Add includes that let the header files compile or add explicit include
of kerncompat if the uXX types are used.
Signed-off-by: David Sterba <dsterba@suse.cz>
*Note*
this handles the problem under umounted state, the similar problem
under mounted state is already fixed by Anand.
Steps to reproduce:
# mkfs.btrfs -f /dev/sda1
# btrfstune -S 1 /dev/sda1
# mount /dev/sda1 /mnt
# btrfs dev add /dev/sda2 /mnt
# umount /mnt <== (umounted)
# btrfs fi show /dev/sda2
result:
Label: none uuid: XXXXXXXXXXXXXXXXXX
Total devices 2 FS bytes used 368.00KiB
devid 2 size 9.31GiB used 1.25GiB path /dev/sda2
*** Some devices missing
Btrfs v3.16-67-g69f54ea-dirty
It is because @btrfs_scan_lblkid() won't establish mappinig
between the seed and sprout devices. So seeding devices are missing.
We could use @open_ctree_* to detect all seed/sprout mappings
for each fs scanned after @btrfs_scan_lblkid().
sth worthes mention:
o If there are multi-level of seeds, all devices in them will be shown
in the ascending order of @devid
o If device replace is execed on a sprout fs with a device in a seed fs,
the replaced device still exist in the seed fs together with
the replacing device in the sprout fs, so we only keep the latest device
with the newest generation
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Btrfs-progs superblock checksum check is somewhat too restricted for
super-recover, since current btrfs-progs will only read the 1st
superblock and if you need super-recover the 1st superblock is
possibly already damaged.
The fix is introducing super_recover parameter for
btrfs_read_dev_super() and callers to allow scan backup superblocks if
needed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add more control to the balance behaviour.
Usage filter may not be finegrained enough and can lead to moving too
many chunks at once. Another example use is in connection with
drange+devid or vrange filters that allow to work with a specific chunk
or even with a chunk on a given device.
The limit filter applies last, the value of 0 means no limiting.
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: David Sterba <dsterba@suse.cz>
When a struct btrfs_fs_devices was being torn down by
btrfs_close_devices(), there was an invalidated pointer in the global
list fs_uuids which still pointed to it; if a device was closed and
then reopened (which btrfs-convert does), freed memory would be
accessed.
This was found using ThreadSanitizer (pretty much doing what
AddressSanitizer would, but not exiting after the first failure).
To reproduce, build with -fsanitize=thread and run 'make test'.
Representative output is below.
This change makes the current tests TSan-clean.
WARNING: ThreadSanitizer: heap-use-after-free (pid=29161)
Read of size 8 at 0x7d180000eee0 by main thread:
#0 memcmp ??:0
#1 find_fsid .../volumes.c:81
#2 device_list_add .../volumes.c:95
#3 btrfs_scan_one_device .../volumes.c:259
#4 btrfs_scan_fs_devices .../disk-io.c:1002
#5 __open_ctree_fd .../disk-io.c:1090
#6 open_ctree_fd .../disk-io.c:1191
#7 do_convert .../btrfs-convert.c:2317
#8 main .../btrfs-convert.c:2745
Previous write of size 8 at 0x7d180000eee0 by main thread:
#0 free ??:0
#1 btrfs_close_devices .../volumes.c:191
#2 close_ctree .../disk-io.c:1401
#3 do_convert .../btrfs-convert.c:2300
#4 main .../btrfs-convert.c:2745
Location is heap block of size 96 at 0x7d180000eee0 allocated by main thread:
#0 calloc ??:0 (exe+0x00000002acc6)
#1 device_list_add .../volumes.c:97
#2 btrfs_scan_one_device .../volumes.c:259
#3 btrfs_scan_fs_devices .../disk-io.c:1002
#4 __open_ctree_fd .../disk-io.c:1090
#5 open_ctree_fd .../disk-io.c:1191
#6 do_convert .../btrfs-convert.c:2256
#7 main .../btrfs-convert.c:2745
Signed-off-by: Adam Buchbinder <abuchbinder@google.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
a clean up patch, the BTRFS_STRIPE_LEN is been duplicated across
btrfs-progs, the kernel defines it in volume.h so do the same
for progs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
In files copied from the kernel, mark many functions as static,
and remove any resulting dead code.
Some functions are left unmarked if they aren't static in the
kernel tree.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This adds a 'btrfs-image -m' option, which let us restore an image that
is built from a btrfs of multiple disks onto several disks altogether.
This aims to address the following case,
$ mkfs.btrfs -m raid0 sda sdb
$ btrfs-image sda image.file
$ btrfs-image -r image.file sdc
---------
so we can only restore metadata onto sdc, and another thing is we can
only mount sdc with degraded mode as we don't provide informations of
another disk. And, it's built as RAID0 and we have only one disk,
so after mount sdc we'll get into readonly mode.
This is just annoying for people(like me) who're trying to restore image
but turn to find they cannot make it work.
So this'll make your life easier, just tap
$ btrfs-image -m image.file sdc sdd
---------
then you get everything about metadata done, the same offset with that of
the originals(of course, you need offer enough disk size, at least the disk
size of the original disks).
Besides, this also works with raid5 and raid6 metadata image.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Add chunk rebuild for RAID1/SINGLE/DUP to chunk-recover command.
Before this patch chunk-recover can only scan and reuse the old chunk
data to recover. With this patch, chunk-recover can use the reference
between chunk/block group/dev extent to rebuild the whole chunk tree
even when old chunks are not available.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Add chunk-recover program to check or rebuild chunk tree when the system
chunk array or chunk tree is broken.
Due to the importance of the system chunk array and chunk tree, if one of
them is broken, the whole btrfs will be broken even other data are OK.
But we have some hint(fsid, checksum...) to salvage the old metadata.
So this function will first scan the whole file system and collect the
needed data(chunk/block group/dev extent), and check for the references
between them. If the references are OK, the chunk tree can be rebuilt and
luckily the file system will be mountable.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
David Woodhouse originally contributed this code, and Chris Mason
changed it around to reflect the current design goals for raid56.
The original code expected all metadata and data writes to be full
stripes. This meant metadata block size == stripe size, and had a few
other restrictions.
This version allows metadata blocks smaller than the stripe size. It
implements both raid5 and raid6, although it does not have code to
rebuild from parity if one of the drives is missing or incorrect.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is the user mode part of the device replace patch series.
The command group "btrfs replace" is added with three commands:
- btrfs replace start srcdev|srcdevid targetdev [-Bfr] mount_point
- btrfs replace status mount_point [-1]
- btrfs replace cancel mount_point
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
This is mostly disabled, but it is step one in handling
corrupted block groups in the extent allocation tree.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Changes from V1 to V2:
- support extended attributes
- move btrfs_alloc_data_chunk function to volumes.c
- fix an execution error when additional useless parameters are specified
- fix traverse_directory function so that the insertion functions for the common items are invoked in a single point
The extended attributes is implemented through llistxattr and getxattr function calls.
Thanks
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch updates btrfs-progs for superblock duplication.
Note: I didn't make this patch as complete as the one for
kernel since updating the converter requires changing the
code again. Thank you,
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
This patch does the following:
1) Update device management code to match the kernel code.
2) Allocator fixes.
3) Add a program called btrfstune to set/clear the SEEDING
super block flags.
The main changes in this patch are adding chunk handing and data relocation
ability. In the last step of conversion, the converter relocates data in system
chunk and move chunk tree into system chunk. In the rollback process, the
converter remove chunk tree from system chunk and copy data back.
Regards
YZ
---
Block headers now store the chunk tree uuid
Chunk items records the device uuid for each stripes
Device extent items record better back refs to the chunk tree
Block groups record better back refs to the chunk tree
The chunk tree format has also changed. The objectid of BTRFS_CHUNK_ITEM_KEY
used to be the logical offset of the chunk. Now it is a chunk tree id,
with the logical offset being stored in the offset field of the key.
This allows a single chunk tree to record multiple logical address spaces,
upping the number of bytes indexed by a chunk tree from 2^64 to
2^128.
