This patch implements support for the IFLA_BR_FDB_FLUSH attribute
in iproute2 so it can flush bridge fdb dynamic entries.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
This patch adds a new field that is printed in the end of the line which
denotes the real entry state. Before this patch an entry's IIF could
disappear and it would look like an unresolved one (iif = unresolved):
(3.0.16.1, 225.11.16.1) Iif: unresolved
with no way to really distinguish it from an unresolved entry.
After the patch if the dumped entry has RTNH_F_UNRESOLVED set we get:
(3.0.16.1, 225.11.16.1) Iif: unresolved State: unresolved
for unresolved entries and:
(0.0.0.0, 225.11.11.11) Iif: eth4 Oifs: eth3 State: resolved
for resolved entries after the OIF list. Note that "State:" has ':' in
it so it cannot be mistaken for an interface name.
And for the example above, we'd get:
(0.0.0.0, 225.11.11.11) Iif: unresolved State: resolved
Also when dumping all routes via ip route show table all,
it will show up as:
multicast 225.11.16.1/32 from 3.0.16.1/32 table default proto 17 unresolved
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To specify multiple nexthops in a route the user is expected to use the
"nexthop" keyword which ip route uses to create the RTA_MULTIPATH.
However, ip route always accepts multiple 'via' keywords where only the
last one is used in the route leading to confusion. For example, ip
accepts this syntax:
$ ip ro add vrf red 1.1.1.0/24 via 10.100.1.18 via 10.100.2.18
but the route entered inserted by the kernel is just the last gateway:
1.1.1.0/24 via 10.100.2.18 dev eth2
which is not the full request from the user. Detect the presense of
multiple 'via' and give the user a hint to add nexthop:
$ ip ro add vrf red 1.1.1.0/24 via 10.100.1.18 via 10.100.2.18
Error: argument "via" is wrong: use nexthop syntax to specify multiple via
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
addattr16 may return an error about the nl msg size
but not about incorrect eth type.
Fixes: 488b41d020 ("tc: flower no need to specify the ethertype")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
addattr32 may return an error.
Fixes: cfcabf18d8 ("tc: flower: Add skip_{hw|sw} support")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Fix "Policy buffer overflow" when trying to use deleteall with many
policies installed.
Signed-off-by: Alexander Heinlein <alexander.heinlein@secunet.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This fix a missing use case after the introduction of enum flower_endpoint.
Fixes: 6910d65661 ("tc: flower: introduce enum flower_endpoint")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Entries with long vhost names in /proc/net/igmp have no whitespace
between name and colon, so sscanf() adds it to vhost and
'ip maddr show iface' doesn't include inet result.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
In order to ensure no backward/forward compatiablity problems,
make sure that all kernel headers used come from the local copy.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Correct typo in example in ife man page.
Fixes: 06f9a59170 ("man: tc-ife.8: man page for ife action")
Cc: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This patch adds a new argument to the bridge fdb show command that allows
to filter by entry state.
Also update the man page to include all available show arguments.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Frank reported that table ids for very large numbers are not properly
detected:
$ ip li add foobar type vrf table 98765432100123456789
command succeeds and resulting table id is actually:
21: foobar: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether da:ea:d4:77:38:2a brd ff:ff:ff:ff:ff:ff promiscuity 0
vrf table 4294967295 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Make the temp variable 'i' unsigned long and let the typecast to u32
happen on assignment to id.
Reported-by: Frank Kellermann <frank.kellermann@atos.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Show ipv6 tunnel keys on presence of GRE_KEY flag for tunnel types
other than GRE. Aligns ipv6 behaviour with ipv4.
Signed-off-by: dforster@brocade.com
Said iptables version introduced struct xtables_globals field
'compat_rev', a function pointer. Initializing it is mandatory as
libxtables calls it without existence check.
Without this, tc segfaults when using the xt action like so:
| tc filter add dev d0 parent ffff: u32 match u32 0 0 \
| action xt -j MARK --set-mark 20
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add support for reading proto id/name mappings from rt_protos.d
directory. Allows users to have custom protocol values converted
to human friendly names.
Each file under rt_protos.d has the 'id name' format used by
rt_protos. Only .conf files are read and parsed.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Next up a non-root user gets various bpf related error messages:
$ ip vrf exec mgmt bash
Failed to load BPF prog: 'Operation not permitted'
Kernel compiled with CGROUP_BPF enabled?
Catch the EPERM error and do not show the kernel config option.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently, if a non-root user attempts to run ip vrf exec a non-helpful
error is returned:
$ ip vrf exec mgmt bash
Failed to mount cgroup2. Are CGROUPS enabled in your kernel?
Only show the CGROUPS kernel hint for the ENODEV error and for the
rest show the strerror for the errno. So now:
$ ip/ip vrf exec mgmt bash
Failed to mount cgroup2: Operation not permitted
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Andy reported a missing newline if a non-root user attempts to run
'ip vrf exec':
$ ./ip/ip vrf exec default /bin/echo asdf
mkdir failed for /var/run/cgroup2: Permission deniedFailed to setup vrf cgroup2 directory
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Since 41aa17ff46 ("tc/cls_flower: Add dest UDP port to tunnel params")
tc flower supports setting the dest UDP port.
* Use "port_number" to be consistent with other man-page text
* Re-add "enc_dst_port" documentation to manpage which was
accidently removed by b2a1f740aa ("tc: flower: document that *_ip
parameters take a PREFIX as an argument.")
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Enhance flower to support matching on flags.
The 1st flag allows to match on whether the packet is
an IP fragment.
Example:
# add a flower filter that will drop fragmented packets
# (bit 0 of control flags)
tc filter add dev ens4f0 protocol ip parent ffff: \
flower \
src_mac e4:1d:2d:fd:8b:01 \
dst_mac e4:1d:2d:fd:8b:02 \
indev ens4f0 \
matching_flags 0x1/0x1 \
action drop
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
This fixes under musl build issues like:
f_matchall.c: In function ‘matchall_parse_opt’:
f_matchall.c:48:12: error: ‘LONG_MIN’ undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
f_matchall.c:48:12: note: each undeclared identifier is reported only once for each function it appears in
f_matchall.c:48:29: error: ‘LONG_MAX’ undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
tunnel key set parameters includes also dest UDP port, add it to the
usage.
Fixes: 449c709c38 ("tc/m_tunnel_key: Add dest UDP port to tunnel key action")
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reported-by: Simon Horman <simon.horman@netronome.com>
Encapsulation dest UDP port is part of the classifier matching
parameters, add it to the usage.
Fixes: 41aa17ff46 ("tc/cls_flower: Add dest UDP port to tunnel params")
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reported-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_mac and dst_mac may now take an optional mask
to limit the scope of matching.
* This address is is documented as a LLADDR in keeping with ip-link(8).
* The formats accepted match those already output when dumping flower
filters from the kernel.
Example of use of LLADDR with and without a mask:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:01:00:00:00/ff:ff:00:00:00:01 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00/23 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_ip, dst_ip, enc_src_ip and enc_dst_ip take an
optional prefix length which is used to provide a mask to limit the scope
of matching.
* This is documented as a PREFIX in keeping with ip-route(8).
Example of uses of IPv4 and IPv6 prefixes
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 dst_ip 192.168.1.1 action drop
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 src_ip 10.0.0.0/8 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 src_ip 2001:DB8:1::/48 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 dst_ip 2001:DB8::1 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_mac and dst_mac may now take an optional mask
to limit the scope of matching.
* This address is is documented as a LLADDR in keeping with ip-link(8).
* The formats accepted match those already output when dumping flower
filters from the kernel.
Example of use of LLADDR with and without a mask:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:01:00:00:00/ff:ff:00:00:00:01 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00/23 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_ip, dst_ip, enc_src_ip and enc_dst_ip take an
optional prefix length which is used to provide a mask to limit the scope
of matching.
* This is documented as a PREFIX in keeping with ip-route(8).
Example of uses of IPv4 and IPv6 prefixes
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 dst_ip 192.168.1.1 action drop
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 src_ip 10.0.0.0/8 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 src_ip 2001:DB8:1::/48 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 dst_ip 2001:DB8::1 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
