Add new btrfsck option, '--chunk-root', to specify chunk root bytenr.
And allow open_ctree_fs_info() function accept chunk_root_bytenr to
override the bytenr in superblock. This will be mainly used when chunk
tree corruption.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since now open_ctree_fs_info() can even return a valid fs_info with only
system chunk mapping from super block, use this ability to do chunk root
search for heavily damanged fs.
As an fast alternative for time consuming and buggy chunk-recovery.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch add all missing btrfs_close_all_devices() to standalone
tools in btrfs progs, to avoid memory leak.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[Bug]
When given '-a' option, btrfs-find-root will output all possible tree
roots but the exact matched one.
[Reason]
Result printing skipes the exact match one, as it will normally be shown
before the alternative ones.
But when '-a' is given, that's not the case.
[Fix]
Just show the exact match one for search all case.
Reported-by: Marc Merlin <marc@merlins.org>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add option '-a' for btrfs-find-root to iterate all the metadata extents
even the root is already found.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since we switched to new open_ctree flag and new find-root facility,
there is no need to keep the old find-root codes.
Clean it up.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since the new find-root infrastructure is here with better root
judgement with less codes, just switch to it.
To switch to the new infrastructure, new print function is added and
output format is slighted changed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Before the patch, btrfs-find-root will only consider it find a good root
if its generation matches generation in superblock and its level is
currently found highest level.
But that's not correct in 2 ways.
1) Root with decreased level
Since tree level can decrease, like subvolume/file deletion.
Which will make the new root have higher generation but lower level.
2) Root not updated in latest transaction.
If there is some root not updated in latest transaction, its generation
will be smaller than the one in superblock, and btrfs-find-root will not
find it.
This patch will use different generation for different tree to search,
solving the above problems.
Currently, it only supports generation/level in superblock. Using tree
root level/generation if possible will be introduced later.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since in previous patches, we introduced the new open_ctree flag
OPEN_CTREE_CHUNK_ROOT_ONLY, switch btrfs-find-root to use it instead of
the open_ctree_broken().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When we go to fixup the dev items after a restore we scan all existing devices.
If you happen to be a btrfs developer you could possibly open up some random
device that you didn't just restore onto, which gives you weird errors and makes
you super cranky and waste a day trying to figure out what is failing. This
will make it so that we use the fd we've already opened for opening our ctree.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
- use standard PACKAGE_{NAME,VERSION,STRING,URL,...} autoconf macros
rather than homemade BTRFS_BUILD_VERSION
- don't #include version.h, now the file is necessary for library API only
Note that "btrfs version" returns "btrfs-progs <version>" instead of
the original confusing "btrfs <version>".
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
glibc 2.10+ (5+ years old) enables all the desired features:
_XOPEN_SOURCE 700, __XOPEN2K8, POSIX_C_SOURCE, DEFAULT_SOURCE; with a
single _GNU_SOURCE define in the makefile alone. For portability to
other libc implementations (e.g. dietlibc) _XOPEN_SOURCE=700 is also
defined.
This also resolves Debian bug report filed by Michael Tautschnig -
"Inconsistent use of _XOPEN_SOURCE results in conflicting
declarations". Whilst I was not able to reproduce the results, the
reported fact is that _XOPEN_SOURCE set to 500 in one set of files
(e.g. cmds-filesystem.c) generates/defines different struct stat from
other files (cmds-replace.c).
This patch thus cleans up all feature defines, and sets them at a
consistent level.
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747969
Signed-off-by: Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now commands mentioned below (with in [..]) are calling call register-device
ioctl BTRFS_IOC_SCAN_DEV for all the devices in the system.
Some issues with it:
BTRFS_IOC_SCAN_DEV: ioctl is a write operation, we don't want command like
btrfs-debug-tree threads to do that..
eg:
----
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
0
$ btrfs-debug-tree /dev/sde (num_device > 1)
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
5
----
btrfs_scan_fs_devices() ends up calling this ioctl only when num_device > 1.
That's inconsistency with in feature/bug.
We don't have to register _all_ the btrfs devices (again) in the system
without user consent.
Why its inconsistent:
function btrfs_scan_fs_devices() calls btrfs_scan_lblkid only when
num_devices is > 1, which in turn calls BTRFS_IOC_SCAN_DEV ioctl, if
conditions are met.
But main issue is we have too many consumers of btrfs_scan_fs_devices()
the names below with in [] is the cli leading to this function.
open_ctree_broken() [btrfs-find-root]
recover_prepare() [btrfs rescue super-recover]
__open_ctree_fd
(updates always except when flag OPEN_CTREE_RECOVER_SUPER is set and
flag OPEN_CTREE_RECOVER_SUPER is set only by 'btrfs rescue super-
recover' but still this thread sneaks through the open_ctree function
to call register-device-ioctl as show below).
open_ctree_fs_info
[btrfs-debug-tree]
[btrfs-image -r]
[btrfs check]
open_fs
[btrfs restore]
open_ctree
[calc-size]
[btrfs-corrupt-block]
[btrfs-image] (create)
[btrfs-map-logical]
[btrfs-select-super]
[btrfstune]
[btrfs-zero-log]
[tester]
[mkfs]
[quick-test.c]
[btrfs label set unmounted]
[btrfs get label unmounted]
[btrfs rescue super-recover]
open_ctree_fd
[btrfs-convert]
Fix:
In an effort to make register-device consistent, all calls to
btrfs_scan_fs_devices() will have 5th parameter set to 0. that means
we don't need 5th parameter at all. And with this function not calling
the register ioctl at all, finally we will have following two cli to call
the ioctl BTRFS_IOC_SCAN_DEV.
btrfs dev scan and
mkfs.btrfs
Threads needing to update kernel about a device would have to use
btrfs_register_one_device() separately.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since this patch:
btrfs-progs: move the check_argc_* functions into utils.c
All tools including the independent tools(e.g. btrfs-image, btrfs-convert)
can share the convenience of the check_argc_* functions, so this patch
adopt the argc check functions globally.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Btrfs-progs superblock checksum check is somewhat too restricted for
super-recover, since current btrfs-progs will only read the 1st
superblock and if you need super-recover the 1st superblock is
possibly already damaged.
The fix is introducing super_recover parameter for
btrfs_read_dev_super() and callers to allow scan backup superblocks if
needed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
It complains errno never gets assigned to zero in find-root and since
errno anyway is zero at program started up, lets remove it.
Check "copy is less then zero" isn't possible because strtoull used by
arg_strtou64 wouldn't return -ve number.
Trivial space fixes.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
switch to arg_strtou64 plus some cleanups to remove unnecessary
codes.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Internally, btrfs_header_chunk_tree_uuid() calculates an unsigned
long, but casts it to a pointer, while all callers cast it to unsigned
long again.
From btrfs commit b308bc2f05a86e728bd035e21a4974acd05f4d1e
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If some fatal superblocks are damaged, running ioctl will return failure,
in this case, we should avoid run ioctl.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This silences (reasonable) sparse warnings of the form:
warning: non-ANSI function declaration of ..
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Mark many functions as static, and remove any resulting dead code.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
For most time, In open_ctree_*(), we use the first superblock
(BTRFS_SUPER_INFO_OFFSET). However, for btrfs-convert, we don't,
we should pass the correct sb_bytenr to btrfs_scan_fs_devices() rather
than always use BTRFS_SUPER_INFO_OFFSET.This patch fix the following
regression:
mkfs.ext2 <dev>
btrfs-convert <dev>
warning, device 1 is missing
Check tree block failed, want=2670592, have=0
read block failed check_tree_block
Couldn't read chunk root
Segmentation fault (core dumped)
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.
Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header and
btrfs_super.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some commands(such as btrfs-convert) access the devices again after we close
the ctree, so it is better that we don't free the devices objects when the ctree
is closed, or we need re-allocate the memory for the devices. We needn't worry
the memory leak problem, because all the memory will be freed after the taskes
die.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
As we know, the file descriptor 0 is a special number, so we shouldn't
use it to initialize the file descriptor of the devices, or we might
close this special file descriptor by mistake when we close the devices.
"-1" is a better choice.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
For any btrfs-$FOO executable, rename the main source file from
$FOO.c to to btrfs-$FOO.c
This makes it slightly more obvious what's building what,
and allows us to write a default rule in the Makefile for
these tools.
(also add btrfs-calc-size to the list of objects to remove
on make clean)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
