Since f2fs support large sector size in commit 55cf9cb63f0e "f2fs: support large
sector size", block device with sector size of 512/1024/2048/4096 bytes can be
supported.
But mkfs.f2fs still use default sector size: 512 bytes as sector size, let's fix
this issue in this patch.
v2:
o remove unneeded printed message when sector size is large than 512 bytes
suggested by Kinglong.
o show correct sector size in printed message.
o use config.sectors_per_blk instead of DEFAULT_SECTORS_PER_BLOCK suggested by
Kinglong.
v3:
o remove another unneeded printed message when sector size is large than 512
bytes suggested by Kinglong.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to simplify coding style for readability.
Rename shortly
o rename super_block to sb
And, introduce some macros.
o set/get_cp
o set/get_sb
o next/prev_zone, last_zone and last_section
o ALIGN, SEG_ALIGN and ZONE_ALIGN
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch remains user specified triggering information in superblock.
Then, if the information was changed, fsck.f2fs is triggered.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
I might found a bug in mkfs.f2fs. while experimenting with f2fs on my big
endian MIPS32 device (platform lantiq, 14.07-rc3, uclibc).
I ran into an issue that mkfs.f2fs, was not able to format block devices if I
did not specify the sector count manually.
I hunted it down to lib/libf2fs.c.
After I found that the detected sector count equals to the wanted sector count
shifted left (32+9) times.
I found two issues:
Firstly it uses ioctl BLKGETSIZE, which writes to an uint32_t the size of the
device.
As c->total_sectors is of type uint64_t, the value is written in to the first
4 bytes.
That explained the left shift of 32 bits.
Secondly BLKGETSIZE determines the size of the device in bytes (AFAIK, learned
by observation).
In the first branch of the if-block patched below, the c->total_sectors is
calculated by
c->total_sectors = stat_buf.st_size / c->sector_size;
The else branch omits the devision. sector_sice is mostly 512, that explained
the left shift by 9 bytes.
* fixes sector count calculation
* uses BLKGETSIZE64 if avail
Signed-off-by: joerg jungermann <jj@borkum.net>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds supporting dump_file, which can extract a file from image.
You can simply select [yes|no] when doing dump.f2fs -i [inode number] [img].
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is required so that libf2fs.c can be used against any kind
of device (E.g. an in-memory sparse file) just by linking against
something that provides the libf2fs_io.c functions.
libf2fs is currently libf2fs.c + libf2fs_io.c
Signed-off-by: JP Abgrall <jpa@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch support large volume over about 3TB.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: add missing cp_payload in f2fs_super_block]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
* removed unused includes.
* removed unused parameters.
* Fixed a bunch of warnings around:
int i;
if (i < some_uint) ...
and
u32 x;
...
if (x < 0) return error;
* Protect BLKDISCARD usage if it is not available.
Change-Id: Iede035b1beb2df01c961589a69aff47a5258ecd2
Signed-off-by: JP Abgrall <jpa@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Support an fs_io dev_fill().
This helps with devices that actually already return 0 on uninitialized
data. It also helps with in memory devices using sparse libs: don't
allocate a block of 0s.
Signed-off-by: JP Abgrall <jpa@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This will allow turning mkfs into a libarary more easily.
Signed-off-by: JP Abgrall <jpa@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
flash devices support discard therefore discard is default but not set
in config
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In the case of lazy umount, "umount -l", some processes are able to use the
file system even if its mountpoint was disconnected.
At this moment, we should not allow mkfs.f2fs.
This patch adds this condition check.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
fsck.f2fs checks file system consistency, but does not repair a broken
file system yet.
dump.f2fs shows the information of a specific inode and makes dump file
of SSA and SIT.
f2fs checks file system consistency as follows:
o When data about used area and its metadata are identical,
f2fs is considered consistent. To verify such consistency, we use
three bitmaps: nat_area_bitmap, sit_area_bitmap, and main_area_bitmap.
First, each bit in nat_area_bitmap corresponds to a nid in NAT.
Second, each bit in sit_area_bitmap corresponds to a valid block in a
segment. This bitmap is same to the total valid_map of f2fs_sit_entries
in SIT.
Last, each bit in main_area_bitmap corresponds to a block in main area
except meta area.
After a consistency check of each block, we set or clear the
corresponding bit of each bitmap.
From the root node, we start consistency check. The verified
information varies according to block type.
1. NODE
- Read information of node block from NAT
- Check if block address is allocated using node info.
- Check if the type of f2fs_summary related to nid in SSA is NODE.
- Update the corresponding bit in nat_area_bitmap.
- Update the corresponding bit in sit_area_bitmap.
- Set the corresponding bit in main_area_bitmap to 1.
- Then, read node block. According to its attribute, explore
inode/direct node/indirect node/double indirect node
recursively.
- If it is an inode block, we also check its xattr and hard link.
2. DATA
- Check if the type of f2fs_summary related to nid in SSA is DATA.
- Set the corresponding bits of sit_area_bitmap and
main_area_bitmap to visited
- If it is a dentry block, traverse each dentries that may be
regular
file or directory. At this time, it will check inode block again.
Finally, we verify whether
- every nat_area_bitmap is visited
- any unreachable hard link exists
- values of sit_area_bitmap and main_area_bitmap are identical
- total_valid_block_count/node_count/inode_count are correct
Usage:
o fsck.f2fs
# fsck.f2fs /dev/sdx
options:
-d debug level [default:0]
o dump.f2fs
# dump.f2fs -i [ino] /dev/sdx
# dump.f2fs -s 0~-1 /dev/sdx (SIT dump)
# dump.f2fs -a 0~-1 /dev/sdx (SSA dump)
options:
-d debug level [default:0]
-i inode no (hex)
-s [SIT dump segno from #1~#2 (decimal), for all 0~-1]
-a [SSA dump segno from #1~#2 (decimal), for all 0~-1]
Note: To use dump.f2fs, please run make install or ln -s fsck.f2fs
dump.f2fs
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Byoung Geun Kim <bgbg.kim@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Mkfs copies labels up to 512 characters into a the 16 character buffer
config.vol_label corrupting memory afterwards and causing a core dump.
# mkfs.f2fs -l aaaaaaaaaabbbbbbbbbbcccccccccc /dev/sda12
F2FS-tools: mkfs.f2fs Ver: 1.1.0 (2013-03-08)
Info: Label = aaaaaaaaaabbbbbbbbbbcccccccccc
Info: sector size = 512
Info: total sectors = 2097152 (in 512bytes)
Info: zone aligned segment0 blkaddr: 256
Segmentation fault (core dumped)
Make config.vol_label a pointer to the label in argv, rather than
copying it into a too small buffer.
Signed-off-by: Mike Fleetwood <mike.fleetwood@googlemail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In case of embedded devices, where /etc/ is mounted as 'read-only'.
We donot have the /etc/mtab file. So, checking if the device is already
mounted from this file is not sufficient.
Try to read /proc/mounts in case of failure from /etc/mtab.
Issue logs:
/dev/sdb4 /mnt vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,
iocharset=ascii,errors=remount-ro 0 0
Here device - sb4 is already mounted.
But, when trying to format using mkfs.f2fs
F2FS-tools: Ver: 1.1.0 (2013-01-14)
Info: sector size = 512
Info: total sectors = 13108784 (in 512bytes)
WARN: Align start sector number in a unit of pages
i.e., start sector: 2542124, ofs:4 (sectors per page: 8)
Info: zone aligned segment0 blkaddr: 186
Info: This device doesn't support TRIM
Info: format successful
After Change:
F2FS-tools: Ver: 1.1.0 (2013-01-14)
Error: /dev/sdb4 is already mounted
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
