Since kernel commit 8dce43919566 ("xfrm: interface with if_id 0 should return error")
if_id should be non zero.
Delete the test without if_id, which defaulted if_id to zero.
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When the dsfield option was added to ip rule, it only worked for add
and delete operations. For consistency, allow it when dumping rules
too.
Fixes: dec01609dc ("iproute2: Add dsfield as alias for tos for ip rules")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Following commit 8323b20f1d76 ("net/sched: act_vlan: No dump for unset
priority"), the kernel no longer dump vlan priority if not explicitly
set before.
When modifying a vlan, tc/vlan.t test expects to find priority set to 0
without setting it explicitly. Thus, after 8323b20f1d76 this test fails.
Fix this simply removing the check on priority.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Match all MPLS fields using smallest and highest possible values.
Test the two ways of specifying MPLS header matching:
* with the basic mpls_{label,tc,bos,ttl} keywords (match only on the
first LSE),
* with the more generic "lse" keyword (allows matching at different
depth of the MPLS label stack).
This test file allows to find problems like the one fixed by
Linux commit 7fdd375e3830 ("net: sched: Fix dump of MPLS_OPT_LSE_LABEL
attribute in cls_flower").
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_MPLS_ACT_MAC_PUSH action (kernel commit
a45294af9e96 ("net/sched: act_mpls: Add action to push MPLS LSE before
Ethernet header")). This action let TC push an MPLS header before the
MAC header of a frame.
Example (encapsulate all outgoing frames with label 20, then add an
outer Ethernet header):
# tc filter add dev ethX matchall \
action mpls mac_push label 20 ttl 64 \
action vlan push_eth dst_mac 0a:00:00:00:00:02 \
src_mac 0a:00:00:00:00:01
This patch also adds an alias for ETH_P_TEB, since it is useful when
decapsulating MPLS packets that contain an Ethernet frame.
With MAC_PUSH, there's no previous Ethertype to modify. However, the
"protocol" option is still needed, because the kernel uses it to set
skb->protocol. So rename can_modify_ethtype() to can_set_ethtype().
Also add a test suite for m_mpls, which covers the new action and the
pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH
actions (kernel commit 19fbcb36a39e ("net/sched: act_vlan:
Add {POP,PUSH}_ETH actions"). These action let TC remove or add the
Ethernet at the head of a frame.
Drop an Ethernet header:
# tc filter add dev ethX matchall action vlan pop_eth
Push an Ethernet header (the original frame must have no MAC header):
# tc filter add dev ethX matchall action vlan \
push_eth dst_mac 0a:00:00:00:00:02 src_mac 0a:00:00:00:00:01
Also add a test suite for m_vlan, which covers these new actions and
the pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Test the plain MPLS (unicast and multicast) and IP (v4 and v6) modes.
Also test the multiproto option for MPLS and for IP.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Consider this configuration:
ip link add br0 type bridge
ip link add vx0 type vxlan dstport 4789 external
ip link set dev vx0 master br0
bridge vlan del vid 1 dev vx0
ip link add vx1 type vxlan dstport 4790 external
ip link set dev vx1 master br0
root@vsid:/src/iproute2# ./bridge/bridge vlan
port vlan-id
br0 1 PVID Egress Untagged
vx0 None
vx1 1 PVID Egress Untagged
root@vsid:/src/iproute2#
Note the useless and inconsistent empty lines.
root@vsid:/src/iproute2# ./bridge/bridge vlan tunnelshow
port vlan-id tunnel-id
br0
vx0 None
vx1
What's the difference between "None" and ""?
root@vsid:/src/iproute2# ./bridge/bridge -j -p vlan tunnelshow
[ {
"ifname": "br0",
"tunnels": [ ]
},{
"ifname": "vx1",
"tunnels": [ ]
} ]
Why does vx0 appear in normal output and not json output?
Why output an empty list for br0 and vx1?
Fix these inconsistencies and avoid outputting entries with no values. This
makes the behavior consistent with other iproute2 commands, for example
`ip -6 addr`: if an interface doesn't have any ipv6 addresses, it is not
part of the listing.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This fixes broken tests in commit c4f5862994 ("ss: use compact output
for undetected screen width")
It also escapes stars as grep is used and more bugs could sneak under
the radar with the previous solution.
Signed-off-by: Peter Junos <petoju@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
repeats for "vlan tunnelshow" what commit 0f36267485 ("bridge: fix vlan
show formatting") did for "vlan show". This fixes problems in json output.
Note that the resulting json output format of "vlan tunnelshow" is not the
same as the original, introduced in commit 8652eeb3ab ("bridge: vlan:
support for per vlan tunnel info"). Changes similar to the ones done for
"vlan show" in commit 0f36267485 ("bridge: fix vlan show formatting") are
carried over to "vlan tunnelshow".
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Fixes: 0f36267485 ("bridge: fix vlan show formatting")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_vlan() and print_vlan_tunnel() are almost identical copies, save for
a missing newline in the latter which leads to broken output of "vlan
tunnelshow" in normal mode.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit c7c1a1ef51 ("bridge: colorize output and use JSON print
library"), print_range() is used for vid (16bits) and vni. However, the
latter are 32bits so they get truncated. They got truncated even before
that commit though.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
a substring match is not enough, ex: 10 != 1
Fixes: 30383b074d ("tests: Add output testing")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
make provides a handy -C option to change directory before reading
the makefiles or doing anything else.
Use that instead of the "cd dir && make && cd .." pattern, thus
simplifying sintax for some makefiles.
Changes from v1:
- Drop an obviously wrong leftover on testsuite/iproute2/Makefile
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Compile of tools directory fails with:
make -C tools
CC generate_nlmsg
../../lib/libnetlink.c:28:27: fatal error: linux/nexthop.h: No such file or directory
#include <linux/nexthop.h>
^
compilation terminated.
Add local uapi to build path.
Fixes: 74829ca7dd ("libnetlink: Add helper to create nexthop dump request")
Signed-off-by: David Ahern <dsahern@gmail.com>
make provides a handy -C option to change directory before reading
the makefiles or doing anything else.
Use that instead of the "cd dir && make && cd .." pattern, thus
simplifying sintax for some makefiles.
Changes from v1:
- Drop an obviously wrong leftover in testsuite/iproute2/Makefile
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Interfaces take a 'if_id' which is an interface id which can be set on
an xfrm policy as its interface lookup key (XFRMA_IF_ID).
Signed-off-by: Matt Ellison <matt@arroyo.io>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
bash and dash require for escape sequence to use 'echo -e' or printf
(but working on zsh). Choosing printf as it's implementation is IMHO
more portable than echo implementations.
dash also require to use \033[0; as escape sequence instead of \e[0;
NOTE: \e[0; kept in lib/color.c as it's not problematic for C code
(working when run ip on various shells).
Fixes: 7e2f71b4 ("testsuite: colorize test result output")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The classifier testbed test never worked and was always being
skipped. It depended on some files it tests/cls which never made
it into the iproute2 git repository.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Bashisms for tests were removed in ecd44e68 ("tests: Remove
bashisms (s/source/.)"), so no need to use bash shebang.
+ remove trailing whitespace.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The tunnel test leaves behind link devices created by the GRE kernel
modules:
$ ip -br link
...
gre0@NONE DOWN 0.0.0.0 <NOARP>
gretap0@NONE DOWN 00:00:00:00:00:00 <BROADCAST,MULTICAST>
erspan0@NONE DOWN 00:00:00:00:00:00 <BROADCAST,MULTICAST>
ip6tnl0@NONE DOWN :: <NOARP>
ip6gre0@NONE DOWN 00:00:00:00:
$ lsmod | grep gre
ip6_gre 40960 0
ip6_tunnel 40960 1 ip6_gre
ip_gre 32768 0
ip_tunnel 24576 1 ip_gre
gre 16384 2 ip6_gre,ip_gre
Check beforehand if the gre kernel module is loaded, and if not unload
them all at the end of the test. This should avoid causing problems if
a user is already using GRE for other purposes.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Parallel make from the top level directory fails since tests are at the
same time as generate_nlmsg:
$ make check -j4
...
cd testsuite && make && make alltests
echo "Entering iproute2" && cd iproute2 && make configure && cd ..;
Entering iproute2
make -C tools
Removing results dir ...
make[1]: ./tools/generate_nlmsg: Command not found
make[1]: ./tools/generate_nlmsg: Command not found
Makefile:64: recipe for target 'ip/netns/set_nsid_batch.t' failed
make[1]: *** [ip/netns/set_nsid_batch.t] Error 127
make[1]: ./tools/generate_nlmsg: Command not found
make[1]: *** Waiting for unfinished jobs....
Makefile:64: recipe for target 'ip/netns/set_nsid.t' failed
make[1]: *** [ip/netns/set_nsid.t] Error 127
Makefile:64: recipe for target 'ip/link/show_dev_wo_vf_rate.t' failed
make[1]: *** [ip/link/show_dev_wo_vf_rate.t] Error 127
CC generate_nlmsg
Makefile:123: recipe for target 'check' failed
make: *** [check] Error 2
Add an explicit dependency in testuite/Makefile's $(TESTS) rule so
that the tool correctly gets compiled before any test runs.
Fixes: 3537633dcf ("testsuite: Generate generate_nlmsg when needed")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Test that when a second or following command in a batch fails, tc
reports it correctly. This is a test for the previous patch.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When running testsuite it is easy as a human to miss failure.
Add symbol colorizing to SKIPED/PASS/FAIL output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit 00240899ec ("ss: Actually print left delimiter for
columns") changes spacing in ss output, we also need to adjust for that in
the ss filter test.
Fixes: 00240899ec ("ss: Actually print left delimiter for columns")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It's $(QUIET_CC)$(CC) not $(QUIET_CC), copy-paste error. CI does
verbose build so it slipped through.
Fixes: 6e7d347aab ("testsuite: build generate_nlmsg with QUIET_CC")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Follow the standard pattern, and respect user's verbosity setting.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
alltests target requires having symlink created by configure target
(default target). Without that there is no test being run.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit 886f2c43 added generate_nlmsg.c. Running alltests
target, which uses the binary required to run 'make -C tools' before.
Fixes: 886f2c43 testsuite: Generate nlmsg blob at runtime
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit ad23e152 caused generate_nlmsg to be always missing:
$ make alltests
make: ./tools/generate_nlmsg: Command not found
Create testclean: to remove only results directory.
Fixes: ad23e152 testsuite: remove all temp files and implement make clean
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some distributions like Debian nowadays restrict the dmesg command to
root-only. Run it with sudo in the testsuite.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The generate_nlmsg binary is required but make -C testsuite compile
does not build it. Add the necessary includes and C*FLAGS to the tools
Makefile and have the compile target build it.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some generated test files were not removed, including one executable in
the testsuite/tools directory.
Ensure make clean from the top level directory works for the testsuite
subdirs too, and that all the files are removed.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Once there are more than a certain number of kernel config options
set (this happened for us with kernel 4.17), the method of passing
those as command line arguments exceeds the maximum number of
arguments the shell supports. This causes the whole testsuite to
fail.
Instead, create a temporary file and modify its contents so that
the config option variables are exported. Then this file can be
sourced in before running the tests.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This tests a few ssfilter expressions by selecting sockets from a TCP
dump file. The dump was created using the following command:
| ss -ntaD testsuite/tests/ss/ss1.dump
It is fed into ss via TCPDIAG_FILE environment variable.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This merges the shared bits from ts_tc() and ts_ip() into a common
function for being wrapped by the first ones and adds a third ts_ss()
for testing ss commands.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The change to limit the read size from /dev/urandom is a tradeoff.
Reading too much can trigger an issue, but so it could if the
suggested 250 random chars would not contain enough [:alpha:] chars.
If they contain:
a) >=6 all is ok
b) [1-5] the devname would be shorter than expected (non fatal).
c) 0 things would break
In loops of hundreds of thousands it always was (a) for my, but since
if occuring in a test it might be hard to track what happened avoid
this issue by retrying on the length condition.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In some test environments like e.g. Ubuntu & Debian autopkgtest it
can happen that while generating random device names the pipes
between tr and head are considered dead while processing.
That prints (non fatal) issues like:
Running ip/link/new_link.t [iproute2-this/4.13.0-17-generic]: tr:
write error: Broken pipe
tr: write error
PASS
This only happens if reading an infinite amount of chars with the
read from urandom, so reading a defined amount fixes the issue.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
