In several places (code reuse?), the variable handle
is a parameter to the function, but then
is defined inside basic block for classid.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
ip/ip:
add/remove: 0/0 grow/shrink: 5/15 up/down: 103/-4796 (-4693)
Total: Before=672591, After=667898, chg -0.70%
ip/rtmon:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-54 (-54)
Total: Before=48879, After=48825, chg -0.11%
tc/tc:
add/remove: 0/2 grow/shrink: 31/10 up/down: 882/-6133 (-5251)
Total: Before=351912, After=346661, chg -1.49%
bridge/bridge:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-459 (-459)
Total: Before=70502, After=70043, chg -0.65%
misc/lnstat:
add/remove: 0/1 grow/shrink: 1/0 up/down: 48/-486 (-438)
Total: Before=9960, After=9522, chg -4.40%
tipc/tipc:
add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-62 (-44)
Total: Before=79182, After=79138, chg -0.06%
While at it, indent some strings which were starting at column 0,
and use tabs where possible, to have a consistent style across helps.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Martin Olsson <martin.olsson+netdev@sentorsecurity.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
dump more than TCA_ACT_MAX_PRIO actions per batch when the kernel
supports it.
Introduced keyword "since" for time based filtering of actions.
Some example (we have 400 actions bound to 400 filters); at
installation time. Using updated when tc setting the time of
interest to 120 seconds earlier (we see 400 actions):
prompt$ hackedtc actions ls action gact since 120000| grep index | wc -l
400
go get some coffee and wait for > 120 seconds and try again:
prompt$ hackedtc actions ls action gact since 120000 | grep index | wc -l
0
Lets see a filter bound to one of these actions:
....
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2 success 1)
match 7f000002/ffffffff at 12 (success 1 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1145 sec used 802 sec
Action statistics:
Sent 84 bytes 1 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
...
that coffee took long, no? It was good.
Now lets ping -c 1 127.0.0.2, then run the actions again:
prompt$ hackedtc actions ls action gact since 120 | grep index | wc -l
1
More details please:
prompt$ hackedtc -s actions ls action gact since 120000
action order 0: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1270 sec used 30 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
And the filter?
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 4 success 2)
match 7f000002/ffffffff at 12 (success 2 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1324 sec used 84 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Currently there is no way of querying whether a filter is
offloaded to HW or not when using "both" policy (where none
of skip_sw or skip_hw flags are set by user-space).
Add two new flags, "in hw" and "not in hw" such that user
space can determine if a filter is actually offloaded to
hw or not. The "in hw" UAPI semantics was chosen so it's
similar to the "skip hw" flag logic.
If none of these two flags are set, this signals running
over older kernel.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Print the skip flags when we dump a filter.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
The matchall classifier matches every packet and allows the user to apply
actions on it. In addition, it supports the skip_sw and skip_hw (as can
be found on u32 and flower filter) that direct the kernel to skip the
software/hardware processing of the actions.
This filter is very useful in usecases where every packet should be
matched. For example, packet mirroring (SPAN) can be setup very easily
using that filter.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
