The helper open codes what we already have in the raid attr table, so
use it. We assume a valid flags so there's no error value.
Signed-off-by: David Sterba <dsterba@suse.com>
We'll use plain qgroupid parsing function elsewhere so split that part
from parse_qgroupid_or_path. The parsing is slightly reworked and goes
from start to end, while previously it looked up the slash and worked
from there. In case a valid qgroupid is also a valid path, the path must
be specified as absolute.
Signed-off-by: David Sterba <dsterba@suse.com>
This helper can parse a qgroupid or a path, so rename it accordingly, so
a plain qgroupid parsing can be factored out as a standalone helper.
Signed-off-by: David Sterba <dsterba@suse.com>
There are various parsing helpers scattered everywhere, unify them to
one file and start with helpers already in utils.c.
Signed-off-by: David Sterba <dsterba@suse.com>
Kernel patch b2f78e88052bc0bee ("btrfs: allow degenerate raid0/raid10")
in
5.15 will allow mounting and converting to single device raid0 or two
device raid10. Let mkfs create such filesystem.
"The motivation is to allow to preserve the profile type as long as it
possible for some intermediate state (device removal, conversion), or
when there are disks of different size, with raid0 the otherwise
unusable space of the last device will be used too. Similarly for
raid10, though the two largest devices would need to be the same."
Signed-off-by: David Sterba <dsterba@suse.com>
- Change it void
The old one always return csum_size.
- Use snprintf()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_format_csum() is a special helper only used in
btrfs-progs.
Move it to common/utils.[ch] other than leaving it in
kernel-shared/disk-io.c.
Since we're moving the code, also introduce a macro,
BTRFS_CSUM_STRING_LEN, to replace open-coded string length calculation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
check_running_fs_exclop() can return 1 when exclop is changed to "none"
The ret is set by the return value of the select() operation. Checking
the exclusive op changes just the exclop variable while ret is still
set to 1.
Set ret = 0 if exclop is set to BTRFS_EXCL_NONE or BTRFS_EXCL_UNKNOWN.
Remove unnecessary continue statement at the end of the block.
The command appears to have executed, but does not. This was found when
balance which typically reports chunks relocated did not print anything
on screen.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several directories in /sys/fs/btrfs/FSID that contain more
than one file/directory. Add a helper to open the directory so that the
file descriptor can be used for fdopendir.
Signed-off-by: David Sterba <dsterba@suse.com>
Compiling with clang produces warnings like:
common/utils.c:1670:31: warning: use of GNU 'missing =' extension in designator [-Wgnu-designator]
[BTRFS_EXCLOP_SWAP_ACTIVATE] "swap activate",
^
=
Use the form with '=' to fix the warning.
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of functions that are related to opening filesystem in
various modes, this can be moved to a separate file.
Signed-off-by: David Sterba <dsterba@suse.com>
Decrease dependency on system headers, remove where they're not needed
or became stale after code moved. The path-utils.h encapsulate path
operations so include linux/limits.h here, that's where PATH_MAX is
defined.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently mkfs.btrfs will output a warning message if the sectorsize is
not the same as page size:
WARNING: the filesystem may not be mountable, sectorsize 4096 doesn't match page size 65536
But since btrfs subpage support for 64K page size is coming, this output
is populating the golden output of fstests, causing tons of false
alerts.
This patch will teach mkfs.btrfs to check
/sys/fs/btrfs/features/supported_sectorsizes and check if the sector
size is supported.
Then only output above warning message if the sector size is not
supported or the file is not found (ie. kernel does not export the file
yet).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current mount detection code in btrfs receive is not quite perfect.
For example, suppose /tmp is mounted as a tmpfs. In that case,
btrfs receive /tmp2 will find /tmp as the longest mount that matches a
prefix of /tmp2 and blow up because it is not a btrfs filesystem, even
if /tmp2 is just a directory in / mounted as btrfs.
Fix this by replacing the substring check with a dirname recursion to
only check the directories in the path of the dir, rather than every
substring.
Add a new test for this case.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_open_dir already has a check whether the passed path is a
directory and if so it returns a specific error code (-3) when such an
error occurs. Use this instead of open-coding the directory check. To
avoid regression in cli/003 test also move directory checks before fs
type in btrfs_open.
Output before this check:
ERROR: resize works on mounted filesystems and accepts only
directories as argument. Passing file containing a btrfs image
would resize the underlying filesystem instead of the image.
After:
ERROR: not a directory: /root/btrfs-progs/tests/test.img
ERROR: resize works on mounted filesystems and accepts only
directories as argument. Passing file containing a btrfs image
would resize the underlying filesystem instead of the image.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Partial revert of 922eaa7b54 ("btrfs-progs: build: fix linking with
static libmount"), remove the necessary workarounds like the weak
symbols and link time warnings. Symbols renamed not to clash with
libmount (parse_size, canonicalize_path) haven't been reverted because
the new names are acceptable.
Signed-off-by: David Sterba <dsterba@suse.com>
In commit 57cfe29e69 ("btrfs-progs: utils: introduce
find_mount_fsroot") the entries in /proc/self/mountinfo are parsed by a
convenience library libmount, because getmntent does not provide the
information we need to distinguish bind mounts.
Using libmount turned out to be problematic in several ways:
- static build got broken due to clashing symbols, eg. for parsing size
or path canonicalization (#333)
- long-term distros do not have libmount new enough (2.24+) to provide
some functions (mnt_table_is_empty, #334)
- libmount internally uses getgrnam_r/mnt_get_uid/... that are not
static-build friendly, a warning is printed during link time for each
binary; we don't use any of the functions
- libmount has further library dependencies that we don't need:
$ ldd /usr/lib64/libmount.so.1
linux-vdso.so.1 (0x00007fff4f175000)
libc.so.6 => /lib64/libc.so.6 (0x00007f44a1763000)
libblkid.so.1 => /usr/lib64/libblkid.so.1 (0x00007f44a1730000)
libselinux.so.1 => /usr/lib64/libselinux.so.1 (0x00007f44a1704000)
/lib64/ld-linux-x86-64.so.2 (0x00007f44a1998000)
libpcre.so.1 => /usr/lib64/libpcre.so.1 (0x00007f44a166c000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f44a1666000)
namely selinux, pcre and dl.
Summing it up, libmount causes more trouble than it's worth using a
convenience library, we want to keep the dependencies minimal so the
custom mountinfo parser was inevitable.
Issue: #333
Issue: #334
Issue: #336
Signed-off-by: David Sterba <dsterba@suse.com>
The libmount dependency has been added in commit 61ecaff036
("btrfs-progs: build: add libmount dependency"), and static build got
broken. There are functions that do basically the same thing and also
share the name, which in turn fails at link time.
ld: /../lib64/libmount.a(libcommon_la-canonicalize.o): in function `canonicalize_dm_name':
util-linux-2.34/lib/canonicalize.c:58: multiple definition of `canonicalize_dm_name';
common/path-utils.static.o:btrfs-progs/common/path-utils.c:286: first defined here
In case the collision can be resolved by renaming, it's done
(canonicalize_path and parse_size). There are 2 symbols from selinux
that are substituted by a weak aliases during the static build.
There's one new warning due to use of getgrnam_r in libmount that
depends on dynamic linking and may not work properly with static build.
We're not using the related functions directly or indirectly, so it
should be safe to ignore the warnings.
ld: ../lib64/libmount.a(la-utils.o): in function `mnt_get_gid':
util-linux-2.34/libmount/src/utils.c:625: warning: Using 'getgrnam_r' in statically linked applications
+requires at runtime the shared libraries from the glibc version used for linking
Issue: #333
Signed-off-by: David Sterba <dsterba@suse.com>
This new function checks for filesystem path name that was mounted, thus
being different from find_mount_root. By using libmount we can easily
parse /proc/self/mountinfo file and check for the pathname field.
The function is useful to filter bind mounts with content different from
the original mount, thus making it safe to assume that the reported path
can be accessed by the user, with the right content.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The exclusive ops will not start if there's one already running. Now
that we have the sysfs export (since kernel 5.10) to check if there's
one already running, use it to allow enqueueing of the operations as a
convenience.
Supported enqueuing:
btrfs balance start --enqueue
btrfs filesystem resize --enqueue
btrfs device add --enqueue
btrfs device delete --enqueue
btrfs replace start --enqueue
This patch implements the functionality based on Goldwyn's patch
https://lore.kernel.org/linux-btrfs/?q=20200825150338.32610-4-rgoldwyn%40suse.de
but on top of previous preparatory patches.
Note that 'filesystem resize' options could confuse getopt as the
negative size change looks like a series of short options and there's no
way to make getopt ignore the short options, so there's a custom option
parser.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add helper that will either check a running operation or wait until it's
done, so that commands can be started and enqueued. If there are more
enqueued, an attempt to avoid racing is done based on the remaining
waiting time of each command.
Signed-off-by: David Sterba <dsterba@suse.com>
Since kernel 5.10, the file /sys/fs/btrfs/FSID/exclusive_operation
exports textual id of the running exclusive operation (balance, device
add/remove, ...). Add definitions and parsing functions so they can be
used to check before another operation is started and potentially
blocks.
Signed-off-by: David Sterba <dsterba@suse.com>
Add helpers to open and read sysfs files from the per-fs directory.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a function get_fsid_fd() to use an open file fd to get the
fsid of the mounted filesystem.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_scan_devices() is being used by commands such as
'btrfs filesystem' and 'btrfs device', by having the verbose argument in
the btrfs_scan_devices() we can control which threads to print the
messages when verbose is enabled by the global option.
Add an option %verbose to btrfs_scan_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add --verbose and --quiet command options to show verbose or no output
from the subcommands. By introducing global a bconf::verbose memeber to
propagate the same down to the subcommand.
Further the added helper function pr_verbose() helps to logs the verbose
messages, based on the state of the %bconf::verbose. And further HELPINFO_
defines are provided for the usage.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update the summary of 'fi usage' where the multiple profiles will be
listed by type, like:
Multiple profiles: yes (data, metadata)
The string is returned from btrfs_test_for_multiple_profiles so the
callers don't have to assemble it together from the other profile
strings.
Signed-off-by: David Sterba <dsterba@suse.com>
The warning header was printed always, even if there weren't multiple
block group profiles. This also fixes the mixed block group profile
detection.
Signed-off-by: David Sterba <dsterba@suse.com>
Use simpler output format for easier parsing and place each block group
type on a separate line.
Example output:
WARNING: Multiple block group profiles detected, see 'man btrfs(5)'.
WARNING: Data: single, raid1
Signed-off-by: David Sterba <dsterba@suse.com>
Move 'single' as the first in the list of the multiple block groups, as
it's the default block group and the simplest.
Example output:
WARNING: data -> [single, raid1], metadata -> [single], system -> [single]
WARNING: data+metadata -> [single], system -> [raid1]
Signed-off-by: David Sterba <dsterba@suse.com>
Simpify sprint_profiles so it does not take the output parameters
optionally and add stubs to btrfs_test_for_multiple_profiles_by_fd.
This allows to remove all conditionals and reduce parameters of
sprint_profiles so that the output is returned directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The term 'mixed' is confusing as it's commonly used for mised block
group profiles created by 'mkfs.btrfs --mixed'. We're interested in
multiple profiles for each type, so use the term 'multiple'.
Signed-off-by: David Sterba <dsterba@suse.com>
Add code to show a warning if a mixed profiles filesystem is detected.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: David Sterba <dsterba@suse.com>
When compiling with clang, this warning is shown:
common/utils.c:404:3: warning: declaration does not declare anything [-Wmissing-declarations]
__attribute__ ((fallthrough));
This attribute seems to silence the same warning in GCC. Changing this
attribute with /* fallthrough */ fixes the warning for both gcc and
clang.
Full support for the attribute will be in clang 10, gcc supports that
now. Let's use what works for both and switch to the attribute in the
future.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
