korg/bluez
0
0
Fork 0
mirror of https://git.kernel.org/pub/scm/bluetooth/bluez.git synced 2024-12-05 01:54:22 +08:00
Code Issues Packages Projects Releases Wiki Activity
136fe53de3
bluez/tools/hciattach.c
Marcel Holtmann d877c41853 Add ST Microelectronics specific initialization
2003-11-18 08:16:21 +00:00

1067 lines
24 KiB
C
Raw Blame History

/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY CLAIM,
OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, COPYRIGHTS,
TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS SOFTWARE IS DISCLAIMED.
*/
/*
* $Id$
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <signal.h>
#include <fcntl.h>
#include <syslog.h>
#include <errno.h>
#include <time.h>
#include <termios.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <sys/time.h>
#include <asm/types.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/hci.h>
#include <bluetooth/hci_uart.h>
#include <bluetooth/hci_lib.h>
struct uart_t {
char *type;
int m_id;
int p_id;
int proto;
int init_speed;
int speed;
int flags;
int (*init) (int fd, struct uart_t *u, struct termios *ti);
};
#define FLOW_CTL 0x0001
static int uart_speed(int s)
{
switch (s) {
case 9600:
return B9600;
case 19200:
return B19200;
case 38400:
return B38400;
case 57600:
return B57600;
case 115200:
return B115200;
case 230400:
return B230400;
case 460800:
return B460800;
case 921600:
return B921600;
case 1000000:
return B1000000;
case 1152000:
return B1152000;
default:
return B57600;
}
}
static int set_speed(int fd, struct termios *ti, int speed)
{
cfsetospeed(ti, uart_speed(speed));
return tcsetattr(fd, TCSANOW, ti);
}
static void sig_alarm(int sig)
{
fprintf(stderr, "Initialization timed out.\n");
exit(1);
}
/*
* Read an HCI event from the given file descriptor.
*/
static int read_hci_event(int fd, unsigned char* buf, int size)
{
int remain, r;
int count = 0;
if (size <= 0)
return -1;
/* The first byte identifies the packet type. For HCI event packets, it
* should be 0x04, so we read until we get to the 0x04. */
while (1) {
r = read(fd, buf, 1);
if (r <= 0)
return -1;
if (buf[0] == 0x04)
break;
}
count++;
/* The next two bytes are the event code and parameter total length. */
while (count < 3) {
r = read(fd, buf + count, 3 - count);
if (r <= 0)
return -1;
count += r;
}
/* Now we read the parameters. */
if (buf[2] < (size - 3))
remain = buf[2];
else
remain = size - 3;
while ((count - 3) < remain) {
r = read(fd, buf + count, remain - (count - 3));
if (r <= 0)
return -1;
count += r;
}
return count;
}
/*
* Ericsson specific initialization
*/
static int ericsson(int fd, struct uart_t *u, struct termios *ti)
{
struct timespec tm = {0, 50000};
char cmd[5];
cmd[0] = HCI_COMMAND_PKT;
cmd[1] = 0x09;
cmd[2] = 0xfc;
cmd[3] = 0x01;
switch (u->speed) {
case 57600:
cmd[4] = 0x03;
break;
case 115200:
cmd[4] = 0x02;
break;
case 230400:
cmd[4] = 0x01;
break;
case 460800:
cmd[4] = 0x00;
break;
case 921600:
cmd[4] = 0x20;
break;
default:
cmd[4] = 0x03;
u->speed = 57600;
break;
}
/* Send initialization command */
if (write(fd, cmd, 5) != 5) {
perror("Failed to write init command");
return -1;
}
nanosleep(&tm, NULL);
return 0;
}
/*
* Digianswer specific initialization
*/
static int digi(int fd, struct uart_t *u, struct termios *ti)
{
struct timespec tm = {0, 50000};
char cmd[5];
/* DigiAnswer set baud rate command */
cmd[0] = HCI_COMMAND_PKT;
cmd[1] = 0x07;
cmd[2] = 0xfc;
cmd[3] = 0x01;
switch (u->speed) {
case 57600:
cmd[4] = 0x08;
break;
case 115200:
cmd[4] = 0x09;
break;
default:
cmd[4] = 0x09;
u->speed = 115200;
break;
}
/* Send initialization command */
if (write(fd, cmd, 5) != 5) {
perror("Failed to write init command");
return -1;
}
nanosleep(&tm, NULL);
return 0;
}
static int texas(int fd, struct uart_t *u, struct termios *ti)
{
struct timespec tm = {0, 50000};
char cmd[4];
unsigned char resp[100]; /* Response */
int n;
memset(resp,'\0', 100);
/* It is possible to get software version with manufacturer specific
HCI command HCI_VS_TI_Version_Number. But the only thing you get more
is if this is point-to-point or point-to-multipoint module */
/* Get Manufacturer and LMP version */
cmd[0] = HCI_COMMAND_PKT;
cmd[1] = 0x01;
cmd[2] = 0x10;
cmd[3] = 0x00;
do {
n = write(fd, cmd, 4);
if (n < 0) {
perror("Failed to write init command (READ_LOCAL_VERSION_INFORMATION)");
return -1;
}
if (n < 4) {
fprintf(stderr, "Wanted to write 4 bytes, could only write %d. Stop\n", n);
return -1;
}
/* Read reply. */
if (read_hci_event(fd, resp, 100) < 0) {
perror("Failed to read init response (READ_LOCAL_VERSION_INFORMATION)");
return -1;
}
/* Wait for command complete event for our Opcode */
} while (resp[4] != cmd[1] && resp[5] != cmd[2]);
/* Verify manufacturer */
if ((resp[11] & 0xFF) != 0x0d)
fprintf(stderr,"WARNING : module's manufacturer is not Texas Instrument\n");
/* Print LMP version */
fprintf(stderr, "Texas module LMP version : 0x%02x\n", resp[10] & 0xFF);
/* Print LMP subversion */
fprintf(stderr, "Texas module LMP sub-version : 0x%02x%02x\n", resp[14] & 0xFF, resp[13] & 0xFF);
nanosleep(&tm, NULL);
return 0;
}
static int read_check(int fd, void *buf, int count)
{
int res;
do {
res = read(fd, buf, count);
if (res != -1) {
buf += res;
count -= res;
}
} while (count && (errno == 0 || errno == EINTR));
if (count)
return -1;
return 0;
}
/*
* BCSP specific initialization
*/
int serial_fd;
static void bcsp_tshy_sig_alarm(int sig)
{
static int retries=0;
unsigned char bcsp_sync_pkt[10] = {0xc0,0x00,0x41,0x00,0xbe,0xda,0xdc,0xed,0xed,0xc0};
if (retries < 10) {
retries++;
write(serial_fd, &bcsp_sync_pkt, 10);
alarm(1);
return;
}
tcflush(serial_fd, TCIOFLUSH);
fprintf(stderr, "BCSP initialization timed out\n");
exit(1);
}
static void bcsp_tconf_sig_alarm(int sig)
{
static int retries=0;
unsigned char bcsp_conf_pkt[10] = {0xc0,0x00,0x41,0x00,0xbe,0xad,0xef,0xac,0xed,0xc0};
if (retries < 10){
retries++;
write(serial_fd, &bcsp_conf_pkt, 10);
alarm(1);
return;
}
tcflush(serial_fd, TCIOFLUSH);
fprintf(stderr, "BCSP initialization timed out\n");
exit(1);
}
static int bcsp(int fd, struct uart_t *u, struct termios *ti)
{
unsigned char byte, bcsph[4], bcspp[4],
bcsp_sync_resp_pkt[10] = {0xc0,0x00,0x41,0x00,0xbe,0xac,0xaf,0xef,0xee,0xc0},
bcsp_conf_resp_pkt[10] = {0xc0,0x00,0x41,0x00,0xbe,0xde,0xad,0xd0,0xd0,0xc0},
bcspsync[4] = {0xda, 0xdc, 0xed, 0xed},
bcspsyncresp[4] = {0xac,0xaf,0xef,0xee},
bcspconf[4] = {0xad,0xef,0xac,0xed},
bcspconfresp[4] = {0xde,0xad,0xd0,0xd0};
struct sigaction sa;
if (set_speed(fd, ti, u->speed) < 0) {
perror("Can't set default baud rate");
return -1;
}
ti->c_cflag |= PARENB;
ti->c_cflag &= ~(PARODD);
if (tcsetattr(fd, TCSANOW, ti) < 0) {
perror("Can't set port settings");
return -1;
}
alarm(0);
serial_fd = fd;
memset(&sa, 0, sizeof(sa));
sa.sa_flags = SA_NOCLDSTOP;
sa.sa_handler = bcsp_tshy_sig_alarm;
sigaction(SIGALRM, &sa, NULL);
/* State = shy */
bcsp_tshy_sig_alarm(0);
while (1) {
do {
if (read_check(fd, &byte, 1) == -1){
perror("Failed to read");
return -1;
}
} while (byte != 0xC0);
do {
if ( read_check(fd, &bcsph[0], 1) == -1){
perror("Failed to read");
return -1;
}
} while (bcsph[0] == 0xC0);
if ( read_check(fd, &bcsph[1], 3) == -1){
perror("Failed to read");
return -1;
}
if (((bcsph[0] + bcsph[1] + bcsph[2]) & 0xFF) != (unsigned char)~bcsph[3])
continue;
if (bcsph[1] != 0x41 || bcsph[2] != 0x00)
continue;
if (read_check(fd, &bcspp, 4) == -1){
perror("Failed to read");
return -1;
}
if (!memcmp(bcspp, bcspsync, 4)) {
write(fd, &bcsp_sync_resp_pkt,10);
} else if (!memcmp(bcspp, bcspsyncresp, 4))
break;
}
/* State = curious */
alarm(0);
sa.sa_handler = bcsp_tconf_sig_alarm;
sigaction(SIGALRM, &sa, NULL);
alarm(1);
while (1) {
do {
if (read_check(fd, &byte, 1) == -1){
perror("Failed to read");
return -1;
}
} while (byte != 0xC0);
do {
if (read_check(fd, &bcsph[0], 1) == -1){
perror("Failed to read");
return -1;
}
} while (bcsph[0] == 0xC0);
if (read_check(fd, &bcsph[1], 3) == -1){
perror("Failed to read");
return -1;
}
if (((bcsph[0] + bcsph[1] + bcsph[2]) & 0xFF) != (unsigned char)~bcsph[3])
continue;
if (bcsph[1] != 0x41 || bcsph[2] != 0x00)
continue;
if (read_check(fd, &bcspp, 4) == -1){
perror("Failed to read");
return -1;
}
if (!memcmp(bcspp, bcspsync, 4))
write(fd, &bcsp_sync_resp_pkt, 10);
else if (!memcmp(bcspp, bcspconf, 4))
write(fd, &bcsp_conf_resp_pkt, 10);
else if (!memcmp(bcspp, bcspconfresp, 4))
break;
}
/* State = garrulous */
return 0;
}
/*
* CSR specific initialization
* Inspired strongly by code in OpenBT and experimentations with Brainboxes
* Pcmcia card.
* Jean Tourrilhes <jt@hpl.hp.com> - 14.11.01
*/
static int csr(int fd, struct uart_t *u, struct termios *ti)
{
struct timespec tm = {0, 10000000}; /* 10ms - be generous */
unsigned char cmd[30]; /* Command */
unsigned char resp[30]; /* Response */
int clen = 0; /* Command len */
static int csr_seq = 0; /* Sequence number of command */
int divisor;
/* It seems that if we set the CSR UART speed straight away, it
* won't work, the CSR UART gets into a state where we can't talk
* to it anymore.
* On the other hand, doing a read before setting the CSR speed
* seems to be ok.
* Therefore, the strategy is to read the build ID (useful for
* debugging) and only then set the CSR UART speed. Doing like
* this is more complex but at least it works ;-)
* The CSR UART control may be slow to wake up or something because
* every time I read its speed, its bogus...
* Jean II */
/* Try to read the build ID of the CSR chip */
clen = 5 + (5 + 6) * 2;
/* HCI header */
cmd[0] = HCI_COMMAND_PKT;
cmd[1] = 0x00; /* CSR command */
cmd[2] = 0xfc; /* MANUFACTURER_SPEC */
cmd[3] = 1 + (5 + 6) * 2; /* len */
/* CSR MSG header */
cmd[4] = 0xC2; /* first+last+channel=BCC */
/* CSR BCC header */
cmd[5] = 0x00; /* type = GET-REQ */
cmd[6] = 0x00; /* - msB */
cmd[7] = 5 + 4; /* len */
cmd[8] = 0x00; /* - msB */
cmd[9] = csr_seq & 0xFF;/* seq num */
cmd[10] = (csr_seq >> 8) & 0xFF; /* - msB */
csr_seq++;
cmd[11] = 0x19; /* var_id = CSR_CMD_BUILD_ID */
cmd[12] = 0x28; /* - msB */
cmd[13] = 0x00; /* status = STATUS_OK */
cmd[14] = 0x00; /* - msB */
/* CSR BCC payload */
memset(cmd + 15, 0, 6 * 2);
/* Send command */
do {
if (write(fd, cmd, clen) != clen) {
perror("Failed to write init command (GET_BUILD_ID)");
return -1;
}
/* Read reply. */
if (read_hci_event(fd, resp, 100) < 0) {
perror("Failed to read init response (GET_BUILD_ID)");
return -1;
}
/* Event code 0xFF is for vendor-specific events, which is
* what we're looking for. */
} while (resp[1] != 0xFF);
#ifdef CSR_DEBUG
{
char temp[512];
int i;
for (i=0; i < rlen; i++)
sprintf(temp + (i*3), "-%02X", resp[i]);
fprintf(stderr, "Reading CSR build ID %d [%s]\n", rlen, temp + 1);
// In theory, it should look like :
// 04-FF-13-FF-01-00-09-00-00-00-19-28-00-00-73-00-00-00-00-00-00-00
}
#endif
/* Display that to user */
fprintf(stderr, "CSR build ID 0x%02X-0x%02X\n",
resp[15] & 0xFF, resp[14] & 0xFF);
/* Try to read the current speed of the CSR chip */
clen = 5 + (5 + 4)*2;
/* -- HCI header */
cmd[3] = 1 + (5 + 4)*2; /* len */
/* -- CSR BCC header -- */
cmd[9] = csr_seq & 0xFF; /* seq num */
cmd[10] = (csr_seq >> 8) & 0xFF; /* - msB */
csr_seq++;
cmd[11] = 0x02; /* var_id = CONFIG_UART */
cmd[12] = 0x68; /* - msB */
#ifdef CSR_DEBUG
/* Send command */
do {
if (write(fd, cmd, clen) != clen) {
perror("Failed to write init command (GET_BUILD_ID)");
return -1;
}
/* Read reply. */
if (read_hci_event(fd, resp, 100) < 0) {
perror("Failed to read init response (GET_BUILD_ID)");
return -1;
}
/* Event code 0xFF is for vendor-specific events, which is
* what we're looking for. */
} while (resp[1] != 0xFF);
{
char temp[512];
int i;
for (i=0; i < rlen; i++)
sprintf(temp + (i*3), "-%02X", resp[i]);
fprintf(stderr, "Reading CSR UART speed %d [%s]\n", rlen, temp+1);
}
#endif
if (u->speed > 1500000) {
fprintf(stderr, "Speed %d too high. Remaining at %d baud\n",
u->speed, u->init_speed);
u->speed = u->init_speed;
} else if (u->speed != 57600 && uart_speed(u->speed) == B57600) {
/* Unknown speed. Why oh why can't we just pass an int to the kernel? */
fprintf(stderr, "Speed %d unrecognised. Remaining at %d baud\n",
u->speed, u->init_speed);
u->speed = u->init_speed;
}
if (u->speed == u->init_speed)
return 0;
/* Now, create the command that will set the UART speed */
/* CSR BCC header */
cmd[5] = 0x02; /* type = SET-REQ */
cmd[6] = 0x00; /* - msB */
cmd[9] = csr_seq & 0xFF; /* seq num */
cmd[10] = (csr_seq >> 8) & 0xFF;/* - msB */
csr_seq++;
divisor = (u->speed*64+7812)/15625;
/* No parity, one stop bit -> divisor |= 0x0000; */
cmd[15] = (divisor) & 0xFF; /* divider */
cmd[16] = (divisor >> 8) & 0xFF; /* - msB */
/* The rest of the payload will be 0x00 */
#ifdef CSR_DEBUG
{
char temp[512];
int i;
for(i = 0; i < clen; i++)
sprintf(temp + (i*3), "-%02X", cmd[i]);
fprintf(stderr, "Writing CSR UART speed %d [%s]\n", clen, temp + 1);
// In theory, it should look like :
// 01-00-FC-13-C2-02-00-09-00-03-00-02-68-00-00-BF-0E-00-00-00-00-00-00
// 01-00-FC-13-C2-02-00-09-00-01-00-02-68-00-00-D8-01-00-00-00-00-00-00
}
#endif
/* Send the command to set the CSR UART speed */
if (write(fd, cmd, clen) != clen) {
perror("Failed to write init command (SET_UART_SPEED)");
return -1;
}
nanosleep(&tm, NULL);
return 0;
}
/*
* Silicon Wave specific initialization
* Thomas Moser <Thomas.Moser@tmoser.ch>
*/
static int swave(int fd, struct uart_t *u, struct termios *ti)
{
struct timespec tm = {0, 500000};
char cmd[9], rsp[100];
int r;
// Silicon Wave set baud rate command
// see HCI Vendor Specific Interface from Silicon Wave
// first send a "param access set" command to set the
// appropriate data fields in RAM. Then send a "HCI Reset
// Subcommand", e.g. "soft reset" to make the changes effective.
cmd[0] = HCI_COMMAND_PKT; // it's a command packet
cmd[1] = 0x0B; // OCF 0x0B = param access set
cmd[2] = 0xfc; // OGF bx111111 = vendor specific
cmd[3] = 0x06; // 6 bytes of data following
cmd[4] = 0x01; // param sub command
cmd[5] = 0x11; // tag 17 = 0x11 = HCI Transport Params
cmd[6] = 0x03; // length of the parameter following
cmd[7] = 0x01; // HCI Transport flow control enable
cmd[8] = 0x01; // HCI Transport Type = UART
switch (u->speed) {
case 19200:
cmd[9] = 0x03;
break;
case 38400:
cmd[9] = 0x02;
break;
case 57600:
cmd[9] = 0x01;
break;
case 115200:
cmd[9] = 0x00;
break;
default:
u->speed = 115200;
cmd[9] = 0x00;
break;
}
/* Send initialization command */
if (write(fd, cmd, 9) != 9) {
perror("Failed to write init command");
return -1;
}
// We should wait for a "GET Event" to confirm the success of
// the baud rate setting. Wait some time before reading. Better:
// read with timeout, parse data
// until correct answer, else error handling ... todo ...
nanosleep(&tm, NULL);
r = read(fd, rsp, sizeof(rsp));
if (r > 0) {
// guess it's okay, but we should parse the reply. But since
// I don't react on an error anyway ... todo
// Response packet format:
// 04 Event
// FF Vendor specific
// 07 Parameter length
// 0B Subcommand
// 01 Setevent
// 11 Tag specifying HCI Transport Layer Parameter
// 03 length
// 01 flow on
// 01 Hci Transport type = Uart
// xx Baud rate set (see above)
} else {
// ups, got error.
return -1;
}
// we probably got the reply. Now we must send the "soft reset":
cmd[0] = HCI_COMMAND_PKT; // it's a command packet
cmd[1] = 0x0B; // OCF 0x0B = param access set
cmd[2] = 0xfc; // OGF bx111111 = vendor specific
cmd[3] = 0x01; // 1 byte of data following
cmd[4] = 0x03; // HCI Reset Subcommand
// Send initialization command
if (write(fd, cmd, 5) != 5) {
perror("Can't write Silicon Wave reset cmd.");
return -1;
}
nanosleep(&tm, NULL);
// now the uart baud rate on the silicon wave module is set and effective.
// change our own baud rate as well. Then there is a reset event comming in
// on the *new* baud rate. This is *undocumented*! The packet looks like this:
// 04 FF 01 0B (which would make that a confirmation of 0x0B = "Param
// subcommand class". So: change to new baud rate, read with timeout, parse
// data, error handling. BTW: all param access in Silicon Wave is done this way.
// Maybe this code would belong in a seperate file, or at least code reuse...
return 0;
}
/*
* ST Microelectronics specific initialization
* Marcel Holtmann <marcel@holtmann.org>
*/
static int st(int fd, struct uart_t *u, struct termios *ti)
{
struct timespec tm = {0, 50000};
char cmd[5];
/* ST Microelectronics set baud rate command */
cmd[0] = HCI_COMMAND_PKT;
cmd[1] = 0x46; // OCF = Hci_Cmd_ST_Set_Uart_Baud_Rate
cmd[2] = 0xfc; // OGF = Vendor specific
cmd[3] = 0x01;
switch (u->speed) {
case 9600:
cmd[4] = 0x09;
break;
case 19200:
cmd[4] = 0x0b;
break;
case 38400:
cmd[4] = 0x0d;
break;
case 57600:
cmd[4] = 0x0e;
break;
case 115200:
cmd[4] = 0x10;
break;
case 230400:
cmd[4] = 0x12;
break;
case 460800:
cmd[4] = 0x13;
break;
case 921600:
cmd[4] = 0x14;
break;
default:
cmd[4] = 0x10;
u->speed = 57600;
break;
}
/* Send initialization command */
if (write(fd, cmd, 5) != 5) {
perror("Failed to write init command");
return -1;
}
nanosleep(&tm, NULL);
return 0;
}
struct uart_t uart[] = {
{ "any", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL },
{ "ericsson", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200, FLOW_CTL, ericsson },
{ "digi", 0x0000, 0x0000, HCI_UART_H4, 9600, 115200, FLOW_CTL, digi },
{ "texas", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, texas},
{ "bcsp", 0x0000, 0x0000, HCI_UART_BCSP, 115200, 115200, 0, bcsp },
/* Xircom PCMCIA cards: Credit Card Adapter and Real Port Adapter */
{ "xircom", 0x0105, 0x080a, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL },
/* CSR Casira serial adapter or BrainBoxes serial dongle (BL642) */
{ "csr", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, csr },
/* BrainBoxes PCMCIA card (BL620) */
{ "bboxes", 0x0160, 0x0002, HCI_UART_H4, 115200, 460800, FLOW_CTL, csr },
/* Silicon Wave kits */
{ "swave", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, swave },
/* ST Microelectronics minikits based on STLC2410/STLC2415 */
{ "st", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200, FLOW_CTL, st },
/* Sphinx Electronics PICO Card */
{ "picocard", 0x025e, 0x1000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL },
/* Inventel BlueBird Module */
{ "inventel", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL },
/* COM One Platinium Bluetooth PC Card */
{ "comone", 0xffff, 0x0101, HCI_UART_BCSP, 115200, 115200, 0, bcsp },
/* TDK Bluetooth PC Card and IBM Bluetooth PC Card II */
{ "tdk", 0x0105, 0x4254, HCI_UART_BCSP, 115200, 115200, 0, bcsp },
/* Socket Bluetooth CF Card (Rev G) */
{ "socket", 0x0104, 0x0096, HCI_UART_BCSP, 230400, 230400, 0, bcsp },
/* 3Com Bluetooth Card (Version 3.0) */
{ "3com", 0x0101, 0x0041, HCI_UART_H4, 115200, 115200, FLOW_CTL, csr },
{ NULL, 0 }
};
struct uart_t * get_by_id(int m_id, int p_id)
{
int i;
for (i = 0; uart[i].type; i++) {
if (uart[i].m_id == m_id && uart[i].p_id == p_id)
return &uart[i];
}
return NULL;
}
struct uart_t * get_by_type(char *type)
{
int i;
for (i = 0; uart[i].type; i++) {
if (!strcmp(uart[i].type, type))
return &uart[i];
}
return NULL;
}
/* Initialize UART driver */
int init_uart(char *dev, struct uart_t *u, int send_break)
{
struct termios ti;
int fd, i;
fd = open(dev, O_RDWR | O_NOCTTY);
if (fd < 0) {
perror("Can't open serial port");
return -1;
}
tcflush(fd, TCIOFLUSH);
if (tcgetattr(fd, &ti) < 0) {
perror("Can't get port settings");
return -1;
}
cfmakeraw(&ti);
ti.c_cflag |= CLOCAL;
if (u->flags & FLOW_CTL)
ti.c_cflag |= CRTSCTS;
else
ti.c_cflag &= ~CRTSCTS;
if (tcsetattr(fd, TCSANOW, &ti) < 0) {
perror("Can't set port settings");
return -1;
}
/* Set initial baudrate */
if (set_speed(fd, &ti, u->init_speed) < 0) {
perror("Can't set initial baud rate");
return -1;
}
tcflush(fd, TCIOFLUSH);
if (send_break)
tcsendbreak(fd, 0);
if (u->init && u->init(fd, u, &ti) < 0)
return -1;
tcflush(fd, TCIOFLUSH);
/* Set actual baudrate */
if (set_speed(fd, &ti, u->speed) < 0) {
perror("Can't set baud rate");
return -1;
}
/* Set TTY to N_HCI line discipline */
i = N_HCI;
if (ioctl(fd, TIOCSETD, &i) < 0) {
perror("Can't set line discipline");
return -1;
}
if (ioctl(fd, HCIUARTSETPROTO, u->proto) < 0) {
perror("Can't set device");
return -1;
}
return fd;
}
static void usage(void)
{
printf("hciattach - HCI UART driver initialization utility\n");
printf("Usage:\n");
printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow]\n");
printf("\thciattach -l\n");
}
extern int optind, opterr, optopt;
extern char *optarg;
int main(int argc, char *argv[])
{
struct uart_t *u = NULL;
int detach, printpid, opt, i, n;
int to = 5;
int init_speed = 0;
int send_break = 0;
pid_t pid;
struct sigaction sa;
char dev[20];
detach = 1;
printpid = 0;
while ((opt=getopt(argc, argv, "bnpt:s:l")) != EOF) {
switch(opt) {
case 'b':
send_break = 1;
break;
case 'n':
detach = 0;
break;
case 'p':
printpid = 1;
break;
case 't':
to = atoi(optarg);
break;
case 's':
init_speed = atoi(optarg);
break;
case 'l':
for (i = 0; uart[i].type; i++) {
printf("%-10s0x%04x,0x%04x\n", uart[i].type,
uart[i].m_id, uart[i].p_id);
}
exit(0);
default:
usage();
exit(1);
}
}
n = argc - optind;
if (n < 2) {
usage();
exit(1);
}
for (n = 0; optind < argc; n++, optind++) {
char *opt;
opt = argv[optind];
switch(n) {
case 0:
dev[0] = 0;
if (!strchr(opt, '/'))
strcpy(dev, "/dev/");
strcat(dev, opt);
break;
case 1:
if (strchr(argv[optind], ',')) {
int m_id, p_id;
sscanf(argv[optind], "%x,%x", &m_id, &p_id);
u = get_by_id(m_id, p_id);
} else {
u = get_by_type(opt);
}
if (!u) {
fprintf(stderr, "Unknown device type or id\n");
exit(1);
}
break;
case 2:
u->speed = atoi(argv[optind]);
break;
case 3:
if (!strcmp("flow", argv[optind]))
u->flags |= FLOW_CTL;
else
u->flags &= ~FLOW_CTL;
break;
}
}
if (!u) {
fprintf(stderr, "Unknown device type or id\n");
exit(1);
}
/* If user specified a initial speed, use that instead of
the hardware's default */
if (init_speed)
u->init_speed = init_speed;
memset(&sa, 0, sizeof(sa));
sa.sa_flags = SA_NOCLDSTOP;
sa.sa_handler = sig_alarm;
sigaction(SIGALRM, &sa, NULL);
/* 5 seconds should be enough for initialization */
alarm(to);
n = init_uart(dev, u, send_break);
if (n < 0) {
perror("Can't initialize device");
exit(1);
}
alarm(0);
if (detach) {
if ((pid = fork())) {
if (printpid)
printf("%d\n", pid);
return 0;
}
for (i=0; i<20; i++)
if (i != n) close(i);
}
while (1) sleep(999999999);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink