Allow to set tos and ttl for the tunnel.
For example, here's encap rule that sets tos to the tunnel:
tc filter add dev eth0_0 protocol ip parent ffff: prio 10 flower \
src_mac e4:11:22:33:44:50 dst_mac e4:11:22:33:44:70 \
action tunnel_key set src_ip 192.168.10.1 dst_ip 192.168.10.2 id 100 dst_port 4789 tos 0x30 \
action mirred egress redirect dev vxlan_sys_4789
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is consistent with the other multi-word parameters. Also change the
JSON output to be consistent with way it is formatted for the other
options.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Here we are partially reverting commit c14f9d92ee
"treewide: Use addattr_nest()/addattr_nest_end() to handle nested
attributes" .
As discussed in [1], changing from the 'manually' coded version that
used addattr_l() to addattr_nest_compat() wasn't functionally
equivalent, because now the messages have extra fields appended to it.
This introduced a regression since the implementation of parse_attr()
from both mqprio and netem can't handle this new message format.
Without this fix, mqprio returns an error. netem won't return an error
but its internal configuration ends up wrong.
As an example, this can be reproduced by the following commands when
this patch is not applied:
1) mqprio
$ tc qdisc replace dev enp3s0 parent root handle 100 mqprio \
num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 hw 0
RTNETLINK answers: Numerical result out of range
2) netem
$ tc qdisc add dev enp3s0 root netem rate 5kbit 20 100 5 \
distribution normal latency 1 1
$ tc -s qdisc
(...)
qdisc netem 8001: dev enp3s0 root refcnt 9 limit 1000 delay 0us 0us
Sent 402 bytes 1 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
(...)
With this patch applied, the tc -s qdisc command above for netem instead
reads:
(...)
qdisc netem 8002: dev enp3s0 root refcnt 9 limit 1000 delay 0us 0us \
rate 5Kbit packetoverhead 20 cellsize 100 celloverhead 5
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
(...)
[1] https://patchwork.ozlabs.org/patch/867860/#1893405
Fixes: c14f9d92ee ("treewide: Use addattr_nest()/addattr_nest_end() to handle nested attributes")
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sch_cake is intended to squeeze the most bandwidth and latency out of even
the slowest ISP links and routers, while presenting an API simple enough
that even an ISP can configure it.
Example of use on a cable ISP uplink:
tc qdisc add dev eth0 cake bandwidth 20Mbit nat docsis ack-filter
To shape a cable download link (ifb and tc-mirred setup elided)
tc qdisc add dev ifb0 cake bandwidth 200mbit nat docsis ingress wash besteffort
Cake is filled with:
* A hybrid Codel/Blue AQM algorithm, "Cobalt", tied to an FQ_Codel
derived Flow Queuing system, which autoconfigures based on the bandwidth.
* A novel "triple-isolate" mode (the default) which balances per-host
and per-flow FQ even through NAT.
* An deficit based shaper, that can also be used in an unlimited mode.
* 8 way set associative hashing to reduce flow collisions to a minimum.
* A reasonable interpretation of various diffserv latency/loss tradeoffs.
* Support for zeroing diffserv markings for entering and exiting traffic.
* Support for interacting well with Docsis 3.0 shaper framing.
* Support for DSL framing types and shapers.
* Support for ack filtering.
* Extensive statistics for measuring, loss, ecn markings, latency variation.
Various versions baking have been available as an out of tree build for
kernel versions going back to 3.10, as the embedded router world has been
running a few years behind mainline Linux. A stable version has been
generally available on lede-17.01 and later.
sch_cake replaces a combination of iptables, tc filter, htb and fq_codel
in the sqm-scripts, with sane defaults and vastly simpler configuration.
Cake's principal author is Jonathan Morton, with contributions from
Kevin Darbyshire-Bryant, Toke Høiland-Jørgensen, Sebastian Moeller,
Ryan Mounce, Tony Ambardar, Dean Scarff, Nils Andreas Svee, Dave Täht,
and Loganaden Velvindron.
Testing from Pete Heist, Georgios Amanakis, and the many other members of
the cake@lists.bufferbloat.net mailing list.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
The new action inheritdsfield copies the field DS of
IPv4 and IPv6 packets into skb->priority. This enables
later classification of packets based on the DS field.
v4:
* Make tc use netlink helper functions
v3:
* Make flag represented in JSON output as a null value
v2:
* Align the output syntax with the input syntax
* Fix the style issues
Original idea by Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Qiaobin Fu <qiaobinf@bu.edu>
Reviewed-by: Michel Machado <michel@digirati.com.br>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The "Earliest TxTime First" (ETF) queueing discipline allows precise
control of the transmission time of packets by providing a sorted
time-based scheduling of packets.
The syntax is:
tc qdisc add dev DEV parent NODE etf delta <DELTA>
clockid <CLOCKID> [offload] [deadline_mode]
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conversion to print stats in JSON forgot to remove existing
fprintf.
Fixes: 4fcec7f366 ("tc: jsonify stats2")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A commandline like 'tc -d class show dev dev-name' does not
display value of prio and quantum option when we use htb qdisc.
This patch fixes the bug.
Signed-off-by: Fumihiko Kakuma <kakuma@valinux.co.jp>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Example output is of tos and ttl.
Befoe this fix the format used %x caused output of the pointer
instead of the intended string created in the out variable.
Fixes: e28b88a464 ("tc: jsonify flower filter")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow setting tunnel options using the act_tunnel_key action.
Options are expressed as class:type:data and multiple options
may be listed using a comma delimiter.
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
geneve_opts 0102:80:00800022,0102:80:00800022 \
action mirred egress redirect dev geneve0
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When sending accumulated compound command results an error, check 'force'
option before exiting. Move return code check after putting batch bufs and
freeing iovs to prevent memory leak. Break from loop, instead of returning
error code to allow cleanup at the end of batch function. Don't reset ret
code on each iteration.
Fixes: 485d0c6001 ("tc: Add batchsize feature for filter and actions")
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In order to make TDC tests match the output patterns, the missing space
character must be added in the mode output string.
Fixes: 8744c5d338 ("tc: jsonify ife action")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently there is no way to log offloading errors if the rule is not
explicitly marked as skip_sw, making it hard for other applications such
as Open vSwitch to log why a given could not be offloaded.
This patch adds support for signaling the kernel that more verbose
logging is wanted, which now will include such messages.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The dash printed by the ingress qdisc breaks JSON output, so only print it
in regular output mode.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit 9fd3f0b255 ("tc: enable json output for actions") added JSON
support for tc-actions at the expense of breaking other use cases that
reach tc_print_action(), as the latter don't expect the 'actions' array
to be a new object.
Consider the following taken duringrun of tc_chain.sh selftest,
and see the latter command output is broken:
$ ./tc/tc -j -p actions list action gact | grep -C 3 actions
[ {
"total acts": 1
},{
"actions": [ {
"order": 0,
$ ./tc/tc -p -j -s filter show dev enp3s0np2 ingress | grep -C 3 actions
},
"skip_hw": true,
"not_in_hw": true,{
"actions": [ {
"order": 1,
"kind": "gact",
"control_action": {
Relocate the open/close of the JSON object to declare the object only
for the case that needs it.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Tested-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add initial support for oneline mode in tc; actions, filters and qdiscs
will be gradually updated in the follow-up patches.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The compat_rev field does not exists in old versions of iptables.
e.g. iptables 1.4.
Fixes: dd29621578 ("tc: add em_ipt ematch for calling xtables matches from tc matching context")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Enable proper JSON output support for fq_codel in `tc -s qdisc` output.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add missing documentation of the memory_limit fq_codel parameter and the
ce_threshold codel and fq_codel parameters.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
If the user didn't specify any control action, don't pop the command line
arguments: otherwise, parsing of the next argument (tipically the 'index'
keyword) results in an error, causing the following 'tc-testing' failures:
Test a6d6: Add skbedit action with index
Test 38f3: Delete skbedit action
Test a568: Add action with ife type
Test b983: Add action without ife type
Test 7d50: Add skbmod action to set destination mac
Test 9b29: Add skbmod action to set source mac
Test e93a: Delete an skbmod action
Also, add missing parse for 'ok' control action to m_police, to fix the
following 'tc-testing' failure:
Test 8dd5: Add police action with control ok
tested with:
# ./tdc.py
test results:
all tests ok using kernel 4.16-rc2, except 9aa8 "Get a single skbmod
action from a list" (which is failing also before this commit)
Fixes: 3572e01a09 ("tc: util: Don't call NEXT_ARG_FWD() in __parse_action_control()")
Cc: Michal Privoznik <mprivozn@redhat.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The commit calls a new tc ematch for using netfilter xtable matches.
This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.
Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).
The matcher uses libxtables for parsing the input parameters.
Example use for matching an IPSec state with reqid 1:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
basic match 'ipt(-m policy --dir in --pol ipsec --reqid 1)' \
action drop
This is the user-space counter part of kernel commit ccc007e4a746
("net: sched: add em_ipt ematch for calling xtables matches")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
ematche uses YACC to parse ematch arguments and places them in struct bstr
linked lists.
It is useful to be able to receive parameters as argc,argv in order to use
getopt (and alike) argument parsers.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The tc_print_action() function did not print all tc actions
when e.g. TCA_ACT_MAX_PRIO actions were defined for a single
tc filter.
Signed-off-by: Adam Vyskovsky <adamvyskovsky@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement the -color option; in this case -co is ambiguous
since it was already used for -conf.
For now this just means putting device name in color.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit a233caa0aa ("json: make pretty printing optional") I get
following build failure:
LINK rtmon
../lib/libutil.a(json_print.o): In function `new_json_obj':
json_print.c:(.text+0x35): undefined reference to `show_pretty'
collect2: error: ld returned 1 exit status
make[1]: *** [rtmon] Error 1
make: *** [all] Error 2
It is caused by missing show_pretty variable in rtmon.
On the other hand tc/tc.c there are two distinct variables and single
matches() call that handles -pretty option thus setting show_pretty
will never happen. Note that since commit 44dcfe8201 ("Change
formatting of u32 back to default") show_pretty is used in tc/f_u32.c
so this is first place where -pretty introduced.
Furthermore other utilities like misc/ifstat.c and misc/nstat.c define
pretty variable, however only for their own purposes. They both support
JSON output and thus depend show_pretty in new_json_obj().
Assuming above use common variable to represent -pretty option, define
it in utils.c and declare in utils.h that is commonly used. Replace
show_pretty with pretty.
Fixes: a233caa0aa ("json: make pretty printing optional")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since JSON is intended for programmatic consumption, it makes
sense for the default output format to be concise as possible.
For programmer and other uses, it is helpful to keep the pretty
whitespace format; therefore enable it with -p flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
We have helper routines to support nested attribute addition into
netlink buffer: use them instead of open coding.
Use addattr_nest_compat()/addattr_nest_compat_end() where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Non-JSON tc qdisc output used to print the "requeues" statistic
twice. Commit 4fcec7f366 ("tc: jsonify stats2") tried to preserve
this behaviour for both standard output and JSON, but used the wrong
statistic (q.qlen). Also duplicating keys in JSON is not allowed,
so the second occurrence should be completely skipped with JSON.
Fixes: 4fcec7f366 ("tc: jsonify stats2")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make JSON output work with prio Qdiscs. This will also make
other qdiscs which reuse the print_qopt work, like mqprio or
pfifo_fast.
Note that there is a double space between "priomap" and first
prio number. Keep this original behaviour.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make JSON output work with RED Qdiscs. Float/double printing
helpers have to be added/uncommented to print the probability.
Since TC stats in general are not split out to a separate object
the xstats printed by this patch are not separated either.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The lexer will go with the longest match, so previously
the starting double quotes of a string would be swallowed by
the [^ \t\r\n()]+ pattern leaving the user no way to
actually use strings with escape sequences.
Fix this by not allowing this case to start with double
quotes.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
During qdisc creation it is possible to specify shared block for bot
ingress and egress. Pass this values to kernel according to the command
line options.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
So far, qdisc was the only handle that could be used to manipulate
filters. Kernel added support for using block to manipulate it. So add
the support to use block index to manipulate filters. The magic
TCM_IFINDEX_MAGIC_BLOCK indicates the block index is in use.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This hepler used qdisc dump to list all qdisc and find if block index in
question is used by any of them. That means the block with specified
index exists.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Setting th_min and th_max to the same value may be useful for DCTCP
deployments. The original DCTCP paper describes it as a simplest way
of achieving simple ECN threshold marking. Indeed, there doesn't seem
to be any simpler qdisc in Linux which would allow such a setup today.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When adding a filter with a gact action such as 'drop', tc first tries
to open a shared object with equivalent name (m_drop.so in this case)
before trying gact. Avoid this by matching the action name against those
handled by gact prior to calling get_action_kind().
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Currently in tc batch mode, only one command is read from the batch
file and sent to kernel to process. With this support, at most 128
commands can be accumulated before sending to kernel.
Now it only works for the following successive commands:
1. filter add/delete/change/replace
2. actions add/change/replace
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This document described how kernel and tc used to handle
timing. In last two years, kernel has switched over to using
ktime. Nothing to see here, move along.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use the newly added TCA_HW_OFFLOAD indication from kernel
to print a consistent 'offloaded' message to user when listing qdiscs.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If command is RTM_DELACTION, a non-NULL pointer is passed to rtnl_talk().
Then flag NLM_F_ACK is not set on n->nlmsg_flags and netlink_ack() will
not be called. Command tc will wait for the reply for ever.
Fixes: 86bf43c7c2 ("lib/libnetlink: update rtnl_talk to support malloc buff at run time")
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Not all callers want parse_action_control*() to advance the
arguments. For instance act_parse_police() does the argument
advancing itself.
Fixes: e67aba5595 ("tc: actions: add helpers to parse and print control actions")
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make the output same as input and avoid printout of unnecessary len.
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: fd8b3d2c1b ("actions: Add support for user cookies")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Cookie print was made dependent on show_stats for no good reason. Fix
this bu pushing cookie print ot of the stats if.
Fixes: fd8b3d2c1b ("actions: Add support for user cookies")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Split parsing and loading of the eBPF program and if skip_sw is set
load the program for ifindex, to which the qdisc is attached.
Note that the ifindex will be ignored for programs which are already
loaded (e.g. when using pinned programs), but in that case we just
trust the user knows what he's doing. Hopefully we will get extack
soon in the driver to help debugging this case.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Move resolving device name into an ifindex before calling filter
specific callbacks. This way if filters need the ifindex, they
can read it from the request.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Both BPF filter and action will allow users to specify run
multiple times, and only the last one will be considered by
the kernel. Explicitly refuse such command lines.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_parse_common() parses and loads the program. Rename it
accordingly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Program type is needed both for parsing and loading of
the program. Parsing may also induce the type based on
signatures from __bpf_prog_meta. Instead of passing
the type around keep it in struct bpf_cfg_in.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adapts the tc command line interface to allow bandwidth limits
to be specified as a percentage of the interface's capacity.
Adding this functionality requires passing the specified device string to
each class/qdisc which changes the prototype for a couple of functions: the
.parse_qopt and .parse_copt interfaces. The device string is a required
parameter for tc-qdisc and tc-class, and when not specified, the kernel
returns ENODEV. In this patch, if the user tries to specify a bandwidth
percentage without naming the device, we return an error from userspace.
Signed-off-by: Nishanth Devarajan<ndev2021@gmail.com>
For places where tc is expecting device name use IFNAMSIZ.
For others where it is a filter name, introduce a new constant.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
GCC version 7.2.1 complains that 'result1' may be used uninitialized in
parse_action_control_slash_spaces(). This should not be possible in
practice, so the actual value 'result1' is initialized with does not
matter.
Signed-off-by: Phil Sutter <phil@nwl.cc>
