bluez/tools/hciattach_bcm43xx.c
Loic Poulain 8366eae6d7 tools: add bcm43xx specific init in hciattach
Add a bcm43xx specific init sequence in hciattach
in order to initialize bcm43xx controllers.
2014-04-04 20:10:08 +03:00

379 lines
8.4 KiB
C

/*
*
* BlueZ - Bluetooth protocol stack for Linux
*
* Copyright (C) 2014 Intel Corporation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <termios.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <time.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/hci.h>
#include <bluetooth/hci_lib.h>
#include "hciattach.h"
#ifndef FIRMWARE_DIR
#define FIRMWARE_DIR "/etc/firmware"
#endif
#define FW_EXT ".hcd"
#define BCM43XX_CLOCK_48 1
#define BCM43XX_CLOCK_24 2
#define CMD_SUCCESS 0x00
#define CC_MIN_SIZE 7
#define MIN(X,Y) ((X) < (Y) ? (X) : (Y))
static int bcm43xx_read_local_name(int fd, char *name, size_t size)
{
unsigned char cmd[] = { HCI_COMMAND_PKT, 0x14, 0x0C, 0x00 };
unsigned char *resp;
unsigned int name_len;
resp = malloc(size + CC_MIN_SIZE);
if (!resp)
return -1;
tcflush(fd, TCIOFLUSH);
if (write(fd, cmd, sizeof(cmd)) != sizeof(cmd)) {
fprintf(stderr, "Failed to write read local name command\n");
goto fail;
}
if (read_hci_event(fd, resp, size) < CC_MIN_SIZE) {
fprintf(stderr, "Failed to read local name, invalid HCI event\n");
goto fail;
}
if (resp[4] != cmd[1] || resp[5] != cmd[2] || resp[6] != CMD_SUCCESS) {
fprintf(stderr, "Failed to read local name, command failure\n");
goto fail;
}
name_len = resp[2] - 1;
strncpy(name, (char *) &resp[7], MIN(name_len, size));
name[size - 1] = 0;
free(resp);
return 0;
fail:
free(resp);
return -1;
}
static int bcm43xx_reset(int fd)
{
unsigned char cmd[] = { HCI_COMMAND_PKT, 0x03, 0x0C, 0x00 };
unsigned char resp[CC_MIN_SIZE];
if (write(fd, cmd, sizeof(cmd)) != sizeof(cmd)) {
fprintf(stderr, "Failed to write reset command\n");
return -1;
}
if (read_hci_event(fd, resp, sizeof(resp)) < CC_MIN_SIZE) {
fprintf(stderr, "Failed to reset chip, invalid HCI event\n");
return -1;
}
if (resp[4] != cmd[1] || resp[5] != cmd[2] || resp[6] != CMD_SUCCESS) {
fprintf(stderr, "Failed to reset chip, command failure\n");
return -1;
}
return 0;
}
static int bcm43xx_set_bdaddr(int fd, const char *bdaddr)
{
unsigned char cmd[] =
{ HCI_COMMAND_PKT, 0x01, 0xfc, 0x06, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00 };
unsigned char resp[CC_MIN_SIZE];
printf("Set BDADDR UART: %s\n", bdaddr);
if (str2ba(bdaddr, (bdaddr_t *) (&cmd[4])) < 0) {
fprintf(stderr, "Incorrect bdaddr\n");
return -1;
}
tcflush(fd, TCIOFLUSH);
if (write(fd, cmd, sizeof(cmd)) != sizeof(cmd)) {
fprintf(stderr, "Failed to write set bdaddr command\n");
return -1;
}
if (read_hci_event(fd, resp, sizeof(resp)) < CC_MIN_SIZE) {
fprintf(stderr, "Failed to set bdaddr, invalid HCI event\n");
return -1;
}
if (resp[4] != cmd[1] || resp[5] != cmd[2] || resp[6] != CMD_SUCCESS) {
fprintf(stderr, "Failed to set bdaddr, command failure\n");
return -1;
}
return 0;
}
static int bcm43xx_set_speed(int fd, uint32_t speed)
{
unsigned char cmd[] =
{ HCI_COMMAND_PKT, 0x18, 0xfc, 0x06, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00 };
unsigned char resp[CC_MIN_SIZE];
printf("Set Controller UART speed to %d bit/s\n", speed);
cmd[6] = (uint8_t) (speed);
cmd[7] = (uint8_t) (speed >> 8);
cmd[8] = (uint8_t) (speed >> 16);
cmd[9] = (uint8_t) (speed >> 24);
tcflush(fd, TCIOFLUSH);
if (write(fd, cmd, sizeof(cmd)) != sizeof(cmd)) {
fprintf(stderr, "Failed to write update baudrate command\n");
return -1;
}
if (read_hci_event(fd, resp, sizeof(resp)) < CC_MIN_SIZE) {
fprintf(stderr, "Failed to update baudrate, invalid HCI event\n");
return -1;
}
if (resp[4] != cmd[1] || resp[5] != cmd[2] || resp[6] != CMD_SUCCESS) {
fprintf(stderr, "Failed to update baudrate, command failure\n");
return -1;
}
return 0;
}
static int bcm43xx_set_clock(int fd, unsigned char clock)
{
unsigned char cmd[] = { HCI_COMMAND_PKT, 0x45, 0xfc, 0x01, 0x00 };
unsigned char resp[CC_MIN_SIZE];
printf("Set Controller clock (%d)\n", clock);
cmd[4] = clock;
tcflush(fd, TCIOFLUSH);
if (write(fd, cmd, sizeof(cmd)) != sizeof(cmd)) {
fprintf(stderr, "Failed to write update clock command\n");
return -1;
}
if (read_hci_event(fd, resp, sizeof(resp)) < CC_MIN_SIZE) {
fprintf(stderr, "Failed to update clock, invalid HCI event\n");
return -1;
}
if (resp[4] != cmd[1] || resp[5] != cmd[2] || resp[6] != CMD_SUCCESS) {
fprintf(stderr, "Failed to update clock, command failure\n");
return -1;
}
return 0;
}
static int bcm43xx_load_firmware(int fd, const char *fw)
{
unsigned char cmd[] = { HCI_COMMAND_PKT, 0x2e, 0xfc, 0x00 };
struct timespec tm_mode = { 0, 50000 };
struct timespec tm_ready = { 0, 2000000 };
unsigned char resp[CC_MIN_SIZE];
unsigned char tx_buf[1024];
int len, fd_fw, n;
printf("Flash firmware %s\n", fw);
fd_fw = open(fw, O_RDONLY);
if (fd_fw < 0) {
fprintf(stderr, "Unable to open firmware (%s)\n", fw);
return -1;
}
tcflush(fd, TCIOFLUSH);
if (write(fd, cmd, sizeof(cmd)) != sizeof(cmd)) {
fprintf(stderr, "Failed to write download mode command\n");
goto fail;
}
if (read_hci_event(fd, resp, sizeof(resp)) < CC_MIN_SIZE) {
fprintf(stderr, "Failed to load firmware, invalid HCI event\n");
goto fail;
}
if (resp[4] != cmd[1] || resp[5] != cmd[2] || resp[6] != CMD_SUCCESS) {
fprintf(stderr, "Failed to load firmware, command failure\n");
goto fail;
}
/* Wait 50ms to let the firmware placed in download mode */
nanosleep(&tm_mode, NULL);
tcflush(fd, TCIOFLUSH);
while ((n = read(fd_fw, &tx_buf[1], 3))) {
if (n < 0) {
fprintf(stderr, "Failed to read firmware\n");
goto fail;
}
tx_buf[0] = HCI_COMMAND_PKT;
len = tx_buf[3];
if (read(fd_fw, &tx_buf[4], len) < 0) {
fprintf(stderr, "Failed to read firmware\n");
goto fail;
}
if (write(fd, tx_buf, len + 4) != (len + 4)) {
fprintf(stderr, "Failed to write firmware\n");
goto fail;
}
read_hci_event(fd, resp, sizeof(resp));
tcflush(fd, TCIOFLUSH);
}
/* Wait for firmware ready */
nanosleep(&tm_ready, NULL);
close(fd_fw);
return 0;
fail:
close(fd_fw);
return -1;
}
static int bcm43xx_locate_patch(const char *dir_name,
const char *chip_name, char *location)
{
DIR *dir;
int ret = -1;
dir = opendir(dir_name);
if (!dir) {
fprintf(stderr, "Cannot open directory '%s': %s\n",
dir_name, strerror(errno));
return -1;
}
/* Recursively look for a BCM43XX*.hcd */
while (1) {
struct dirent *entry = readdir(dir);
if (!entry)
break;
if (entry->d_type & DT_DIR) {
char path[PATH_MAX];
if (!strcmp(entry->d_name, "..") || !strcmp(entry->d_name, "."))
continue;
snprintf(path, PATH_MAX, "%s/%s", dir_name, entry->d_name);
ret = bcm43xx_locate_patch(path, chip_name, location);
if (!ret)
break;
} else if (!strncmp(chip_name, entry->d_name, strlen(chip_name))) {
unsigned int name_len = strlen(entry->d_name);
size_t curs_ext = name_len - sizeof(FW_EXT) + 1;
if (curs_ext > name_len)
break;
if (strncmp(FW_EXT, &entry->d_name[curs_ext], sizeof(FW_EXT)))
break;
/* found */
snprintf(location, PATH_MAX, "%s/%s", dir_name, entry->d_name);
ret = 0;
break;
}
}
closedir(dir);
return ret;
}
int bcm43xx_init(int fd, int speed, struct termios *ti, const char *bdaddr)
{
char chip_name[20];
char fw_path[PATH_MAX];
printf("bcm43xx_init\n");
if (bcm43xx_reset(fd))
return -1;
if (bcm43xx_read_local_name(fd, chip_name, sizeof(chip_name)))
return -1;
if (bcm43xx_locate_patch(FIRMWARE_DIR, chip_name, fw_path)) {
fprintf(stderr, "Patch not found, continue anyway\n");
} else {
if (bcm43xx_load_firmware(fd, fw_path))
return -1;
if (bcm43xx_reset(fd))
return -1;
}
if (bdaddr)
bcm43xx_set_bdaddr(fd, bdaddr);
if (speed > 3000000 && bcm43xx_set_clock(fd, BCM43XX_CLOCK_48))
return -1;
if (bcm43xx_set_speed(fd, speed))
return -1;
return 0;
}