When the 'btrfsune -u' command is interrupted, the final filesystem fsid
is not written to the superblock and it cannot be mounted. Too bad that
'btrfstune' cannot continue to finish the UUID change as it should.
This patch fixes that and passes the relaxed flags for superblock and
only warns when it detects the fsid mismatch. As this is something that
should be noted in case it would be needed for further debugging, it's
not just silent.
Signed-off-by: David Sterba <dsterba@suse.com>
For easier debugging, let print_tree_block_error() print bytenr of tree
block.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
New flag that mimics OPEN_CTREE_IGNORE_FSID_MISMATCH but only for
reading the superblock. It should be passed around to various helpers
like scan or mount checks as they'd fail before we'd get to the final
caller that can do something useful with the filesystem.
This will be used for an interrupted 'btrfstune -u'.
Note to __open_ctree_fd: the RECOVERY mode is not compatible with that
flag
Signed-off-by: David Sterba <dsterba@suse.com>
This function already takes a transaction handle which has a reference
to the fs_info, so use that to obtain it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function actually uses only the extent_buffer arg but takes 3
arguments. Furthermore, it's current interface doesn't even mirror
the kernel counterpart. Just remove the extra arguments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old flag OPEN_CTREE_FS_PARTIAL is in fact quite easy to be confused
with OPEN_CTREE_PARTIAL, which allow btrfs-progs to open damaged
filesystem (like corrupted extent/csum tree).
However OPEN_CTREE_FS_PARTIAL, unlike its name, is just allowing
btrfs-progs to open fs with temporary superblocks (which only has 6
basic trees on SINGLE meta/sys chunks).
The usage of FS_PARTIAL is really confusing here.
So rename OPEN_CTREE_FS_PARTIAL to OPEN_CTREE_TEMPORARY_SUPER, and add
extra comment for its behavior.
Also rename BTRFS_MAGIC_PARTIAL to BTRFS_MAGIC_TEMPORARY to keep the
naming consistent.
And with above comment, the usage of FS_PARTIAL in dump-tree is
obviously incorrect, fix it.
Fixes: 8698a2b9ba ("btrfs-progs: Allow inspect dump-tree to show specified tree block even some tree roots are corrupted")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using the internal struct extent_io_tree, use struct fs_info.
This does not only unify the interface between kernel and btrfs-progs,
but also makes later btrfs_print_tree() use fewer parameters.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When device is missing, read_extent_data() (function exported from old
btrfs check code) has the following problems:
1) Modifies @len parameter if device is missing
If device returned in @multi is missing, @len can be larger than
@max_len (originl length).
This could confuse caller and underflow in the read loop.
2) Still returns 0 for missing device
It only handles read error, missing device is not handled and 0 is
returned.
3) Wrong check for device->fd
In fact, 0 is also a valid fd.
Although not possible under most cases, but still needs fix.
Fix them all.
Fixes: 1bad2f2f2d ("Btrfs-progs: fsck: add an option to check data csums")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As btrfs is specific to Linux, %m can be used instead of strerror(errno)
in format strings. This has some size reduction benefits for embedded
systems.
glibc, musl, and uclibc-ng all support %m as a modifier to printf.
A quick glance at the BIONIC libc source indicates that it has
support for %m as well. BSDs and Windows do not but I do believe
them to be beyond the scope of btrfs-progs.
Compiled sizes on Ubuntu 16.04:
Before:
3916512 btrfs
233688 libbtrfs.so.0.1
4899 bcp
2367672 btrfs-convert
2208488 btrfs-corrupt-block
13302 btrfs-debugfs
2152160 btrfs-debug-tree
2136024 btrfs-find-root
2287592 btrfs-image
2144600 btrfs-map-logical
2130760 btrfs-select-super
2152608 btrfstune
2131760 btrfs-zero-log
2277752 mkfs.btrfs
9166 show-blocks
After:
3908744 btrfs
233256 libbtrfs.so.0.1
4899 bcp
2366560 btrfs-convert
2207432 btrfs-corrupt-block
13302 btrfs-debugfs
2151104 btrfs-debug-tree
2134968 btrfs-find-root
2281864 btrfs-image
2143536 btrfs-map-logical
2129704 btrfs-select-super
2151552 btrfstune
2130696 btrfs-zero-log
2276272 mkfs.btrfs
9166 show-blocks
Total savings: 23928 (24 kilo)bytes
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a couple of places where instead of the more succinct
list_for_each_entry the code uses list_for_each. This results in
slightly more code with no additional benefit as well as no
coherent pattern. This patch makes the code uniform. No functional
changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ remove unused variable in uuid_search ]
Signed-off-by: David Sterba <dsterba@suse.com>
Closing the fs will try to commit a pending transaction, but may fail to
do so if the filesystem state is not well defined. This will eg. fail
for some fuzz tests. The data structures are freed but no furhter
attempt to commit is made.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently transaction bugs out insided btrfs_start_transaction in case
of error, we want to lift the error handling to the callers. This patch
adds the BUG_ON anywhere it's been missing so far. This is not the best
way of course. Transforming BUG_ON to a proper error handling highly
depends on the caller and should be dealt with case by case.
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_read_block_groups could loop if the metadata are
damaged (reported eg. for an unaligned block), due to lack of error
handling. We have to check for restored images or currently created
filesystems, that do not contain the blockgroups.
Can be reproduced by fuzzed image bko-155551.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=155551
Reported-by: Lukas Lueg <lukas.lueg@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tree blocks are always nodesize. As readahead is only an optimization,
exact size is not required and is only advisory.
Signed-off-by: David Sterba <dsterba@suse.com>
Metadata blocks are always nodesize. When reading the
superblock::sys_array, the actual size of data is fixed to 4k and
smaller than nodesize, but otherwise everything works as before.
Signed-off-by: David Sterba <dsterba@suse.com>
The tree blocks are supposed to be always of nodesize. Before the
parameter has been dropped, it was unlikely but possible to pass a
misaligned value.
Signed-off-by: David Sterba <dsterba@suse.com>
Just to keep the 1st paramter the same as kernel.
We can also save a few lines since the parameter is shorter now.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only reasom read_tree_block() needs a btrfs_root parameter is to get
its node/sector size.
And long ago, I have already introduced a compactible interface,
read_tree_block_fs_info() to pass btrfs_fs_info instead of btrfs_root.
Since we have cleaned up all root->sector/node/stripesize users, we
should be OK to refactor read_tree_block() function.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Since we have cached block sizes in fs_info, there is no need to specify
these sizes in btrfs_setup_root() function.
And refactor all root->sector/node/stripesize users in disk-io.c.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
btrfs_fs_info
Just like what we do in kernel, since we will not support different
leaf/node/stripe size per tree, there is no need to store these block
sizes in btrfs_root.
This patch will introduce these block size members into btrfs_fs_info
structure, allowing us to convert such usage in later patches.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Leafsize is deprecated for a long time, and kernel has already updated
ctree.h to rename sb->leafsize to sb->__unused_leafsize.
This patch will remove normal users of leafsize:
1) Remove leafsize member from btrfs_root structure
Now only root->nodesize and root->sectorisze.
No longer root->leafsize.
2) Remove @leafsize parameter from btrfs_setup_root() function
Since no root->leafsize, no need for @leafsize parameter.
The remaining user of leafsize will be:
1) btrfs inspect-internal dump-super
Reformat the "leafsize" output to "leafsize (deprecated)" and
use le32_to_cpu() to do the cast manually.
2) mkfs
We still need to set sb->__unused_leafsize to nodesize.
Do the manual cast too.
3) convert
Same as mkfs, these two superblock setup should be merged later
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Fuzzed image bko-161821.raw causes btrfs check to get segmentation fault.
The function check_owner_ref attempts to access a non-exist quota tree
when dealing with extent_item [4198400 4096] in the corrupted filesystem.
The function btrfs_new_fs_info always allocates memory for
fs_info->quota_root regardless of whether quota_tree exists or not.
Additionally, the function btrfs_read_fs_root will directly return
fs_info->quota_root if location->objectid == BTRFS_QUOTA_TREE_OBJECTID.
This patch does the following things:
1. Do extra check and return ENOENT if quota tree does not exist in the
function btrfs_read_fs_root.
2. Free useless fs_info->quota_root in the function btrfs_setup_all_roots
to reduce confusion.
3. free_extent_buffer even if check_child_node failed in the function
walk_down_tree.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the final fsync() on the Btrfs device fails, we just swallow the
error and don't alert the user in any way. This was uncovered by xfstest
generic/405, which checks that mkfs fails when it encounters EIO.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Large numbers like (1024 * 1024 * 1024) may cost reader/reviewer to
waste one second to convert to 1G.
Introduce kernel include/linux/sizes.h to replace any intermediate
number larger than 4096 (not including 4096) to SZ_*.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
root->highest_inode is not accurate at the time of creating a lost+found
and it fails because the highest_inode+1 is already present. This could be
because of fixes after highest_inode is set. Instead, search
for the highest inode in the tree and use it for lost+found.
This makes root->highest_inode unnecessary and hence deleted.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If this flag is passed to open_ctree(), we'll clear the
FREE_SPACE_TREE_VALID compat_ro bit. The kernel will then reconstruct
the free space tree the next time the filesystem is mounted.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It seems like bad idea to use a library name (lblkid) within generic
function name. The currently used scanning library is implementation
detail and this detail should be hidden for rest of the code.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If blocksize is 0, it passes the IS_ALIGNED check but fails later as the
length of ebs will be zero.
Reported-by: Lukas Lueg <lukas.lueg@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=169311
Signed-off-by: David Sterba <dsterba@suse.com>
