch adds an option to skip destination MACVLAN processing if
any matching source MACVLAN device has the option set.
This allows setting up a "catch all" device for source MACVLAN: create one
or more devices with type source nodst, and one device with e.g. type vepa,
and incoming traffic will be received on exactly one device.
Signed-off-by: Jethro Beekman <kernel@jbeekman.nl>
Signed-off-by: David Ahern <dsahern@kernel.org>
Sample output:
$ rdma res show srq
dev ibp8s0f0 srqn 0 type BASIC pdn 3 comm [ib_ipoib]
dev ibp8s0f0 srqn 4 type BASIC lqpn 125-128,130-140 pdn 9 pid 3581 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 5 type BASIC lqpn 141-156 pdn 10 pid 3584 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 6 type BASIC lqpn 157-172 pdn 11 pid 3590 comm ibv_srq_pingpon
dev ibp8s0f1 srqn 0 type BASIC pdn 3 comm [ib_ipoib]
dev ibp8s0f1 srqn 1 type BASIC lqpn 329-344 pdn 4 pid 3586 comm ibv_srq_pingpon
$ rdma res show srq lqpn 126-141
dev ibp8s0f0 srqn 4 type BASIC lqpn 126-128,130-140 pdn 9 pid 3581 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 5 type BASIC lqpn 141 pdn 10 pid 3584 comm ibv_srq_pingpon
$ rdma res show srq lqpn 127
dev ibp8s0f0 srqn 4 type BASIC lqpn 127 pdn 9 pid 3581 comm ibv_srq_pingpon
Reviewed-by: Ido Kalir <idok@nvidia.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Sample output:
$ rdma res show ctx
dev ibp8s0f0 ctxn 0 pid 980 comm ibv_rc_pingpong
dev ibp8s0f0 ctxn 1 pid 981 comm ibv_rc_pingpong
dev ibp8s0f0 ctxn 2 pid 992 comm ibv_rc_pingpong
dev ibp8s0f1 ctxn 0 pid 984 comm ibv_rc_pingpong
dev ibp8s0f1 ctxn 1 pid 987 comm ibv_rc_pingpong
$ rdma res show ctx dev ibp8s0f1
dev ibp8s0f1 ctxn 0 pid 984 comm ibv_rc_pingpong
dev ibp8s0f1 ctxn 1 pid 987 comm ibv_rc_pingpong
Reviewed-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Ido Kalir <idok@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for vlan activity monitoring, we display vlan notifications on
vlan add/del/options change. The man page and help are also updated
accordingly.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Use the new bridge vlan rtm dump helper to dump all of the available
vlan information when -details (-d) is used with vlan show. It is also
capable of dumping vlan stats if -statistics (-s) is added.
Currently this is the only interface capable of dumping per-vlan
options. The vlan dump format is compatible with current vlan show, it
uses the same helpers to dump vlan information. The new addition is one
line which will contain the per-vlan options (similar to ip -d link show
for ports). Currently only the vlan STP state is printed.
The call uses compressed vlan format by default.
Example:
$ bridge -s -d vlan show
port vlan-id
virbr1 1 PVID Egress Untagged
state forwarding
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a new per-vlan option set command. It allows to manipulate vlan
options, those can be bridge-wide or per-port depending on what device
is specified. The first option that can be set is the vlan STP state,
it is identical to the bridge port STP state. The man page is also
updated accordingly.
Example:
$ bridge vlan set vid 10 dev br0 state learning
or a range:
$ bridge vlan set vid 10-20 dev swp1 state blocking
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This adds iproute2 support for mptcp event monitoring, e.g. creation,
establishment, address announcements from the peer, subflow establishment
and so on.
While the kernel-generated events are primarily aimed at mptcpd (e.g. for
subflow management), this is also useful for debugging.
This adds print support for the existing events.
Sample output of 'ip mptcp monitor':
[ CREATED] token=83f3a692 remid=0 locid=0 saddr4=10.0.1.2 daddr4=10.0.1.1 sport=58710 dport=10011
[ ESTABLISHED] token=83f3a692 remid=0 locid=0 saddr4=10.0.1.2 daddr4=10.0.1.1 sport=58710 dport=10011
[SF_ESTABLISHED] token=83f3a692 remid=0 locid=1 saddr4=10.0.2.2 daddr4=10.0.1.1 sport=40195 dport=10011 backup=0
[ CLOSED] token=83f3a692
Signed-off-by: Florian Westphal <fw@strlen.de>
Allow a policer action to enforce a rate-limit based on packets-per-second,
configurable using a packet-per-second rate and burst parameters.
e.g.
# $TC actions add action police pkts_rate 1000 pkts_burst 200 index 1
# $TC actions ls action police
total acts 1
action order 0: police 0x1 rate 0bit burst 0b mtu 4096Mb pkts_rate 1000 pkts_burst 200
ref 1 bind 0
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds support for setting and displaying the Traffic Flow
Confidentiality attribute for an XFRM state, which allows padding ESP
packets to a specified length.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add ability to dump multiple nexthop buckets and get a specific one.
Example:
# ip nexthop add id 10 group 1/2 type resilient buckets 8
# ip nexthop
id 1 via 192.0.2.2 dev dummy10 scope link
id 2 via 192.0.2.19 dev dummy20 scope link
id 10 group 1/2 type resilient buckets 8 idle_timer 120 unbalanced_timer 0 unbalanced_time 0
# ip nexthop bucket
id 10 index 0 idle_time 28.1 nhid 2
id 10 index 1 idle_time 28.1 nhid 2
id 10 index 2 idle_time 28.1 nhid 2
id 10 index 3 idle_time 28.1 nhid 2
id 10 index 4 idle_time 28.1 nhid 1
id 10 index 5 idle_time 28.1 nhid 1
id 10 index 6 idle_time 28.1 nhid 1
id 10 index 7 idle_time 28.1 nhid 1
# ip nexthop bucket show nhid 1
id 10 index 4 idle_time 53.59 nhid 1
id 10 index 5 idle_time 53.59 nhid 1
id 10 index 6 idle_time 53.59 nhid 1
id 10 index 7 idle_time 53.59 nhid 1
# ip nexthop bucket get id 10 index 5
id 10 index 5 idle_time 81 nhid 1
# ip -j -p nexthop bucket get id 10 index 5
[ {
"id": 10,
"bucket": {
"index": 5,
"idle_time": 104.89,
"nhid": 1
},
"flags": [ ]
} ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add ability to configure resilient nexthop groups and show their current
configuration. Example:
# ip nexthop add id 10 group 1/2 type resilient buckets 8
# ip nexthop show id 10
id 10 group 1/2 type resilient buckets 8 idle_timer 120 unbalanced_timer 0
# ip -j -p nexthop show id 10
[ {
"id": 10,
"group": [ {
"id": 1
},{
"id": 2
} ],
"type": "resilient",
"resilient_args": {
"buckets": 8,
"idle_timer": 120,
"unbalanced_timer": 0
},
"flags": [ ]
} ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Next patches are going to add a 'resilient' nexthop group type, so allow
users to specify the type using the 'type' argument. Currently, only
'mpath' type is supported.
These two commands are equivalent:
# ip nexthop add id 10 group 1/2/3
# ip nexthop add id 10 group 1/2/3 type mpath
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The feature is supported by the kernel since 5.11-net-next,
let's allow user-space to use it.
Just parse and dump an additional, per endpoint, u16 attribute
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Talking to varios people, it became apparent that there is a certain
ambiguity in the description of these flags. They refer to egress
flooding, which should perhaps be stated more clearly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The "usually hardware" and "usually software" distinctions make no
sense, try to clarify what these do based on the actual kernel behavior.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge program does:
fdb_modify:
/* Assume self */
if (!(req.ndm.ndm_flags&(NTF_SELF|NTF_MASTER)))
req.ndm.ndm_flags |= NTF_SELF;
which is clearly against the documented behavior. The only thing we can
do, sadly, is update the documentation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Explaining the "local" flag by saying that it is "a local permanent fdb
entry" is not very helpful, be more specific.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge does this:
fdb_modify:
/* Assume permanent */
if (!(req.ndm.ndm_state&(NUD_PERMANENT|NUD_REACHABLE)))
req.ndm.ndm_state |= NUD_PERMANENT;
So let's make the user aware of the fact that if they don't want local
entries, they need to specify some other flag like "static".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge program parses "local" and "permanent" in just the same way,
so it makes sense to tell that to users:
fdb_modify:
} else if (matches(*argv, "local") == 0 ||
matches(*argv, "permanent") == 0) {
req.ndm.ndm_state |= NUD_PERMANENT;
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add implementation for the port parameters
getting/setting.
Add bash completion for port param.
Add man description for port param.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David Ahern <dsahern@kernel.org>
vdpa tool is created to create, delete and query vdpa devices.
examples:
Show vdpa management device that supports creating, deleting vdpa devices.
$ vdpa mgmtdev show
vdpasim:
supported_classes net
$ vdpa mgmtdev show -jp
{
"show": {
"vdpasim": {
"supported_classes": [ "net" ]
}
}
}
Create a vdpa device of type networking named as "foo2" from
the management device vdpasim_net:
$ vdpa dev add mgmtdev vdpasim_net name foo2
Show the newly created vdpa device by its name:
$ vdpa dev show foo2
foo2: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 2 max_vq_size 256
$ vdpa dev show foo2 -jp
{
"dev": {
"foo2": {
"type": "network",
"mgmtdev": "vdpasim_net",
"vendor_id": 0,
"max_vqs": 2,
"max_vq_size": 256
}
}
}
Delete the vdpa device after its use:
$ vdpa dev del foo2
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
In creating documentation for expressions I ran into an interesting case
where if you use two different familie types in the expression, such as
in `ss 'sport inet:ssh or src unix:/run/*'`, then you would only get the
results for one address family (in this case unix sockets).
The reason is that in parse_hostcond if the family is specified we
remove any previously added families from filter->families, and
preserve the "states" if any states are set. I tried changing this to
not reset the families, but ran into some issues with Invalid Argument
errors in inet_show_netlink, I think related to the state.
I can dig into that more if supporting this is useful, but I'm not sure
if these types of expressions would actually be useful in practice. Or
perhaps an error should be given if an expression contains conditions
with multiple families (besides inet and inet6)?
Anyway, for now, this patch just notes the limitation in the man page.
Signed-off-by: Thayne McCombs <astrothayne@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This adds some documentation of the syntax for the FILTER argument to
the ss command to the ss (8) man page.
Signed-off-by: Thayne McCombs <astrothayne@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since this feature's introduction in commit 9c66d1564676 ("taprio: Add
support for hardware offloading") from kernel v5.4, it never got
documented in the man pages. Due to this reason, we see customer reports
of seemingly contradictory information: the community manpages claim
there is no support for full offload, nonetheless many silicon vendors
have already implemented it.
This patch documents the full offload feature (enabled by specifying
"flags 2" to the taprio qdisc) and gives one more example that tries to
illustrate some of the finer points related to the usage.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
* Fix PROTO description in help message (mpls isn't a valid argument).
* Remove SRCPORTMIN description from help message since it doesn't
appear in the syntax string.
* Use same keywords in help message and in man page.
* Use the "ethertype" option name (.B ethertype) rather than the
option value (.I ETHERTYPE) in the man page description of
[no]multiproto.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Support set operation of the devlink port function state.
Example of a PCI SF port function which supports the state:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Enable user to add and delete the devlink port.
Examples for adding and deleting one SF port:
Examples of add, show and delete commands:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
Add devlink port of flavour 'pcipf' for PF number 0 SF number 88:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
Delete newly added devlink port
$ devlink port del pci/0000:06:00.0/32768
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The Linux DCBX object is a 1-byte bitfield of flags that configure whether
the DCBX protocol is implemented in the device or in the host, and which
version of the protocol should be used. Add a tool to access the per-port
Linux DCBX object.
For example:
# dcb dcbx set dev eni1np1 host ieee
# dcb dcbx show dev eni1np1
host ieee
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
DCB APP interfaces are standardized in 802.1q-2018, and allow configuration
of traffic prioritization rules based on several possible headers.
Add a dcb subtool for maintenance and display of the APP table. For
example:
# dcb app add dev eni1np1 dscp-prio 0:0 CS3:3 CS6:6
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS6:6
# dcb app add dev eni1np1 dscp-prio CS3:4
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS3:4 CS6:6
# dcb app replace dev eni1np1 dscp-prio CS3:5
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:5 CS6:6
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Some DSCP values can be translated to symbolic names. That may not be
always desirable. Introduce a command-line option similar to other tools,
-N or --Numeric, to suppress this translation.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This to keep compatible with the major tools, ip and tc. Also
document the option in the man page, which was neglected.
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch allows the user to set and retrieve the
IFLA_MACVLAN_BC_QUEUE_LEN parameter via the bcqueuelen
command line argument
This parameter controls the requested size of the queue for
broadcast and multicast packages in the macvlan driver.
If not specified, the driver default (1000) will be used.
Note: The request is per macvlan but the actually used queue
length per port is the maximum of any request to any macvlan
connected to the same port.
For this reason, the used queue length IFLA_MACVLAN_BC_QUEUE_LEN_USED
is also retrieved and displayed in order to aid in the understanding
of the setting. However, it can of course not be directly set.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Signed-off-by: David Ahern <dsahern@gmail.com>
Commit 924c43778a ("man: tc-ct.8: Add manual page for ct tc action")
add man page for tc-ct, but it brings with it a bogus block of text
in the benning of tc-flower man page.
This commit simply removes it.
Fixes: 924c43778a ("man: tc-ct.8: Add manual page for ct tc action")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DCBNL maxrate interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of rate with which traffic in a given traffic class is
sent.
Add a dcb subtool to allow showing and tweaking of this per-TC maximum
rate. For example:
# dcb maxrate show dev eni1np1
tc-maxrate 0:25Gbit 1:25Gbit 2:25Gbit 3:25Gbit 4:25Gbit 5:25Gbit 6:100Gbit 7:25Gbit
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
DCBNL buffer interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of port headroom buffers.
Add a dcb subtool to allow showing and tweaking of buffer priority mapping
and buffer sizes. For example:
# dcb buf show dev eni1np1
prio-buffer 0:0 1:0 2:0 3:3 4:0 5:0 6:6 7:0
buffer-size 0:10000 1:0 2:0 3:70000 4:0 5:0 6:10000 7:0
total-size 221072
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow switching "dcb" into the ISO/IEC mode of units by passing -i.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow selective display of statistical counters by passing -s.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
None, one, or many parameters can be given on the command line, but
the current synopsis allows only none or one. Fix it.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add reload action and reload limit to devlink reload command to enable
the user to select the reload action required and constrains limits on
these actions that he may want to ensure.
The following reload actions are supported:
driver_reinit: driver entities re-initialization, applying
devlink-param and devlink-resource values.
fw_activate: firmware activate.
The uAPI is backward compatible, if the reload action option is omitted
from the reload command, the driver reinit action will be used.
Note that when required to do firmware activation some drivers may need
to reload the driver. On the other hand some drivers may need to reset
the firmware to reinitialize the driver entities. Therefore, the devlink
reload command returns the actions which were actually performed.
By default reload actions are not limited and driver implementation may
include reset or downtime as needed to perform the actions. However, if
reload limit is selected, the driver should perform only if it can do it
while keeping the limit constraints.
Reload limit added:
no_reset: No reset allowed, no down time allowed, no link flap and no
configuration is lost.
Command examples:
$devlink dev reload pci/0000:82:00.0 action driver_reinit
reload_actions_performed:
driver_reinit
$devlink dev reload pci/0000:82:00.0 action fw_activate
reload_actions_performed:
driver_reinit fw_activate
devlink dev reload pci/0000:82:00.1 action driver_reinit -jp
{
"reload": {
"reload_actions_performed": [ "driver_reinit" ]
}
}
devlink dev reload pci/0000:82:00.0 action fw_activate -jp
{
"reload": {
"reload_actions_performed": [ "driver_reinit","fw_activate" ]
}
}
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement support for action terse dump using new TCA_ACT_FLAG_TERSE_DUMP
value of TCA_ROOT_FLAGS tlv. Set the flag when user requested it with
following example CLI (-br for 'brief'):
$ tc -s -br actions ls action tunnel_key
total acts 2
action order 0: tunnel_key index 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
action order 1: tunnel_key index 2
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
action (kind, index) and stats, if requested by the user.
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Extend the 'bridge mdb' command for the following syntax:
bridge mdb add dev br0 port swp0 grp 01:02:03:04:05:06 permanent
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The Linux DCB interface allows configuration of a broad range of
hardware-specific attributes, such as TC scheduling, flow control, per-port
buffer configuration, TC rate, etc. Add a new tool to show that
configuration and tweak it.
DCB allows configuration of several objects, and possibly could expand to
pre-standard CEE interfaces. Therefore the tool itself is a lean shell that
dispatches to subtools each dedicated to one of the objects.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Manpage:
* Remove the extra "and to ip packets" part from command description
to make it more understandable.
* Redirect packets to eth1, instead of eth0, as told in the
description.
Help string:
* "mpls pop" can be followed by a CONTROL keyword.
* "mpls modify" can also set the MPLS_BOS field.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement support for classifier/action terse dump using new TCA_DUMP_FLAGS
tlv with only available flag value TCA_DUMP_FLAGS_TERSE. Set the flag when
user requested it with following example CLI (-br for 'brief'):
$ tc -s -br filter show dev ens1f0 ingress
filter protocol ip pref 49151 flower chain 0
filter protocol ip pref 49151 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
filter protocol ip pref 49152 flower chain 0
filter protocol ip pref 49152 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
filter and action (handle, cookie, etc.) and stats, if requested by the
user. The intention is to significantly improve rule dump rate by omitting
all static data that do not change after rule is created.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_MPLS_ACT_MAC_PUSH action (kernel commit
a45294af9e96 ("net/sched: act_mpls: Add action to push MPLS LSE before
Ethernet header")). This action let TC push an MPLS header before the
MAC header of a frame.
Example (encapsulate all outgoing frames with label 20, then add an
outer Ethernet header):
# tc filter add dev ethX matchall \
action mpls mac_push label 20 ttl 64 \
action vlan push_eth dst_mac 0a:00:00:00:00:02 \
src_mac 0a:00:00:00:00:01
This patch also adds an alias for ETH_P_TEB, since it is useful when
decapsulating MPLS packets that contain an Ethernet frame.
With MAC_PUSH, there's no previous Ethertype to modify. However, the
"protocol" option is still needed, because the kernel uses it to set
skb->protocol. So rename can_modify_ethtype() to can_set_ethtype().
Also add a test suite for m_mpls, which covers the new action and the
pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH
actions (kernel commit 19fbcb36a39e ("net/sched: act_vlan:
Add {POP,PUSH}_ETH actions"). These action let TC remove or add the
Ethernet at the head of a frame.
Drop an Ethernet header:
# tc filter add dev ethX matchall action vlan pop_eth
Push an Ethernet header (the original frame must have no MAC header):
# tc filter add dev ethX matchall action vlan \
push_eth dst_mac 0a:00:00:00:00:02 src_mac 0a:00:00:00:00:01
Also add a test suite for m_vlan, which covers these new actions and
the pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds the user-space control and dump of mdb entry source
address. When setting the new MDBA_SET_ENTRY_ATTRS nested attribute is
used and inside is added MDBE_ATTR_SOURCE based on the address family.
When dumping we look for MDBA_MDB_EATTR_SOURCE and if present we add the
"src x.x.x.x" output. The source address will be always shown as it's
needed to match the entry to modify it from user-space.
Example:
$ bridge mdb add dev bridge port ens13 grp 239.0.0.1 src 1.2.3.4 permanent vid 100
$ bridge mdb show
dev bridge port ens13 grp 239.0.0.1 src 1.2.3.4 permanent vid 100
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The XFRMA_SET_MARK_MASK attribute can be set in states (4.19+)
It is optional and the kernel default is 0xffffffff
It is the mask of XFRMA_SET_MARK(a.k.a. XFRMA_OUTPUT_MARK in 4.18)
e.g.
./ip/ip xfrm state add output-mark 0x6 mask 0xab proto esp \
auth digest_null 0 enc cipher_null ''
ip xfrm state
src 0.0.0.0 dst 0.0.0.0
proto esp spi 0x00000000 reqid 0 mode transport
replay-window 0
output-mark 0x6/0xab
auth-trunc digest_null 0x30 0
enc ecb(cipher_null)
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
sel src 0.0.0.0/0 dst 0.0.0.0/0
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add health reporter test command and allow user to trigger a test event.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Added description of link flags allmulticast, promisc and trailers.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This commit adds support to expose the following inet socket options:
-- recverr
-- is_icsk
-- freebind
-- hdrincl
-- mc_loop
-- transparent
-- mc_all
-- nodefrag
-- bind_address_no_port
-- recverr_rfc4884
-- defer_connect
with the option --inet-sockopt. The individual option is only shown
when set.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for recently
added link IFLA_PROTO_DOWN_REASON attribute.
IFLA_PROTO_DOWN_REASON enumerates reasons
for the already existing IFLA_PROTO_DOWN link
attribute.
$ cat /etc/iproute2/protodown_reasons.d/r.conf
0 mlag
1 evpn
2 vrrp
3 psecurity
$ ip link set dev vx10 protodown on protodown_reason vrrp on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"proto_down_reason": [ "vrrp" ]
} ]
$ip link set dev vx10 protodown_reason mlag on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <mlag,vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"protodown_reason": [ "mlag","vrrp" ]
} ]
$ip -p -j link show dev vx10
$ip link set dev vx10 protodown off protodown_reason vrrp off
Error: Cannot clear protodown, active reasons.
$ip link set dev vx10 protodown off protodown_reason mlag off
$
Note: for somereason the json and non-json key for protodown
are different (protodown and proto_down). I have kept the
same for protodown reason for consistency (protodown_reason and
proto_down_reason).
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
PRP support requires a proto parameter which is 0 for hsr and 1 for
prp. Default is hsr and is backward compatible.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Document the new supported criteria of auto mode. Examples:
$ rdma statistic qp set link mlx5_2/1 auto pid on
$ rdma statistic qp set link mlx5_2/1 auto pid,type on
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Ido Kalir <idok@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This flag allows to create SA where sequence number can cycle in
outbound packets if set.
Signed-off-by: Petr Vaněk <pv@excello.cz>
Signed-off-by: David Ahern <dsahern@kernel.org>
In most of cases a user wants to see only the dynamic mac addresses
in the fdb output. But currently the 'fdb show' displays tons of
various self entries, those only waste the output without any useful
goal.
New option 'dynamic' for 'show' and 'get' commands forces display
only relevant records.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To improve the usability better use case-insensitive pattern-matching
in ifstat, nstat and ss tools.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The XFRMA_IF_ID attribute is set in policies for them to be
associated with an XFRM interface (4.19+).
Add support for getting/deleting policies with this attribute.
For supporting 'deleteall' the XFRMA_IF_ID attribute needs to be
explicitly copied.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In commit aed63ae1ac ("ip xfrm: support setting/printing XFRMA_IF_ID attribute in states/policies")
I added the ability to set/print the xfrm interface ID without updating
the man page.
Fixes: aed63ae1ac ("ip xfrm: support setting/printing XFRMA_IF_ID attribute in states/policies")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When setting a policer to a trap group, a value of "0" will unbind the
currently bound policer from the group.
The behavior is intentional and tested in kernel selftests, so document
it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: Alex Kushnarov <alexanderk@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add the new "mpls" keyword that can be used to match MPLS fields in
arbitrary Label Stack Entries.
LSEs are introduced by the "lse" keyword and followed by LSE options:
"depth", "label", "tc", "bos" and "ttl". The depth is manadtory, the
other options are optionals.
For example, the following filter drops MPLS packets having two labels,
where the first label is 21 and has TTL 64 and the second label is 22:
$ tc filter add dev ethX ingress proto mpls_uc flower mpls \
lse depth 1 label 21 ttl 64 \
lse depth 2 label 22 bos 1 \
action drop
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Bareudp devices provide a generic L3 encapsulation for tunnelling
different protocols like MPLS, IP, NSH, etc. inside a UDP tunnel.
This patch is based on original work from Martin Varghese:
https://lore.kernel.org/netdev/1570532361-15163-1-git-send-email-martinvarghesenokia@gmail.com/
Examples:
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc
This creates a bareudp tunnel device which tunnels L3 traffic with
ethertype 0x8847 (unicast MPLS traffic). The destination port of the
UDP header will be set to 6635. The device will listen on UDP port 6635
to receive traffic.
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype ipv4 multiproto
Same as the MPLS example, but for IPv4. The "multiproto" keyword allows
the device to also tunnel IPv6 traffic.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before can be possible show only all qeueue disciplines on an interface.
There wasn't a way to get the qdisc info by handle or parent, only full
dump of the disciplines with a following grep/sed usage.
Now new and old options work as expected to filter a qdisc by handle or
parent.
Full syntax of the qdisc show command:
tc qdisc { show | list } [ dev STRING ] [ QDISC_ID ] [ invisible ]
QDISC_ID := { root | ingress | handle QHANDLE | parent CLASSID }
This change doesn't require any changes in the kernel.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single font macro for a single argument.
Remove unnecessary quotes for a single-font macro.
Join two lines into one.
The output of "nroff" and "groff" is unchanged.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for one argument.
Remove unnecessary quotes for a single font macro.
Join some lines into one.
The output of "nroff" and "groff" is unchanged, except for a font
change in two lines.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for a single argument
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for a single argument.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Typeset section numbers in roman font, see man-pages(7).
###
Details:
Output is from: test-groff -b -mandoc -T utf8 -rF0 -t -w w -z
[ "test-groff" is a developmental version of "groff" ]
<./man/man3/libnetlink.3>:53 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:132 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:134 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:197 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:198 (macro BR): only 1 argument, but more are expected
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Add 'raw' argument to get the resource in raw format.
When RDMA_NLDEV_ATTR_RES_RAW is set in the netlink message,
then the resource fields are in raw format, print it as byte array.
Example:
$rdma res show qp link rocep0s12f0/1 lqpn 1137 -j -r
[{"ifindex":7,"ifname":"mlx5_1","port":1,
"data":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,...]}]
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The "early_drop" qevent matches packets that have been early-dropped. The
"mark" qevent matches packets that have been ECN-marked.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds support to assign a nexthop group
id to an fdb entry.
$bridge fdb add 02:02:00:00:00:13 dev vx10 nhid 102 self
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support to add and delete
ecmp nexthops of type fdb. Such nexthops can
be linked to vxlan fdb entries.
$ip nexthop add id 12 via 172.16.1.2 fdb
$ip nexthop add id 13 via 172.16.1.3 fdb
$ip nexthop add id 102 group 12/13 fdb
$bridge fdb add 02:02:00:00:00:13 dev vx10 nhid 102 self
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
optimistic DAD is controllable via sysctl for an interface
or all interfaces on the system. This would affect addresses
added by the kernel only.
Recent kernels, however, have enabled support for adding optimistic
address via userspace. This plumbs that support.
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch introduces two new features: obtaining cgroup information and
filtering sockets by cgroups. These features work based on cgroup v2 ID
field in the socket (kernel should be compiled with CONFIG_SOCK_CGROUP_DATA).
Cgroup information can be obtained by specifying --cgroup flag and now contains
only pathname. For faster pathname lookups cgroup cache is implemented. This
cache is filled on ss startup and missed entries are resolved and saved
on the fly.
Cgroup filter extends EXPRESSION and allows to specify cgroup pathname
(relative or absolute) to obtain sockets attached only to this cgroup.
Filter syntax: ss [ cgroup PATHNAME ]
Examples:
ss -a cgroup /sys/fs/cgroup/unified (or ss -a cgroup .)
ss -a cgroup /sys/fs/cgroup/unified/cgroup1 (or ss -a cgroup cgroup1)
v2:
- style fixes (David Ahern)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_FLOWER_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev erspan1 ingress
# tc filter add dev erspan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
erspan_opts 1:2:0:0/1:255:0:0 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev erspan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
erspan_opts 1:2:0:0/1:255:0:0
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 1 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_FLOWER_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev vxlan1 ingress
# tc filter add dev vxlan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
vxlan_opts 65793/4008635966 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev vxlan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
vxlan_opts 65793/4008635966
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 3 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- get_u32 with base = 0 for gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
erspan_opts 1:2:0:0 \
action mirred egress redirect dev erspan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49151 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
erspan_opts 1:2:0:0
csum pipe
index 2 ref 1 bind 1
...
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
