pass1.c: Treat inodes with a low dtime (that were from a corrupted
orphan list) specially.
problem.c, problem.h: Add new problem codes PR_1_LOW_DTIME and
PR_1_ORPHAN_LIST_REFUGEES, and a new latch group, PR_LATCH_LOW_DTIME.
problemP.h: Expand the size of the problem flag to be an int instead
of a short. Expand space in the flag word which is reserved for
problem latch flags from 3 bits to 8 bits.
ChangeLog, expect.1, expect.2, image.gz, name:
f_badorphan: New test which verifies corrupted orphan list handling.
super.c (check_super_block): Be more strict on checking
s_r_blocks_count superblock field.
problem.c, problem.h (PR_0_JOURNAL_UNSUPP_ROCOMPAT,
PR_0_JOURNAL_UNSUPP_INCOMPAT, PR_0_JOURNAL_RESET_COMPAT): New problem
codes.
journal.c (e2fsck_journal_load): Use a problem code to report
unsupported feature flags. There is code to clear unsupported flags,
but since this is dangerous, it's not allowed in the problem code
table.
journal.c (e2fsck_journal_reset_super): initialize the journal
sequence number to a random value to avoid recovering bad transactions
from a corrupt journal.
pass1.c (e2fsck_pass1): Cap the maximum legal size of a file by the
limit caused by the fact that i_blocks is in 512 byte units, and that
the Linux buffer cache also fundamentally assumes 512 byte sectors.
Make sure that the journal inode is a regular file, and when clearing
an unused journal inode, make sure the icount db is updated.
problem.c, problem.h (PR_1_JOURNAL_BAD_MODE): Add new problem code.
ChangeLog, journal.c:
journal.c (e2fsck_journal_fix_unsupported_super): Remove unused
function. Add FIXME notes to e2fsck_get_journal(), from Andreas
Dilger.
problem.c: For PR_1_RESERVED_BAD_MODE, print a description of the
reserved inode. In PR_0_JOURNAL_HAS_JOURNAL, prompt to clear the
journal, rather than deleting it (which is more accurate). (From
Andreas Dilger.)
journal.c (e2fsck_journal_fix_bad_inode): Set pctx->ino to the bad
journal number.
problem.c (PR_0_JOURNAL_BAD_INODE): Use pctx->ino instead of pctx->num
when printing the bad journal inode number.
pass1.c (e2fsck_pass1): Moved journal inode handling out to its own
block; if the journal inode is not in use, and it contains data, offer
to clear it.
problem.h, problem.c (PR1_JOURNAL_INODE_NOT_CLEAR): Add new problem
code.
problem.c: Modified problem table to use a new abbreviations.
pass1b.c: Change routines to use PR_1B_BLOCK_ITERATE when reporting
problems rather than using com_err directly.
problem.c, problem.h (PR_1B_BLOCK_ITERATE): Add new problem code.
message.c (expand_percent_expression): Add safety check. If ctx->str
is NULL, print "NULL" instead of dereferencing the null pointer.
pass1b.c, pass2.c, pass3.c: Change calls to ext2fs_block_iterate to
ext2fs_block_iterate2, to support 64-bit filesizes and to speed things
up slightly by avoiding the use of the ext2fs_block_iterate's
compatibility shim layer.
version.h:
Update for WIP release.
super.c (release_inode_block, release_inode_blocks,
release_orphan_inodes): Add code to deal with truncating inodes which
are still in use (but which are on the orphan list because they need
truncation).
problem.c, problem.h: Rename PR_0_CLEAR_ORPHAN_INODE to
PR_0_ORPHAN_CLEAR_INODE, and remove PR_0_ORPHAN_INODE_INUSE.
journal.c (e2fsck_run_ext3_journal): Add i18n support, and print a
message when the journal is being recovered.
journal.c (e2fsck_journal_load): Fix **nasty** bug which caused
e2fsck_check_ext3_journal to smash the journal because
journal->j_transaction_sequence wasn't getting initialized.
journal.c: (recover_ext3_journal, e2fsck_run_ext3_journal): Move call
to e2fsck_clear_recover from recover_ext3_journal to after the
filesystem has been closed and reopened. Otherwise, the superblock in
the filesystem handle will probably be stale, and will overwrite the
newer version of the superblock written by the log recovery.
message.c (expand_inode_expression): Add support for %Iu and %Ig
problem.h (PR_0_CLEAR_ORPHAN_INODE): Add new problem code.
super.c (release_orphan_inodes, release_inode_block,
release_inode_blocks): Update the block group descriptor counts when
freeing the orphan inode. Use PR_0_CLEAR_ORPHAN_INODE to report when
we clear an orphan.
journal.c (e2fsck_run_ext3_journal): Fix a bug where we attempted to
reopen the filesystem using the device name instead of the filesystem
name.
Makefile.in: Update the make dependencies
problem.c, problem.h: Add the problem codes:
PR_0_ORPHAN_ILLEGAL_BLOCK_NUM, PR_0_ORPHAN_ALREADY_CLEARED_BLOCK,
PR_0_ORPHAN_ILLEGAL_HEAD_INODE, PR_0_ORPHAN_ILLEGAL_INODE,
PR_0_ORPHAN_INODE_INUSE
super.c (release_inode_blocks, release_orphan_inodes,
check_super_block): Add support for clearing orphaned inodes from the
unmounted filesystem.
journal.c (e2fsck_recover_ext3_journal): Remove the last orphan check;
this is now handled in check_super_block --- non-journaled filesystems
can use the orphan list in the future. Also, move the the re-opening
of the filesystem to e2fsck_run_ext3_journal().
debugfs.c:
debugfs.c (finish_range): Make sure the pager FILE pointer to use.
configure, configure.in, ChangeLog:
configure.in (JFS_DEBUG): Add support for --enable-jfs-debug
journal.c: implement loading of ext3 journal for recovery code
problem.c (fix_problem): return answer from PR_AFTER_CODE to caller.
Add journal problems.
recovery.c (journal_recover): user-space ext3 journal recovery code
unix.c (main) : check journal and do recovery in separate steps
jfs.h, recovery.c: Files ext3 kernel code.
jfs_compat.h: Compatibility header file to allow kernel code to be
linked to e2fsck.
pass5.c (check_block_bitmaps, check_inode_bitmaps): Add error checking
for a "should never happen case".
problem.c, problem.h (PR_5_COPY_IBITMAP_ERROR,
PR_5_COPY_BBITMAP_ERROR): Add new error codes.
pass1.c (pass1, check_size): Apply patch from Chris Wedgewood
(cw@foof.org) which checks to see if special devices have a non-zero
size, and deals with it.
problem.c, problem.h (PR1_SET_NONZSIZE): Add new problem code.
problem.c, problem.h (PR_0_HURD_CLEAR_FILETYPE): Add new problem code.
super.c (check_super_block): If the OS type in the superblock is the
Hurd, check to see if the filetype feature is set, and offer to clear
it if so. This needs to be done since the Hurd doesn't properly
support the filetype feature. (And since the hurd allows the
transmogrification of files to special files and vice versa --- for no
good reason that I can understand --- it can't support the filetype
feature for the forseeable future, either.)
ChangeLog, mke2fs.c:
mke2fs.c (main): We forcibly turn off the filetype feature if the OS
is the hurd, since the hurd doesn't support it. (And since the hurd
allows the transmogrification of files to special files and vice versa
--- for no good reason that I can understand --- it can't support the
filetype feature for the forseeable future, either.)
mke2fs.c (proceed_question): Fix reversed sense of proceed_question
that was busted due to the internationalization patch. Fixed bug
where if proceed_question was called twice, the input buffer wasn't
cleared of the previous question's newline.
ChangeLog, expect.1, expect.2, image.gz, name:
f_hurd: Add test for Hurd-specific features (right now, just checks to
make sure the filetype feature is cleared)
ChangeLog, ls.c:
ls.c (list_super): Change the string displayed for the Hurd to be
GNU/Hurd, instead of just "GNU".
pass1.c (check_immutable, e2fsck_pass1_check_device_inode): Check for
the append-only as well as the immutable flag.
problem.c (PR_1_SET_IMMUTABLE): Adjust message to include append-only
flag. Fix comment for compression flag.
unix.c (main): If compression is enabled on the filesystem, print a
warning message (for now).
message.c: Add new compression shortcut: @c == compress
problem.c, problem.h (PR_1_COMPR_SET): Add new error code.
pass1.c (check_blocks): If the inode has EXT2_COMPRBLK_FL flag set,
check to see if the filesystem supports compression. If it does pass
this information down to process_block() so it can treat the
compressed block flag words correctly. If not, offer to clear the
flag, since it shouldn't be set.
(process_block): If an inode has the compressed inode flag set, allow
EXT2FS_COMPRESSED_BLKADDR.
pass1b.c (process_pass1b_block, delete_file_block, clone_file_block):
pass2.c (deallocate_inode_block): Use HOLE_BLKADDR to check to see if
the block can be skipped.
ChangeLog, Makefile.in:
Makefile.in: Exclude the internationalization files from being
distributed.
ChangeLog, configure, configure.in:
configure.in: Add support for --enable-compression. This is
experimental code only for now, which is why it's under --enable test.
Once it's stable, it will always be compiled in.
TODO:
Commit additional TODO items.
problem.c (fix_problem): Support a new flag, PR_PREEN_NO which means
the answer is assumed to be no in preen mode. This is now used in the
PR_1_SET_IMMUTABLE code, so that in preen mode we ignore these inodes
and just print a warning message.
pass1.c (e2fsck_pass1): If the filesystem does not support imagic
inodes, if an inode has the imagic flag set, offer to clear the imagic
flag. If a valid device/fifo/socket has the immutable flag set, call
the new helper function check_immutable() to offerto clear the
immutable flag.
pass2.c (check_filetype): Use the new ext2_file_type() helper function
instead of calculating the file_type information manually.
pass3.c (e2fsck_reconnect_file): When adding a link to lost+found,
calculate the filetype information so that ext2fs_link() can use the
information if applicable. (get_lost_and_found): Create the
/lost+found directory with the correct filetype information if
applicable.
util.c (ext2_file_type), e2fsck.h: New function which returns the
directory entry file type information given the inode's mode bits.
problem.c, problem.h: Added new problem codes PR_1_SET_IMAGIC and
PR_1_SET_IMMUTABLE.
ChangeLog, mke2fs.8.in:
mke2fs.8.in: Update manual page so that the sparse_option filesystem
option is properly named.
problem.c, problem.h (PR_2_NULL_NAME): Add new problem code.
pass2.c (check_dir_block): Require that the length of the directory
entry be at least 12 bytes. Check to see if the filename is
zero-length, and flag that as an error.
pass2.c (check_filetype): If the filetype filesystem feature is not
set, and a directory entry has a dirent feature, offer to clear it
(since 2.0 kernels will do complain will interpret it as a very large
name length field).
pass4.c (e2fsck_pass4): If an inode is set in the inode_imagic_map
bitmap, don't check to see if it is disconnected from the inode tree
(because it almost certainly will be). Free inode_imagic_map at the
end of pass 4.
pass2.c (check_dir_block, check_filetype): If the FILETYPE feature is
set, check the directory entry's filetype information field, and
fix/set it if necessary. (e2fsck_pass2): Free the inode_reg_map
bitmap at the end of pass 2.
pass1.c (e2fsck_pass1, alloc_imagic_map): Allocate and fill in
information for inode_reg_map and inode_imagic_map, which indicates
which inodes are regular files and AFS inodes, respectively.
Since only the master superblock is written during a restart, force
that superblock to be used after a restart; otherwise changes to the
block group descriptors end up getting ignored.
problem.c, problemP.h: If e2fsck is run -n, make def_yn variable be 0
for "no". Add support for a new flag, PR_NO_NOMSG, which supresses
the problem message if e2fsck is run with the -n option.
problem.c, problem.h (PR_2_SET_FILETYPE, PR_2_BAD_FILETYPE): Add new
problem codes.
message.c (expand_dirent_expression): Add support for %dt which prints
the dirent type information.
e2fsck.c (e2fsck_reset_context): Free new bitmaps (inode_reg_map and
inode_imagic_map).
e2fsck.h (e2fsck_t): Add new inode_reg_map and inode_magic_map to the
context structure.
ChangeLog, nt_io.c:
nt_io.c: New file which supports I/O under Windows NT.
ChangeLog, gen_uuid_nt.c:
gen_uuid_nt.c: New file which creates a UUID under Windows NT.
Many files:
Add support for non-Unix compiles
problem.c, problem.h (PR_0_INODE_COUNT_WRONG): Add new problem code.
super.c (check_super_block): Add check to make sure the total number
of inodes is sane, since this can be calculated from the number of
groups times the number of inodes per group. Offer to correct it if
it is incorrect.
util.c (print_resource_track): Use mallinfo if present to get more
accurate malloc statistics.
pass3.c (get_lost_and_found): Check to see if lost+found is a plain
fail; if so, offer to unlink it.
problem.c, problem.h (PR_3_LPF_NOTDIR): Add new problem code.
problem.c: Fix problem message for PR_1_BAD_GROUP_DESCRIPTORS so that
the block group number is printed. Add new prompt, PROMPT_UNLINK.
pass3.c (get_lost_and_found): If the filesystem is not opened
read-only, then force /lost+found to be created if it is not present.
problem.c: Allow PR_3_NO_LF_DIR to be handled during a preen operation.
ChangeLog, Makefile.in:
Makefile.in: Updated dependencies.
ChangeLog, fsck.c:
fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of relying
on getmntent(). This has the advantage of allowing us to properly
handle missing pass numbers correctly.
ChangeLog, configure.in:
configure.in: Add paths.h to header files for which we search.
tune2fs.8.in: Fix minor display bug in the nroff.
mke2fs.c (show_stats, write_inode_tables): Use the log10 function to
calculate the display of block numbers so that things look nice on an
80 character display.
mke2fs.c (usage): Add the sparse-super-flag to the usage message.
ChangeLog, e2fsck.c, pass1.c, pass2.c, problem.c, problem.h, unix.c:
unix.c (main): Move ext2fs_close() after e2fsck_free_context() since
e2fsck_free_context may reference data in ctx->fs.
e2fsck.c (e2fsck_reset_context): Make sure ctx->fs is non-NULL before
checking ctx->fs->dblist.
pass1.c (e2fsck_pass1): Use the device check subroutine on FIFO's and
Socket's, so that we catch bogus immutable inodes.
pass2.c (process_bad_inode): Process bad socket and fifo's.
problem.h, problem.c: Define new problem codes PR_2_BAD_FIFO and
PR_2_BAD_SOCKET.
problem.c: Add PR_3_NO_DIRINFO error code.
super.c (check_super_value): Rename min and max to min_val and max_val
to avoid possible cpp macro conflicts.
pass4.c (e2fsck_pass4): Rename max to maxgroup, to avoid possible cpp
macro conflicts.
pass3.c (e2fsck_pass3): Rename max to maxdirs, to avoid possible cpp
macro conflicts.
(check_directory): Fix logic to avoid possible core dump in the
case of ext2fs_get_dir_info returning NULL. (By the time we get here,
it should never happen, but...). Also simply/streamline the control
flow of the function.
unix.c: Fix bug in check of feature set, to make sure we can really
fix this filesystem.
problem.h: Make blkcount type to be of type blkcnt_t. Make the num
field be a 64 bit type. Add the problem code PR_1_FEATURE_LARGE_FILES
problem.c: Add table entry for the problem code PR_1_FEATURE_LARGE_FILES.
pass1.c (e2fsck_pass1): A non-zero i_dir_acl field is only a problem
for directory inodes. (Since it is also i_size_high now.) If there
are no large_files, then clear the LARGE_FLAG feature flag. If there
are large_files, but the LARGE_FLAG feature flag is not set, complain
and offer to fix it.
(check_blocks): Add support to deal with non-directory inodes that
have i_size_high set (i.e., large_files). Don't give an error if a
directory has preallocated blocks, to support the DIR_PREALLOC
feature.
(process_block, process_bad_block): The blockcnt variable is a type of
blkcnt_t, for conversion to the new block_iterate2.
pass2.c (process_bad_inode): A non-zero i_dir_acl field is only a
problem for directory inodes. (Since it is also i_size_high now.)
message.c (expand_inode_expression): Print a 64-bits of the inode size
for non-directory inodes. (Directory inodes can only use a 32-bit
directory acl size, since i_size_high is shared with i_dir_acl.) Add
sanity check so that trying to print out the directory acl on a
non-directory inode will print zero. (expand_percent_expression): %B
and %N, which print pctx->blkcount and pctx->num, can now be 64 bit
variables. Print them using the "%lld" format if EXT2_NO_64_TYPE is
not defined.
e2fsck.h: Add the large_flagsfield to the e2fsck context.
e2fsck.c (e2fsck_reset_context): Clear the large_flags field.
ChangeLog, expect.1:
f_messy_inode: Modify test to deal with changes to support 64-bit size
files. (/MAKEDEV had i_dir_acl, now i_size_high, set.)
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c: Add calls to the progress
indicator function.
pass1.c (scan_callback): Add call to the progress feedback function
(if it exists).
super.c (check_super_block): Skip the device size check if the
get_device_size returns EXT2_EXT_UNIMPLEMENTED.
iscan.c (main): Don't use fatal_error() anymore.
pass1b.c, swapfs.c, badblocks.c: Set E2F_FLAG_ABORT instead of calling
fatal_error(0).
problem.c, pass3.c (PR_3_ROOT_NOT_DIR_ABORT,
PR_3_NO_ROOT_INODE_ABORT): New problem codes.
problem.c, pass2.c (PR_2_SPLIT_DOT): New problem code.
problem.c, pass1.c (PR_1_SUPPRESS_MESSAGES): New problem code.
problemP.h: New file which separates out the private fix_problem data
structures.
util.c, dirinfo.c, pass1.c, pass1b.c, pass2.c, pass5.c, super.c,
swapfs.c util.c: allocate_memory() now takes a e2fsck context as its
first argument, and rename it to be e2fsck_allocate_memory().
problemP.h:
New file which contains the private problem abstraction definitions.
Makefile.pq:
Remove include of MAKEFILE.STD, which doesn't exist at this point.
pass*.c, super.c: Massive changes to avoid using printf and com_err
routines. All diagnostic messages are now routed through the
fix_problem interface.
pass2.c (check_dir_block): Check for duplicate '.' and '..' entries.
problem.c, problem.h: Add new problem codes PR_2_DUP_DOT and
PR_2_DUP_DOT_DOT.
problem.c: Added new problem codes for some of the superblock
corruption checks, and for the pass header messages. ("Pass
1: xxxxx")
util.c (print_resource_track): Now takes a description argument.
super.c, unix.c, e2fsck.c: New files to separate out the
operating-specific operations out from e2fsck.c. e2fsck.c now
contains the global e2fsck context management routines, and
super.c contains the "pass 0" initial validation of the
superblock and global block group descriptors.
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c, util.c: Eliminate
(nearly) all global variables and moved them to the e2fsck
context structure.
problem.c, problem.h: Added new problem codes PR_0_SB_CORRUPT,
PR_0_FS_SIZE_WRONG, PR_0_NO_FRAGMENTS, PR_0_BLOCKS_PER_GROUP,
PR_0_FIRST_DATA_BLOCK
expect.1, expect.2:
Updated tests to align with e2fsck problem.c changes.
message.c: Add compression for the word "Illegal"
problem.c: Added entries for PR_2_BAD_CHAR_DEV and PR_2_BAD_BLOCK_DEV
pass1.c (pass1, check_device_inode), pass2.c (process_bad_inode): Use
a more stringent test for a valid device.
ChangeLog, Makefile.in:
Makefile.in (install): Fix rm command to use $(DESTDIR) appropriately.
pass1.c (mark_table_blocks): Mark the superblock and group descriptor
blocks first, so that any conflicts between these and the bitmap or
inode table blocks is noticed.
problem.c: Fix message printed out when a block or inode bitmap
conflicts with other fs data, has the correct group number in it.
