Background ========== - Priority scale: High, Medium and Low - Complexity scale: C1, C2, C4 and C8. The complexity scale is exponential, with complexity 1 being the lowest complexity. Complexity is a function of both task 'complexity' and task 'scope'. The general rule of thumb is that a complexity 1 task should take 1-2 weeks for a person very familiar with BlueZ codebase. Higher complexity tasks require more time and have higher uncertainty. Higher complexity tasks should be refined into several lower complexity tasks once the task is better understood. General ========== - UUID handling: Use the new functions created for UUID handling in all parts of BlueZ code. Currently, the new bt_uuid_* functions are being used by GATT-related code only. Priority: high Complexity: C4 - Rename glib-helper file to a more convenient name. The ideia is try to keep only sdp helpers functions. bt_* prefix shall be also changed. Priority: Low Complexity: C1 BlueZ 5 ======= Priority/Complexity ommited as all items are required before 5.0 is released. - [done] Make mgmtops part of Bluetooth core. mgmt will be the only way to communicate with the kernel in BlueZ so a plugin is not needed anymore. Probably plugins/mgmtops.c -> src/mgmt.c - Reorganize source tree according to RFC sent to linux-bluetooth (Subject: [RFC] Reorganizing the BlueZ source tree) - Remove deprecated D-Bus signals and methods (ensuring new ones are in place to replace what's removed). - Remove telephony driver framework and replace with the telephony agent patches. - Related to the telephony architecture rework, figure out how fast connectable should work. - New FastConnectable Adapter property? - Should the property fall back to False after a timeout (e.g. 30 seconds)? - Should the kernel auto-disable this mode as soon as the adapter gets an incoming connect request? - [done] Remove UNIX socket based audio interface (along with ALSA plugin) - Clean up libbluetooth and only export a very minimal API (for RFCOMM/L2CAP socket use) - Merge obexd.git into bluez.git - [done] Remove unmaintained plugins like pnat and maemo6 - Change DiscoverServices to return a list of service object paths - Add Agent callback for incoming just-works, maybe remote lost key as well? BlueZ 6 ======= - Switch to standard D-Bus properties interface - Switch to standard object manager interface Low Energy ========== - Advertising management. Adapter interface needs to be changed to manage connection modes, adapter type and advertising policy. See Volume 3, Part C, section 9.3. If Attribute Server is enabled the LE capable adapter shall to start advertising. Further investigation is necessary to define which connectable mode needs to be supported: Non-connectable, directed connectable and undirected connectable. Basically, two connectable scenarios shall be addressed: 1. GATT client is disconnected, but intends to become a Peripheral to receive indications/notifications. 2. GATT server intends to accept connections. Priority: Medium Complexity: C2 - Define Auto Connection Establishment Procedure. Some profiles such as Proximity requires an active link to identify path lost situation. It is necessary to define how to manage connections, it seems that White List is appropriated to address auto connections, however is not clear if the this procedure shall be a profile specific detail or if the remote device object can expose a property "WhiteList", maybe "Trusted" property can be also used for this purpose. Another alternative is to define a method to allow application to request/register the wanted scanning/connection parameters. Before start this task, a RFC/PATCH shall be sent to the ML. See Volume 3, Part C, section 9.3.5 for more information. Priority: Medium Complexity: C2 - Implement a tool(or extend hciconfig) to setup the advertising parameters and data. Extend hciconfig passing extra arguments when enabling the advertises is not the right approach, it will be almost impossible to address all arguments needed in an acceptable way. For testing, we need a tool to change easily the AD Flags, the UUIDs and other data that can be exported through the advertising data field. Suggestions: 1) extend hciconfig passing a config file when enabling advertises; 2) write a ncurses based tool Priority: Medium Complexity: C2 - Add new property in the DeviceFound signal to report the device type: BR/EDR, single mode or dual-mode. Priority: Medium Complexity: C1 - Privacy: When privacy is enabled in the adapter, LE scanning/connection should use a private address. StartDiscovery method shall be changed and new adapter property shall be added. Priority: Medium Complexity: C1 - Static random address setup and storage. Once this address is written in the a given remote, the address can not be changed anymore. Priority: Low Complexity: C1 - Reconnection address: Reconnection address is a non resolvable private address that the central writes in the peripheral. BlueZ will support multiple profiles, it is not clear how it needs to be implemented. Further discussion is necessary. Priority: Low Complexity: C2 - Device Name Characteristic is a GAP characteristic for Low Energy. This characteristic shall be integrated/used in the discovery procedure. The ideia is to report the value of this characteristic using DeviceFound signals. Discussion with the community is needed before to start this task. Other GAP characteristics for LE needs to follow a similar approach. It is not clear if all GAP characteristics can be exposed using properties instead of a primary service characteristics. See Volume 3, Part C, section 12.1 for more information. Priority: Low Complexity: C2 ATT/GATT ======== - At the moment authentication and authorization is not supported at the same time, read/write requirements in the attribute server needs to be extended. According to Bluetooth Specification a server shall check authentication and authorization requirements before any other check is performed. Priority: Medium Complexity: C1 - ATT/GATT parsing to hcidump. Partially implemented, missing to fix multiple advertises in the same event and RSSI. Priority: Medium Complexity: C2 - Implement ATT PDU validation. Malformed PDUs can cause division by zero when decoding PDUs. A proper error PDU should be returned for this case. See decoding function in att.c file. Priority: Medium Complexity: C1 - Fix hard-coded PSM for GATT services over basic rate. Priority: Low Complexity: C1 - Refactor read_by_group() and read_by_type() in src/attrib-server.c (they've grown simply too big). First step could be to move out the long for-loops to new functions called e.g. get_groups() and get_types(). Priority: Low Complexity: C1 - Agent for characteristics: Agent interface should be extended to support authorization per characteristic if the remote is not in the trusted list. Priority: Low Complexity: C1 - gatttool should have the ability to wait for req responses before quitting (some servers require a small sleep even with cmd's). Maybe a --delay-exit or --timeout command line switch. Priority: Low Complexity: C1 - Refactoring of gatt.c functions. Currently, the callbacks of the services and characteristics discovery functions return the ATT PDU and the caller needs to call again the same function to fetch the remaining data when necessary. Investigate if all results can be returned in the callback result to avoid repeated code. Before change the code, please analyze if this change will not break the GATT/ATT qualification tests. Maybe an interactive fetch/query is necessary to pass the tests. Priority: Low Complexity: C1 - Client needs to export a property in the Device Characteristic hierarchy to manage characteristic value changes reports in the remote device. Currently, Client Characteristic Configuration attribute is not exposed as an object. The user needs to use gatttool to change the value of the this attribute to receive notification/indications. Export this attribute as a property is a proposal that needs further discussion. Priority: Low Complexity: C1 - Attribute server should process queued GATT/ATT commands if the client disconnects. The client can simply send a command and quit, without wait for a response(ex: Write Command). For this scenario that the client disconnects the link quickly the queued received command is ignored. Priority: Low Complecity: C1 - Add sdp discovery support to gattool with BR (--sdp, default is 0x1f) Priority: Low Complexity: C1 - Implement Server characteristic Configuration support in the attribute server to manage characteristic value broadcasting. There is a single instance of the Server Characteristic Configuration for all clients. See Volume 3, Part G, section 3.3.3.4 for more information. Priority: Low Complexity: C1 - Long write is not implemented. Attribute server, client and command line tool shall be changed to support this feature. Priority: Low Complexity: C2 - Define attribute server API. External applications needs to register, change attributes and to be notified about changes. Example: Proximity, Time and Alert Profiles. "Local Service hierarchy" in the attribute-api needs to be proposed and a RFC shall be sent to the ML. Priority: Low Complexity: C2 Owner: Anderson Lizardo Management Interface ==================== - Whitelist support (initially only for LE) Priority: Medium Complexity: C2 Owner: Andre Guedes