btrfs-progs/utils.c

1810 lines
44 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007 Oracle. All rights reserved.
* Copyright (C) 2008 Morey Roof. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License v2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 021110-1307, USA.
*/
#define _XOPEN_SOURCE 700
#define __USE_XOPEN2K8
#define __XOPEN2K8 /* due to an error in dirent.h, to get dirfd() */
#define _GNU_SOURCE /* O_NOATIME */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
2008-03-25 03:04:49 +08:00
#ifndef __CHECKER__
#include <sys/ioctl.h>
#include <sys/mount.h>
#endif
#include <sys/types.h>
#include <sys/stat.h>
#include <uuid/uuid.h>
#include <dirent.h>
#include <fcntl.h>
#include <unistd.h>
#include <mntent.h>
#include <ctype.h>
#include <linux/loop.h>
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <limits.h>
#include <blkid/blkid.h>
#include "kerncompat.h"
#include "radix-tree.h"
#include "ctree.h"
#include "disk-io.h"
#include "transaction.h"
#include "crc32c.h"
#include "utils.h"
2008-03-25 03:04:49 +08:00
#include "volumes.h"
#include "ioctl.h"
2008-03-25 03:04:49 +08:00
#ifdef __CHECKER__
#define BLKGETSIZE64 0
static inline int ioctl(int fd, int define, u64 *size) { return 0; }
#endif
#ifndef BLKDISCARD
#define BLKDISCARD _IO(0x12,119)
#endif
static int
discard_blocks(int fd, u64 start, u64 len)
{
u64 range[2] = { start, len };
if (ioctl(fd, BLKDISCARD, &range) < 0)
return errno;
return 0;
}
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
static u64 reference_root_table[] = {
[1] = BTRFS_ROOT_TREE_OBJECTID,
[2] = BTRFS_EXTENT_TREE_OBJECTID,
[3] = BTRFS_CHUNK_TREE_OBJECTID,
[4] = BTRFS_DEV_TREE_OBJECTID,
[5] = BTRFS_FS_TREE_OBJECTID,
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
[6] = BTRFS_CSUM_TREE_OBJECTID,
};
int make_btrfs(int fd, const char *device, const char *label,
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
u64 blocks[7], u64 num_bytes, u32 nodesize,
u32 leafsize, u32 sectorsize, u32 stripesize)
{
struct btrfs_super_block super;
struct extent_buffer *buf;
struct btrfs_root_item root_item;
struct btrfs_disk_key disk_key;
struct btrfs_extent_item *extent_item;
struct btrfs_inode_item *inode_item;
struct btrfs_chunk *chunk;
struct btrfs_dev_item *dev_item;
struct btrfs_dev_extent *dev_extent;
u8 chunk_tree_uuid[BTRFS_UUID_SIZE];
u8 *ptr;
int i;
int ret;
u32 itemoff;
u32 nritems = 0;
u64 first_free;
u64 ref_root;
u32 array_size;
u32 item_size;
first_free = BTRFS_SUPER_INFO_OFFSET + sectorsize * 2 - 1;
first_free &= ~((u64)sectorsize - 1);
memset(&super, 0, sizeof(super));
num_bytes = (num_bytes / sectorsize) * sectorsize;
uuid_generate(super.fsid);
uuid_generate(super.dev_item.uuid);
uuid_generate(chunk_tree_uuid);
btrfs_set_super_bytenr(&super, blocks[0]);
2008-03-25 03:04:49 +08:00
btrfs_set_super_num_devices(&super, 1);
super.magic = cpu_to_le64(BTRFS_MAGIC);
btrfs_set_super_generation(&super, 1);
btrfs_set_super_root(&super, blocks[1]);
btrfs_set_super_chunk_root(&super, blocks[3]);
btrfs_set_super_total_bytes(&super, num_bytes);
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
btrfs_set_super_bytes_used(&super, 6 * leafsize);
btrfs_set_super_sectorsize(&super, sectorsize);
btrfs_set_super_leafsize(&super, leafsize);
btrfs_set_super_nodesize(&super, nodesize);
btrfs_set_super_stripesize(&super, stripesize);
btrfs_set_super_csum_type(&super, BTRFS_CSUM_TYPE_CRC32);
btrfs_set_super_chunk_root_generation(&super, 1);
btrfs_set_super_cache_generation(&super, -1);
if (label)
strncpy(super.label, label, BTRFS_LABEL_SIZE - 1);
buf = malloc(sizeof(*buf) + max(sectorsize, leafsize));
/* create the tree of root objects */
memset(buf->data, 0, leafsize);
buf->len = leafsize;
btrfs_set_header_bytenr(buf, blocks[1]);
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
btrfs_set_header_nritems(buf, 4);
btrfs_set_header_generation(buf, 1);
btrfs_set_header_backref_rev(buf, BTRFS_MIXED_BACKREF_REV);
btrfs_set_header_owner(buf, BTRFS_ROOT_TREE_OBJECTID);
write_extent_buffer(buf, super.fsid, (unsigned long)
btrfs_header_fsid(buf), BTRFS_FSID_SIZE);
write_extent_buffer(buf, chunk_tree_uuid, (unsigned long)
btrfs_header_chunk_tree_uuid(buf),
BTRFS_UUID_SIZE);
/* create the items for the root tree */
memset(&root_item, 0, sizeof(root_item));
inode_item = &root_item.inode;
btrfs_set_stack_inode_generation(inode_item, 1);
btrfs_set_stack_inode_size(inode_item, 3);
btrfs_set_stack_inode_nlink(inode_item, 1);
btrfs_set_stack_inode_nbytes(inode_item, leafsize);
btrfs_set_stack_inode_mode(inode_item, S_IFDIR | 0755);
btrfs_set_root_refs(&root_item, 1);
btrfs_set_root_used(&root_item, leafsize);
btrfs_set_root_generation(&root_item, 1);
memset(&disk_key, 0, sizeof(disk_key));
btrfs_set_disk_key_type(&disk_key, BTRFS_ROOT_ITEM_KEY);
btrfs_set_disk_key_offset(&disk_key, 0);
nritems = 0;
itemoff = __BTRFS_LEAF_DATA_SIZE(leafsize) - sizeof(root_item);
btrfs_set_root_bytenr(&root_item, blocks[2]);
btrfs_set_disk_key_objectid(&disk_key, BTRFS_EXTENT_TREE_OBJECTID);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems), itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems),
sizeof(root_item));
write_extent_buffer(buf, &root_item, btrfs_item_ptr_offset(buf,
nritems), sizeof(root_item));
nritems++;
itemoff = itemoff - sizeof(root_item);
btrfs_set_root_bytenr(&root_item, blocks[4]);
btrfs_set_disk_key_objectid(&disk_key, BTRFS_DEV_TREE_OBJECTID);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems), itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems),
sizeof(root_item));
write_extent_buffer(buf, &root_item,
btrfs_item_ptr_offset(buf, nritems),
sizeof(root_item));
nritems++;
itemoff = itemoff - sizeof(root_item);
btrfs_set_root_bytenr(&root_item, blocks[5]);
btrfs_set_disk_key_objectid(&disk_key, BTRFS_FS_TREE_OBJECTID);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems), itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems),
sizeof(root_item));
write_extent_buffer(buf, &root_item,
btrfs_item_ptr_offset(buf, nritems),
sizeof(root_item));
nritems++;
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
itemoff = itemoff - sizeof(root_item);
btrfs_set_root_bytenr(&root_item, blocks[6]);
btrfs_set_disk_key_objectid(&disk_key, BTRFS_CSUM_TREE_OBJECTID);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems), itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems),
sizeof(root_item));
write_extent_buffer(buf, &root_item,
btrfs_item_ptr_offset(buf, nritems),
sizeof(root_item));
nritems++;
csum_tree_block_size(buf, BTRFS_CRC32_SIZE, 0);
ret = pwrite(fd, buf->data, leafsize, blocks[1]);
BUG_ON(ret != leafsize);
/* create the items for the extent tree */
memset(buf->data+sizeof(struct btrfs_header), 0,
leafsize-sizeof(struct btrfs_header));
nritems = 0;
itemoff = __BTRFS_LEAF_DATA_SIZE(leafsize);
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
for (i = 1; i < 7; i++) {
BUG_ON(blocks[i] < first_free);
BUG_ON(blocks[i] < blocks[i - 1]);
/* create extent item */
itemoff -= sizeof(struct btrfs_extent_item) +
sizeof(struct btrfs_tree_block_info);
btrfs_set_disk_key_objectid(&disk_key, blocks[i]);
btrfs_set_disk_key_offset(&disk_key, leafsize);
btrfs_set_disk_key_type(&disk_key, BTRFS_EXTENT_ITEM_KEY);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems),
itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems),
sizeof(struct btrfs_extent_item) +
sizeof(struct btrfs_tree_block_info));
extent_item = btrfs_item_ptr(buf, nritems,
struct btrfs_extent_item);
btrfs_set_extent_refs(buf, extent_item, 1);
btrfs_set_extent_generation(buf, extent_item, 1);
btrfs_set_extent_flags(buf, extent_item,
BTRFS_EXTENT_FLAG_TREE_BLOCK);
nritems++;
/* create extent ref */
ref_root = reference_root_table[i];
btrfs_set_disk_key_objectid(&disk_key, blocks[i]);
btrfs_set_disk_key_offset(&disk_key, ref_root);
btrfs_set_disk_key_type(&disk_key, BTRFS_TREE_BLOCK_REF_KEY);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems),
itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems), 0);
nritems++;
}
btrfs_set_header_bytenr(buf, blocks[2]);
btrfs_set_header_owner(buf, BTRFS_EXTENT_TREE_OBJECTID);
btrfs_set_header_nritems(buf, nritems);
csum_tree_block_size(buf, BTRFS_CRC32_SIZE, 0);
ret = pwrite(fd, buf->data, leafsize, blocks[2]);
BUG_ON(ret != leafsize);
/* create the chunk tree */
memset(buf->data+sizeof(struct btrfs_header), 0,
leafsize-sizeof(struct btrfs_header));
nritems = 0;
item_size = sizeof(*dev_item);
itemoff = __BTRFS_LEAF_DATA_SIZE(leafsize) - item_size;
/* first device 1 (there is no device 0) */
btrfs_set_disk_key_objectid(&disk_key, BTRFS_DEV_ITEMS_OBJECTID);
btrfs_set_disk_key_offset(&disk_key, 1);
btrfs_set_disk_key_type(&disk_key, BTRFS_DEV_ITEM_KEY);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems), itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems), item_size);
dev_item = btrfs_item_ptr(buf, nritems, struct btrfs_dev_item);
btrfs_set_device_id(buf, dev_item, 1);
btrfs_set_device_generation(buf, dev_item, 0);
btrfs_set_device_total_bytes(buf, dev_item, num_bytes);
btrfs_set_device_bytes_used(buf, dev_item,
BTRFS_MKFS_SYSTEM_GROUP_SIZE);
btrfs_set_device_io_align(buf, dev_item, sectorsize);
btrfs_set_device_io_width(buf, dev_item, sectorsize);
btrfs_set_device_sector_size(buf, dev_item, sectorsize);
btrfs_set_device_type(buf, dev_item, 0);
write_extent_buffer(buf, super.dev_item.uuid,
(unsigned long)btrfs_device_uuid(dev_item),
BTRFS_UUID_SIZE);
write_extent_buffer(buf, super.fsid,
(unsigned long)btrfs_device_fsid(dev_item),
BTRFS_UUID_SIZE);
read_extent_buffer(buf, &super.dev_item, (unsigned long)dev_item,
sizeof(*dev_item));
nritems++;
item_size = btrfs_chunk_item_size(1);
itemoff = itemoff - item_size;
/* then we have chunk 0 */
btrfs_set_disk_key_objectid(&disk_key, BTRFS_FIRST_CHUNK_TREE_OBJECTID);
btrfs_set_disk_key_offset(&disk_key, 0);
btrfs_set_disk_key_type(&disk_key, BTRFS_CHUNK_ITEM_KEY);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems), itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems), item_size);
chunk = btrfs_item_ptr(buf, nritems, struct btrfs_chunk);
btrfs_set_chunk_length(buf, chunk, BTRFS_MKFS_SYSTEM_GROUP_SIZE);
btrfs_set_chunk_owner(buf, chunk, BTRFS_EXTENT_TREE_OBJECTID);
btrfs_set_chunk_stripe_len(buf, chunk, 64 * 1024);
btrfs_set_chunk_type(buf, chunk, BTRFS_BLOCK_GROUP_SYSTEM);
btrfs_set_chunk_io_align(buf, chunk, sectorsize);
btrfs_set_chunk_io_width(buf, chunk, sectorsize);
btrfs_set_chunk_sector_size(buf, chunk, sectorsize);
btrfs_set_chunk_num_stripes(buf, chunk, 1);
btrfs_set_stripe_devid_nr(buf, chunk, 0, 1);
btrfs_set_stripe_offset_nr(buf, chunk, 0, 0);
nritems++;
write_extent_buffer(buf, super.dev_item.uuid,
(unsigned long)btrfs_stripe_dev_uuid(&chunk->stripe),
BTRFS_UUID_SIZE);
/* copy the key for the chunk to the system array */
ptr = super.sys_chunk_array;
array_size = sizeof(disk_key);
memcpy(ptr, &disk_key, sizeof(disk_key));
ptr += sizeof(disk_key);
/* copy the chunk to the system array */
read_extent_buffer(buf, ptr, (unsigned long)chunk, item_size);
array_size += item_size;
ptr += item_size;
btrfs_set_super_sys_array_size(&super, array_size);
btrfs_set_header_bytenr(buf, blocks[3]);
btrfs_set_header_owner(buf, BTRFS_CHUNK_TREE_OBJECTID);
btrfs_set_header_nritems(buf, nritems);
csum_tree_block_size(buf, BTRFS_CRC32_SIZE, 0);
ret = pwrite(fd, buf->data, leafsize, blocks[3]);
/* create the device tree */
memset(buf->data+sizeof(struct btrfs_header), 0,
leafsize-sizeof(struct btrfs_header));
nritems = 0;
itemoff = __BTRFS_LEAF_DATA_SIZE(leafsize) -
sizeof(struct btrfs_dev_extent);
btrfs_set_disk_key_objectid(&disk_key, 1);
btrfs_set_disk_key_offset(&disk_key, 0);
btrfs_set_disk_key_type(&disk_key, BTRFS_DEV_EXTENT_KEY);
btrfs_set_item_key(buf, &disk_key, nritems);
btrfs_set_item_offset(buf, btrfs_item_nr(buf, nritems), itemoff);
btrfs_set_item_size(buf, btrfs_item_nr(buf, nritems),
sizeof(struct btrfs_dev_extent));
dev_extent = btrfs_item_ptr(buf, nritems, struct btrfs_dev_extent);
btrfs_set_dev_extent_chunk_tree(buf, dev_extent,
BTRFS_CHUNK_TREE_OBJECTID);
btrfs_set_dev_extent_chunk_objectid(buf, dev_extent,
BTRFS_FIRST_CHUNK_TREE_OBJECTID);
btrfs_set_dev_extent_chunk_offset(buf, dev_extent, 0);
write_extent_buffer(buf, chunk_tree_uuid,
(unsigned long)btrfs_dev_extent_chunk_tree_uuid(dev_extent),
BTRFS_UUID_SIZE);
btrfs_set_dev_extent_length(buf, dev_extent,
BTRFS_MKFS_SYSTEM_GROUP_SIZE);
nritems++;
btrfs_set_header_bytenr(buf, blocks[4]);
btrfs_set_header_owner(buf, BTRFS_DEV_TREE_OBJECTID);
btrfs_set_header_nritems(buf, nritems);
csum_tree_block_size(buf, BTRFS_CRC32_SIZE, 0);
ret = pwrite(fd, buf->data, leafsize, blocks[4]);
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
/* create the FS root */
memset(buf->data+sizeof(struct btrfs_header), 0,
leafsize-sizeof(struct btrfs_header));
btrfs_set_header_bytenr(buf, blocks[5]);
btrfs_set_header_owner(buf, BTRFS_FS_TREE_OBJECTID);
btrfs_set_header_nritems(buf, 0);
csum_tree_block_size(buf, BTRFS_CRC32_SIZE, 0);
ret = pwrite(fd, buf->data, leafsize, blocks[5]);
BUG_ON(ret != leafsize);
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
/* finally create the csum root */
memset(buf->data+sizeof(struct btrfs_header), 0,
leafsize-sizeof(struct btrfs_header));
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-09 06:00:31 +08:00
btrfs_set_header_bytenr(buf, blocks[6]);
btrfs_set_header_owner(buf, BTRFS_CSUM_TREE_OBJECTID);
btrfs_set_header_nritems(buf, 0);
csum_tree_block_size(buf, BTRFS_CRC32_SIZE, 0);
ret = pwrite(fd, buf->data, leafsize, blocks[6]);
BUG_ON(ret != leafsize);
/* and write out the super block */
BUG_ON(sizeof(super) > sectorsize);
memset(buf->data, 0, sectorsize);
memcpy(buf->data, &super, sizeof(super));
buf->len = sectorsize;
csum_tree_block_size(buf, BTRFS_CRC32_SIZE, 0);
ret = pwrite(fd, buf->data, sectorsize, blocks[0]);
BUG_ON(ret != sectorsize);
free(buf);
return 0;
}
u64 btrfs_device_size(int fd, struct stat *st)
2008-03-25 03:04:49 +08:00
{
u64 size;
if (S_ISREG(st->st_mode)) {
return st->st_size;
}
if (!S_ISBLK(st->st_mode)) {
return 0;
}
if (ioctl(fd, BLKGETSIZE64, &size) >= 0) {
return size;
}
return 0;
}
static int zero_blocks(int fd, off_t start, size_t len)
{
char *buf = malloc(len);
int ret = 0;
ssize_t written;
if (!buf)
return -ENOMEM;
memset(buf, 0, len);
written = pwrite(fd, buf, len, start);
if (written != len)
ret = -EIO;
free(buf);
return ret;
}
static int zero_dev_start(int fd)
{
off_t start = 0;
size_t len = 2 * 1024 * 1024;
#ifdef __sparc__
/* don't overwrite the disk labels on sparc */
start = 1024;
len -= 1024;
#endif
return zero_blocks(fd, start, len);
}
static int zero_dev_end(int fd, u64 dev_size)
{
size_t len = 2 * 1024 * 1024;
off_t start = dev_size - len;
return zero_blocks(fd, start, len);
}
int btrfs_add_to_fsid(struct btrfs_trans_handle *trans,
struct btrfs_root *root, int fd, char *path,
u64 block_count, u32 io_width, u32 io_align,
u32 sectorsize)
2008-03-25 03:04:49 +08:00
{
struct btrfs_super_block *disk_super;
struct btrfs_super_block *super = root->fs_info->super_copy;
struct btrfs_device *device;
2008-03-25 03:04:49 +08:00
struct btrfs_dev_item *dev_item;
char *buf;
u64 total_bytes;
u64 num_devs;
int ret;
device = kmalloc(sizeof(*device), GFP_NOFS);
if (!device)
return -ENOMEM;
buf = kmalloc(sectorsize, GFP_NOFS);
if (!buf) {
kfree(device);
return -ENOMEM;
}
2008-03-25 03:04:49 +08:00
BUG_ON(sizeof(*disk_super) > sectorsize);
memset(buf, 0, sectorsize);
disk_super = (struct btrfs_super_block *)buf;
dev_item = &disk_super->dev_item;
uuid_generate(device->uuid);
device->devid = 0;
device->type = 0;
device->io_width = io_width;
device->io_align = io_align;
device->sector_size = sectorsize;
device->fd = fd;
device->writeable = 1;
device->total_bytes = block_count;
device->bytes_used = 0;
device->total_ios = 0;
device->dev_root = root->fs_info->dev_root;
ret = btrfs_add_device(trans, root, device);
2008-03-25 03:04:49 +08:00
BUG_ON(ret);
total_bytes = btrfs_super_total_bytes(super) + block_count;
btrfs_set_super_total_bytes(super, total_bytes);
num_devs = btrfs_super_num_devices(super) + 1;
btrfs_set_super_num_devices(super, num_devs);
memcpy(disk_super, super, sizeof(*disk_super));
printf("adding device %s id %llu\n", path,
(unsigned long long)device->devid);
btrfs_set_super_bytenr(disk_super, BTRFS_SUPER_INFO_OFFSET);
btrfs_set_stack_device_id(dev_item, device->devid);
btrfs_set_stack_device_type(dev_item, device->type);
btrfs_set_stack_device_io_align(dev_item, device->io_align);
btrfs_set_stack_device_io_width(dev_item, device->io_width);
btrfs_set_stack_device_sector_size(dev_item, device->sector_size);
btrfs_set_stack_device_total_bytes(dev_item, device->total_bytes);
btrfs_set_stack_device_bytes_used(dev_item, device->bytes_used);
memcpy(&dev_item->uuid, device->uuid, BTRFS_UUID_SIZE);
2008-03-25 03:04:49 +08:00
ret = pwrite(fd, buf, sectorsize, BTRFS_SUPER_INFO_OFFSET);
BUG_ON(ret != sectorsize);
kfree(buf);
list_add(&device->dev_list, &root->fs_info->fs_devices->devices);
device->fs_devices = root->fs_info->fs_devices;
2008-03-25 03:04:49 +08:00
return 0;
}
int btrfs_prepare_device(int fd, char *file, int zero_end, u64 *block_count_ret,
u64 max_block_count, int *mixed, int nodiscard)
2008-03-25 03:04:49 +08:00
{
u64 block_count;
u64 bytenr;
2008-03-25 03:04:49 +08:00
struct stat st;
int i, ret;
2008-03-25 03:04:49 +08:00
ret = fstat(fd, &st);
if (ret < 0) {
fprintf(stderr, "unable to stat %s\n", file);
exit(1);
}
block_count = btrfs_device_size(fd, &st);
2008-03-25 03:04:49 +08:00
if (block_count == 0) {
fprintf(stderr, "unable to find %s size\n", file);
exit(1);
}
if (max_block_count)
block_count = min(block_count, max_block_count);
2008-03-25 03:04:49 +08:00
zero_end = 1;
if (block_count < 1024 * 1024 * 1024 && !(*mixed)) {
printf("SMALL VOLUME: forcing mixed metadata/data groups\n");
*mixed = 1;
2008-03-25 03:04:49 +08:00
}
if (!nodiscard) {
/*
* We intentionally ignore errors from the discard ioctl. It is
* not necessary for the mkfs functionality but just an optimization.
*/
discard_blocks(fd, 0, block_count);
}
2008-03-25 03:04:49 +08:00
ret = zero_dev_start(fd);
if (ret) {
fprintf(stderr, "failed to zero device start %d\n", ret);
exit(1);
}
for (i = 0 ; i < BTRFS_SUPER_MIRROR_MAX; i++) {
bytenr = btrfs_sb_offset(i);
if (bytenr >= block_count)
break;
zero_blocks(fd, bytenr, BTRFS_SUPER_INFO_SIZE);
}
2008-03-25 03:04:49 +08:00
if (zero_end) {
ret = zero_dev_end(fd, block_count);
if (ret) {
fprintf(stderr, "failed to zero device end %d\n", ret);
exit(1);
}
}
*block_count_ret = block_count;
return 0;
}
int btrfs_make_root_dir(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 objectid)
{
int ret;
struct btrfs_inode_item inode_item;
time_t now = time(NULL);
memset(&inode_item, 0, sizeof(inode_item));
btrfs_set_stack_inode_generation(&inode_item, trans->transid);
btrfs_set_stack_inode_size(&inode_item, 0);
btrfs_set_stack_inode_nlink(&inode_item, 1);
btrfs_set_stack_inode_nbytes(&inode_item, root->leafsize);
btrfs_set_stack_inode_mode(&inode_item, S_IFDIR | 0755);
btrfs_set_stack_timespec_sec(&inode_item.atime, now);
btrfs_set_stack_timespec_nsec(&inode_item.atime, 0);
btrfs_set_stack_timespec_sec(&inode_item.ctime, now);
btrfs_set_stack_timespec_nsec(&inode_item.ctime, 0);
btrfs_set_stack_timespec_sec(&inode_item.mtime, now);
btrfs_set_stack_timespec_nsec(&inode_item.mtime, 0);
btrfs_set_stack_timespec_sec(&inode_item.otime, 0);
btrfs_set_stack_timespec_nsec(&inode_item.otime, 0);
if (root->fs_info->tree_root == root)
btrfs_set_super_root_dir(root->fs_info->super_copy, objectid);
ret = btrfs_insert_inode(trans, root, objectid, &inode_item);
if (ret)
goto error;
2008-07-25 00:13:32 +08:00
ret = btrfs_insert_inode_ref(trans, root, "..", 2, objectid, objectid, 0);
if (ret)
goto error;
btrfs_set_root_dirid(&root->root_item, objectid);
ret = 0;
error:
return ret;
}
/*
* checks if a path is a block device node
* Returns negative errno on failure, otherwise
* returns 1 for blockdev, 0 for not-blockdev
*/
int is_block_device(const char *path) {
struct stat statbuf;
if (stat(path, &statbuf) < 0)
return -errno;
return S_ISBLK(statbuf.st_mode);
}
/*
* Find the mount point for a mounted device.
* On success, returns 0 with mountpoint in *mp.
* On failure, returns -errno (not mounted yields -EINVAL)
* Is noisy on failures, expects to be given a mounted device.
*/
int get_btrfs_mount(const char *dev, char *mp, size_t mp_size) {
int ret;
int fd = -1;
ret = is_block_device(dev);
if (ret <= 0) {
if (!ret) {
fprintf(stderr, "%s is not a block device\n", dev);
ret = -EINVAL;
} else {
fprintf(stderr, "Could not check %s: %s\n",
dev, strerror(-ret));
}
goto out;
}
fd = open(dev, O_RDONLY);
if (fd < 0) {
ret = -errno;
fprintf(stderr, "Could not open %s: %s\n", dev, strerror(errno));
goto out;
}
ret = check_mounted_where(fd, dev, mp, mp_size, NULL);
if (!ret) {
fprintf(stderr, "%s is not a mounted btrfs device\n", dev);
ret = -EINVAL;
} else { /* mounted, all good */
ret = 0;
}
out:
if (fd != -1)
close(fd);
if (ret)
fprintf(stderr, "Could not get mountpoint for %s\n", dev);
return ret;
}
/*
* Given a pathname, return a filehandle to:
* the original pathname or,
* if the pathname is a mounted btrfs device, to its mountpoint.
*
* On error, return -1, errno should be set.
*/
int open_path_or_dev_mnt(const char *path)
{
char mp[BTRFS_PATH_NAME_MAX + 1];
int fdmnt;
if (is_block_device(path)) {
int ret;
ret = get_btrfs_mount(path, mp, sizeof(mp));
if (ret < 0) {
/* not a mounted btrfs dev */
errno = EINVAL;
return -1;
}
fdmnt = open_file_or_dir(mp);
} else {
fdmnt = open_file_or_dir(path);
}
return fdmnt;
}
/* checks if a device is a loop device */
int is_loop_device (const char* device) {
struct stat statbuf;
if(stat(device, &statbuf) < 0)
return -errno;
return (S_ISBLK(statbuf.st_mode) &&
MAJOR(statbuf.st_rdev) == LOOP_MAJOR);
}
/* Takes a loop device path (e.g. /dev/loop0) and returns
* the associated file (e.g. /images/my_btrfs.img) */
int resolve_loop_device(const char* loop_dev, char* loop_file, int max_len)
{
int ret;
FILE *f;
char fmt[20];
char p[PATH_MAX];
char real_loop_dev[PATH_MAX];
if (!realpath(loop_dev, real_loop_dev))
return -errno;
snprintf(p, PATH_MAX, "/sys/block/%s/loop/backing_file", strrchr(real_loop_dev, '/'));
if (!(f = fopen(p, "r")))
return -errno;
snprintf(fmt, 20, "%%%i[^\n]", max_len-1);
ret = fscanf(f, fmt, loop_file);
fclose(f);
if (ret == EOF)
return -errno;
return 0;
}
/* Checks whether a and b are identical or device
* files associated with the same block device
*/
int is_same_blk_file(const char* a, const char* b)
{
struct stat st_buf_a, st_buf_b;
char real_a[PATH_MAX];
char real_b[PATH_MAX];
if(!realpath(a, real_a) ||
!realpath(b, real_b))
{
return -errno;
}
/* Identical path? */
if(strcmp(real_a, real_b) == 0)
return 1;
if(stat(a, &st_buf_a) < 0 ||
stat(b, &st_buf_b) < 0)
{
if (errno == ENOENT)
return 0;
return -errno;
}
/* Same blockdevice? */
if(S_ISBLK(st_buf_a.st_mode) &&
S_ISBLK(st_buf_b.st_mode) &&
st_buf_a.st_rdev == st_buf_b.st_rdev)
{
return 1;
}
/* Hardlink? */
if (st_buf_a.st_dev == st_buf_b.st_dev &&
st_buf_a.st_ino == st_buf_b.st_ino)
{
return 1;
}
return 0;
}
/* checks if a and b are identical or device
* files associated with the same block device or
* if one file is a loop device that uses the other
* file.
*/
int is_same_loop_file(const char* a, const char* b)
{
char res_a[PATH_MAX];
char res_b[PATH_MAX];
const char* final_a;
const char* final_b;
int ret;
/* Resolve a if it is a loop device */
if((ret = is_loop_device(a)) < 0) {
if (ret == -ENOENT)
return 0;
return ret;
} else if (ret) {
if ((ret = resolve_loop_device(a, res_a, sizeof(res_a))) < 0)
return ret;
final_a = res_a;
} else {
final_a = a;
}
/* Resolve b if it is a loop device */
if ((ret = is_loop_device(b)) < 0) {
if (ret == -ENOENT)
return 0;
return ret;
} else if (ret) {
if((ret = resolve_loop_device(b, res_b, sizeof(res_b))) < 0)
return ret;
final_b = res_b;
} else {
final_b = b;
}
return is_same_blk_file(final_a, final_b);
}
/* Checks if a file exists and is a block or regular file*/
int is_existing_blk_or_reg_file(const char* filename)
{
struct stat st_buf;
if(stat(filename, &st_buf) < 0) {
if(errno == ENOENT)
return 0;
else
return -errno;
}
return (S_ISBLK(st_buf.st_mode) || S_ISREG(st_buf.st_mode));
}
/* Checks if a file is used (directly or indirectly via a loop device)
* by a device in fs_devices
*/
int blk_file_in_dev_list(struct btrfs_fs_devices* fs_devices, const char* file)
{
int ret;
struct list_head *head;
struct list_head *cur;
struct btrfs_device *device;
head = &fs_devices->devices;
list_for_each(cur, head) {
device = list_entry(cur, struct btrfs_device, dev_list);
if((ret = is_same_loop_file(device->name, file)))
return ret;
}
return 0;
}
/*
* returns 1 if the device was mounted, < 0 on error or 0 if everything
* is safe to continue.
*/
int check_mounted(const char* file)
{
int fd;
int ret;
fd = open(file, O_RDONLY);
if (fd < 0) {
fprintf (stderr, "check_mounted(): Could not open %s\n", file);
return -errno;
}
ret = check_mounted_where(fd, file, NULL, 0, NULL);
close(fd);
return ret;
}
int check_mounted_where(int fd, const char *file, char *where, int size,
struct btrfs_fs_devices **fs_dev_ret)
{
int ret;
u64 total_devs = 1;
int is_btrfs;
struct btrfs_fs_devices *fs_devices_mnt = NULL;
FILE *f;
struct mntent *mnt;
/* scan the initial device */
ret = btrfs_scan_one_device(fd, file, &fs_devices_mnt,
&total_devs, BTRFS_SUPER_INFO_OFFSET);
is_btrfs = (ret >= 0);
/* scan other devices */
if (is_btrfs && total_devs > 1) {
if((ret = btrfs_scan_for_fsid(fs_devices_mnt, total_devs, 1)))
return ret;
}
/* iterate over the list of currently mountes filesystems */
if ((f = setmntent ("/proc/mounts", "r")) == NULL)
return -errno;
while ((mnt = getmntent (f)) != NULL) {
if(is_btrfs) {
if(strcmp(mnt->mnt_type, "btrfs") != 0)
continue;
ret = blk_file_in_dev_list(fs_devices_mnt, mnt->mnt_fsname);
} else {
/* ignore entries in the mount table that are not
associated with a file*/
if((ret = is_existing_blk_or_reg_file(mnt->mnt_fsname)) < 0)
goto out_mntloop_err;
else if(!ret)
continue;
ret = is_same_loop_file(file, mnt->mnt_fsname);
}
if(ret < 0)
goto out_mntloop_err;
else if(ret)
break;
}
/* Did we find an entry in mnt table? */
if (mnt && size && where) {
strncpy(where, mnt->mnt_dir, size);
where[size-1] = 0;
}
if (fs_dev_ret)
*fs_dev_ret = fs_devices_mnt;
ret = (mnt != NULL);
out_mntloop_err:
endmntent (f);
return ret;
}
struct pending_dir {
struct list_head list;
char name[PATH_MAX];
};
void btrfs_register_one_device(char *fname)
{
struct btrfs_ioctl_vol_args args;
int fd;
int ret;
int e;
fd = open("/dev/btrfs-control", O_RDONLY);
if (fd < 0) {
fprintf(stderr, "failed to open /dev/btrfs-control "
"skipping device registration: %s\n",
strerror(errno));
return;
}
strncpy(args.name, fname, BTRFS_PATH_NAME_MAX);
args.name[BTRFS_PATH_NAME_MAX-1] = 0;
ret = ioctl(fd, BTRFS_IOC_SCAN_DEV, &args);
e = errno;
if(ret<0){
fprintf(stderr, "ERROR: device scan failed '%s' - %s\n",
fname, strerror(e));
}
close(fd);
}
int btrfs_scan_one_dir(char *dirname, int run_ioctl)
{
DIR *dirp = NULL;
struct dirent *dirent;
struct pending_dir *pending;
struct stat st;
int ret;
int fd;
int dirname_len;
char *fullpath;
struct list_head pending_list;
struct btrfs_fs_devices *tmp_devices;
u64 num_devices;
INIT_LIST_HEAD(&pending_list);
pending = malloc(sizeof(*pending));
if (!pending)
return -ENOMEM;
strcpy(pending->name, dirname);
again:
dirname_len = strlen(pending->name);
fullpath = malloc(PATH_MAX);
dirname = pending->name;
if (!fullpath) {
ret = -ENOMEM;
goto fail;
}
dirp = opendir(dirname);
if (!dirp) {
fprintf(stderr, "Unable to open %s for scanning\n", dirname);
free(fullpath);
return -ENOENT;
}
while(1) {
dirent = readdir(dirp);
if (!dirent)
break;
if (dirent->d_name[0] == '.')
continue;
if (dirname_len + strlen(dirent->d_name) + 2 > PATH_MAX) {
ret = -EFAULT;
goto fail;
}
snprintf(fullpath, PATH_MAX, "%s/%s", dirname, dirent->d_name);
ret = lstat(fullpath, &st);
if (ret < 0) {
fprintf(stderr, "failed to stat %s\n", fullpath);
continue;
}
if (S_ISLNK(st.st_mode))
continue;
if (S_ISDIR(st.st_mode)) {
struct pending_dir *next = malloc(sizeof(*next));
if (!next) {
ret = -ENOMEM;
goto fail;
}
strcpy(next->name, fullpath);
list_add_tail(&next->list, &pending_list);
}
if (!S_ISBLK(st.st_mode)) {
continue;
}
fd = open(fullpath, O_RDONLY);
if (fd < 0) {
/* ignore the following errors:
ENXIO (device don't exists)
ENOMEDIUM (No medium found ->
like a cd tray empty)
*/
if(errno != ENXIO && errno != ENOMEDIUM)
fprintf(stderr, "failed to read %s: %s\n",
fullpath, strerror(errno));
continue;
}
ret = btrfs_scan_one_device(fd, fullpath, &tmp_devices,
&num_devices,
BTRFS_SUPER_INFO_OFFSET);
if (ret == 0 && run_ioctl > 0) {
btrfs_register_one_device(fullpath);
}
close(fd);
}
if (!list_empty(&pending_list)) {
free(pending);
pending = list_entry(pending_list.next, struct pending_dir,
list);
free(fullpath);
list_del(&pending->list);
closedir(dirp);
dirp = NULL;
goto again;
}
ret = 0;
fail:
free(pending);
free(fullpath);
if (dirp)
closedir(dirp);
return ret;
}
int btrfs_scan_for_fsid(struct btrfs_fs_devices *fs_devices, u64 total_devs,
int run_ioctls)
{
int ret;
ret = btrfs_scan_block_devices(run_ioctls);
if (ret)
ret = btrfs_scan_one_dir("/dev", run_ioctls);
return ret;
}
int btrfs_device_already_in_root(struct btrfs_root *root, int fd,
int super_offset)
{
struct btrfs_super_block *disk_super;
char *buf;
int ret = 0;
buf = malloc(BTRFS_SUPER_INFO_SIZE);
if (!buf) {
ret = -ENOMEM;
goto out;
}
ret = pread(fd, buf, BTRFS_SUPER_INFO_SIZE, super_offset);
if (ret != BTRFS_SUPER_INFO_SIZE)
goto brelse;
ret = 0;
disk_super = (struct btrfs_super_block *)buf;
if (disk_super->magic != cpu_to_le64(BTRFS_MAGIC))
goto brelse;
if (!memcmp(disk_super->fsid, root->fs_info->super_copy->fsid,
BTRFS_FSID_SIZE))
ret = 1;
brelse:
free(buf);
out:
return ret;
}
static char *size_strs[] = { "", "KB", "MB", "GB", "TB",
"PB", "EB", "ZB", "YB"};
char *pretty_sizes(u64 size)
{
int num_divs = 0;
int pretty_len = 16;
float fraction;
char *pretty;
if( size < 1024 ){
fraction = size;
num_divs = 0;
} else {
u64 last_size = size;
num_divs = 0;
while(size >= 1024){
last_size = size;
size /= 1024;
num_divs ++;
}
if (num_divs >= ARRAY_SIZE(size_strs))
return NULL;
fraction = (float)last_size / 1024;
}
pretty = malloc(pretty_len);
snprintf(pretty, pretty_len, "%.2f%s", fraction, size_strs[num_divs]);
return pretty;
}
/*
* __strncpy__null - strncpy with null termination
* @dest: the target array
* @src: the source string
* @n: maximum bytes to copy (size of *dest)
*
* Like strncpy, but ensures destination is null-terminated.
*
* Copies the string pointed to by src, including the terminating null
* byte ('\0'), to the buffer pointed to by dest, up to a maximum
* of n bytes. Then ensure that dest is null-terminated.
*/
char *__strncpy__null(char *dest, const char *src, size_t n)
{
strncpy(dest, src, n);
if (n > 0)
dest[n - 1] = '\0';
return dest;
}
/*
* Checks to make sure that the label matches our requirements.
* Returns:
0 if everything is safe and usable
-1 if the label is too long
*/
static int check_label(const char *input)
{
int len = strlen(input);
if (len > BTRFS_LABEL_SIZE - 1) {
fprintf(stderr, "ERROR: Label %s is too long (max %d)\n",
input, BTRFS_LABEL_SIZE - 1);
return -1;
}
return 0;
}
static int set_label_unmounted(const char *dev, const char *label)
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root;
int ret;
ret = check_mounted(dev);
if (ret < 0) {
fprintf(stderr, "FATAL: error checking %s mount status\n", dev);
return -1;
}
if (ret > 0) {
fprintf(stderr, "ERROR: dev %s is mounted, use mount point\n",
dev);
return -1;
}
/* Open the super_block at the default location
* and as read-write.
*/
root = open_ctree(dev, 0, 1);
if (!root) /* errors are printed by open_ctree() */
return -1;
trans = btrfs_start_transaction(root, 1);
snprintf(root->fs_info->super_copy->label, BTRFS_LABEL_SIZE, "%s",
label);
btrfs_commit_transaction(trans, root);
/* Now we close it since we are done. */
close_ctree(root);
return 0;
}
static int set_label_mounted(const char *mount_path, const char *label)
{
int fd;
fd = open(mount_path, O_RDONLY | O_NOATIME);
if (fd < 0) {
fprintf(stderr, "ERROR: unable access to '%s'\n", mount_path);
return -1;
}
if (ioctl(fd, BTRFS_IOC_SET_FSLABEL, label) < 0) {
fprintf(stderr, "ERROR: unable to set label %s\n",
strerror(errno));
close(fd);
return -1;
}
close(fd);
return 0;
}
static int get_label_unmounted(const char *dev)
{
struct btrfs_root *root;
int ret;
ret = check_mounted(dev);
if (ret < 0) {
fprintf(stderr, "FATAL: error checking %s mount status\n", dev);
return -1;
}
if (ret > 0) {
fprintf(stderr, "ERROR: dev %s is mounted, use mount point\n",
dev);
return -1;
}
/* Open the super_block at the default location
* and as read-only.
*/
root = open_ctree(dev, 0, 0);
if(!root)
return -1;
fprintf(stdout, "%s\n", root->fs_info->super_copy->label);
/* Now we close it since we are done. */
close_ctree(root);
return 0;
}
/*
* If a partition is mounted, try to get the filesystem label via its
* mounted path rather than device. Return the corresponding error
* the user specified the device path.
*/
static int get_label_mounted(const char *mount_path)
{
char label[BTRFS_LABEL_SIZE];
int fd;
fd = open(mount_path, O_RDONLY | O_NOATIME);
if (fd < 0) {
fprintf(stderr, "ERROR: unable access to '%s'\n", mount_path);
return -1;
}
memset(label, '\0', sizeof(label));
if (ioctl(fd, BTRFS_IOC_GET_FSLABEL, label) < 0) {
fprintf(stderr, "ERROR: unable get label %s\n", strerror(errno));
close(fd);
return -1;
}
fprintf(stdout, "%s\n", label);
close(fd);
return 0;
}
int get_label(const char *btrfs_dev)
{
return is_existing_blk_or_reg_file(btrfs_dev) ?
get_label_unmounted(btrfs_dev) :
get_label_mounted(btrfs_dev);
}
int set_label(const char *btrfs_dev, const char *label)
{
if (check_label(label))
return -1;
return is_existing_blk_or_reg_file(btrfs_dev) ?
set_label_unmounted(btrfs_dev, label) :
set_label_mounted(btrfs_dev, label);
}
int btrfs_scan_block_devices(int run_ioctl)
{
struct stat st;
int ret;
int fd;
struct btrfs_fs_devices *tmp_devices;
u64 num_devices;
FILE *proc_partitions;
int i;
char buf[1024];
char fullpath[110];
int scans = 0;
int special;
scan_again:
proc_partitions = fopen("/proc/partitions","r");
if (!proc_partitions) {
fprintf(stderr, "Unable to open '/proc/partitions' for scanning\n");
return -ENOENT;
}
/* skip the header */
for (i = 0; i < 2; i++)
if (!fgets(buf, 1023, proc_partitions)) {
fprintf(stderr,
"Unable to read '/proc/partitions' for scanning\n");
fclose(proc_partitions);
return -ENOENT;
}
strcpy(fullpath,"/dev/");
while(fgets(buf, 1023, proc_partitions)) {
i = sscanf(buf," %*d %*d %*d %99s", fullpath+5);
/*
* multipath and MD devices may register as a btrfs filesystem
* both through the original block device and through
* the special (/dev/mapper or /dev/mdX) entry.
* This scans the special entries last
*/
special = strncmp(fullpath, "/dev/dm-", strlen("/dev/dm-")) == 0;
if (!special)
special = strncmp(fullpath, "/dev/md", strlen("/dev/md")) == 0;
if (scans == 0 && special)
continue;
if (scans > 0 && !special)
continue;
ret = lstat(fullpath, &st);
if (ret < 0) {
fprintf(stderr, "failed to stat %s\n", fullpath);
continue;
}
if (!S_ISBLK(st.st_mode)) {
continue;
}
fd = open(fullpath, O_RDONLY);
if (fd < 0) {
fprintf(stderr, "failed to open %s: %s\n",
fullpath, strerror(errno));
continue;
}
ret = btrfs_scan_one_device(fd, fullpath, &tmp_devices,
&num_devices,
BTRFS_SUPER_INFO_OFFSET);
if (ret == 0 && run_ioctl > 0) {
btrfs_register_one_device(fullpath);
}
close(fd);
}
fclose(proc_partitions);
if (scans == 0) {
scans++;
goto scan_again;
}
return 0;
}
u64 parse_size(char *s)
{
int i;
char c;
u64 mult = 1;
for (i = 0; s && s[i] && isdigit(s[i]); i++) ;
if (!i) {
fprintf(stderr, "ERROR: size value is empty\n");
exit(50);
}
if (s[i]) {
c = tolower(s[i]);
switch (c) {
case 'e':
mult *= 1024;
case 'p':
mult *= 1024;
case 't':
mult *= 1024;
case 'g':
mult *= 1024;
case 'm':
mult *= 1024;
case 'k':
mult *= 1024;
case 'b':
break;
default:
fprintf(stderr, "ERROR: Unknown size descriptor "
"'%c'\n", c);
exit(1);
}
}
if (s[i] && s[i+1]) {
fprintf(stderr, "ERROR: Illegal suffix contains "
"character '%c' in wrong position\n",
s[i+1]);
exit(51);
}
return strtoull(s, NULL, 10) * mult;
}
int open_file_or_dir(const char *fname)
{
int ret;
struct stat st;
DIR *dirstream;
int fd;
ret = stat(fname, &st);
if (ret < 0) {
return -1;
}
if (S_ISDIR(st.st_mode)) {
dirstream = opendir(fname);
if (!dirstream) {
return -2;
}
fd = dirfd(dirstream);
} else {
fd = open(fname, O_RDWR);
}
if (fd < 0) {
return -3;
}
return fd;
}
int get_device_info(int fd, u64 devid,
struct btrfs_ioctl_dev_info_args *di_args)
{
int ret;
di_args->devid = devid;
memset(&di_args->uuid, '\0', sizeof(di_args->uuid));
ret = ioctl(fd, BTRFS_IOC_DEV_INFO, di_args);
return ret ? -errno : 0;
}
/*
* For a given path, fill in the ioctl fs_ and info_ args.
* If the path is a btrfs mountpoint, fill info for all devices.
* If the path is a btrfs device, fill in only that device.
*
* The path provided must be either on a mounted btrfs fs,
* or be a mounted btrfs device.
*
* Returns 0 on success, or a negative errno.
*/
int get_fs_info(char *path, struct btrfs_ioctl_fs_info_args *fi_args,
struct btrfs_ioctl_dev_info_args **di_ret)
{
int fd = -1;
int ret = 0;
int ndevs = 0;
int i = 1;
struct btrfs_fs_devices *fs_devices_mnt = NULL;
struct btrfs_ioctl_dev_info_args *di_args;
char mp[BTRFS_PATH_NAME_MAX + 1];
memset(fi_args, 0, sizeof(*fi_args));
if (is_block_device(path)) {
/* Ensure it's mounted, then set path to the mountpoint */
fd = open(path, O_RDONLY);
if (fd < 0) {
ret = -errno;
fprintf(stderr, "Couldn't open %s: %s\n",
path, strerror(errno));
goto out;
}
ret = check_mounted_where(fd, path, mp, sizeof(mp),
&fs_devices_mnt);
if (!ret) {
ret = -EINVAL;
goto out;
}
if (ret < 0)
goto out;
path = mp;
/* Only fill in this one device */
fi_args->num_devices = 1;
fi_args->max_id = fs_devices_mnt->latest_devid;
i = fs_devices_mnt->latest_devid;
memcpy(fi_args->fsid, fs_devices_mnt->fsid, BTRFS_FSID_SIZE);
close(fd);
}
/* at this point path must not be for a block device */
fd = open_file_or_dir(path);
if (fd < 0) {
ret = -errno;
goto out;
}
/* fill in fi_args if not just a single device */
if (fi_args->num_devices != 1) {
ret = ioctl(fd, BTRFS_IOC_FS_INFO, fi_args);
if (ret < 0) {
ret = -errno;
goto out;
}
}
if (!fi_args->num_devices)
goto out;
di_args = *di_ret = malloc(fi_args->num_devices * sizeof(*di_args));
if (!di_args) {
ret = -errno;
goto out;
}
for (; i <= fi_args->max_id; ++i) {
BUG_ON(ndevs >= fi_args->num_devices);
ret = get_device_info(fd, i, &di_args[ndevs]);
if (ret == -ENODEV)
continue;
if (ret)
goto out;
ndevs++;
}
BUG_ON(ndevs == 0);
ret = 0;
out:
if (fd != -1)
close(fd);
return ret;
}
#define isoctal(c) (((c) & ~7) == '0')
static inline void translate(char *f, char *t)
{
while (*f != '\0') {
if (*f == '\\' &&
isoctal(f[1]) && isoctal(f[2]) && isoctal(f[3])) {
*t++ = 64*(f[1] & 7) + 8*(f[2] & 7) + (f[3] & 7);
f += 4;
} else
*t++ = *f++;
}
*t = '\0';
return;
}
/*
* Checks if the swap device.
* Returns 1 if swap device, < 0 on error or 0 if not swap device.
*/
int is_swap_device(const char *file)
{
FILE *f;
struct stat st_buf;
dev_t dev;
ino_t ino = 0;
char tmp[PATH_MAX];
char buf[PATH_MAX];
char *cp;
int ret = 0;
if (stat(file, &st_buf) < 0)
return -errno;
if (S_ISBLK(st_buf.st_mode))
dev = st_buf.st_rdev;
else if (S_ISREG(st_buf.st_mode)) {
dev = st_buf.st_dev;
ino = st_buf.st_ino;
} else
return 0;
if ((f = fopen("/proc/swaps", "r")) == NULL)
return 0;
/* skip the first line */
if (fgets(tmp, sizeof(tmp), f) == NULL)
goto out;
while (fgets(tmp, sizeof(tmp), f) != NULL) {
if ((cp = strchr(tmp, ' ')) != NULL)
*cp = '\0';
if ((cp = strchr(tmp, '\t')) != NULL)
*cp = '\0';
translate(tmp, buf);
if (stat(buf, &st_buf) != 0)
continue;
if (S_ISBLK(st_buf.st_mode)) {
if (dev == st_buf.st_rdev) {
ret = 1;
break;
}
} else if (S_ISREG(st_buf.st_mode)) {
if (dev == st_buf.st_dev && ino == st_buf.st_ino) {
ret = 1;
break;
}
}
}
out:
fclose(f);
return ret;
}
/*
* Check for existing filesystem or partition table on device.
* Returns:
* 1 for existing fs or partition
* 0 for nothing found
* -1 for internal error
*/
static int
check_overwrite(
char *device)
{
const char *type;
blkid_probe pr = NULL;
int ret;
blkid_loff_t size;
if (!device || !*device)
return 0;
ret = -1; /* will reset on success of all setup calls */
pr = blkid_new_probe_from_filename(device);
if (!pr)
goto out;
size = blkid_probe_get_size(pr);
if (size < 0)
goto out;
/* nothing to overwrite on a 0-length device */
if (size == 0) {
ret = 0;
goto out;
}
ret = blkid_probe_enable_partitions(pr, 1);
if (ret < 0)
goto out;
ret = blkid_do_fullprobe(pr);
if (ret < 0)
goto out;
/*
* Blkid returns 1 for nothing found and 0 when it finds a signature,
* but we want the exact opposite, so reverse the return value here.
*
* In addition print some useful diagnostics about what actually is
* on the device.
*/
if (ret) {
ret = 0;
goto out;
}
if (!blkid_probe_lookup_value(pr, "TYPE", &type, NULL)) {
fprintf(stderr,
"%s appears to contain an existing "
"filesystem (%s).\n", device, type);
} else if (!blkid_probe_lookup_value(pr, "PTTYPE", &type, NULL)) {
fprintf(stderr,
"%s appears to contain a partition "
"table (%s).\n", device, type);
} else {
fprintf(stderr,
"%s appears to contain something weird "
"according to blkid\n", device);
}
ret = 1;
out:
if (pr)
blkid_free_probe(pr);
if (ret == -1)
fprintf(stderr,
"probe of %s failed, cannot detect "
"existing filesystem.\n", device);
return ret;
}
/* Check if disk is suitable for btrfs
* returns:
* 1: something is wrong, estr provides the error
* 0: all is fine
*/
int test_dev_for_mkfs(char *file, int force_overwrite, char *estr)
{
int ret, fd;
size_t sz = 100;
ret = is_swap_device(file);
if (ret < 0) {
snprintf(estr, sz, "error checking %s status: %s\n", file,
strerror(-ret));
return 1;
}
if (ret == 1) {
snprintf(estr, sz, "%s is a swap device\n", file);
return 1;
}
if (!force_overwrite) {
if (check_overwrite(file)) {
snprintf(estr, sz, "Use the -f option to force overwrite.\n");
return 1;
}
}
ret = check_mounted(file);
if (ret < 0) {
snprintf(estr, sz, "error checking %s mount status\n",
file);
return 1;
}
if (ret == 1) {
snprintf(estr, sz, "%s is mounted\n", file);
return 1;
}
/* check if the device is busy */
fd = open(file, O_RDWR|O_EXCL);
if (fd < 0) {
snprintf(estr, sz, "unable to open %s: %s\n", file,
strerror(errno));
return 1;
}
close(fd);
return 0;
}