// SPDX-License-Identifier: GPL-2.0-or-later /* * * BlueZ - Bluetooth protocol stack for Linux * * Copyright 2023 NXP * * */ #ifdef HAVE_CONFIG_H #include #endif #define _GNU_SOURCE #include #include #include #include #include #include "lib/bluetooth.h" #include "lib/uuid.h" #include "src/shared/util.h" #include "src/shared/io.h" #include "src/shared/tester.h" #include "src/shared/queue.h" #include "src/shared/att.h" #include "src/shared/gatt-db.h" #include "src/shared/gatt-client.h" #include "src/shared/gatt-server.h" #include "src/shared/bass.h" struct test_data { struct gatt_db *db; struct bt_bass *bass; struct bt_gatt_server *server; struct queue *ccc_states; size_t iovcnt; struct iovec *iov; }; struct ccc_state { uint16_t handle; uint16_t value; }; /* ATT: Exchange MTU Request (0x02) len 2 * Client RX MTU: 64 * ATT: Exchange MTU Response (0x03) len 2 * Server RX MTU: 64 */ #define EXCHANGE_MTU \ IOV_DATA(0x02, 0x40, 0x00), \ IOV_DATA(0x03, 0x40, 0x00) /* ATT: Find By Type Value Request (0x06) len 8 * Handle range: 0x0001-0xffff * Attribute Type(UUID): Primary Service (0x2800) * Value to find: Broadcast Audio Scan Service (0x184f) * ATT: Find By Type Value Response (0x07) len 4 * Handle range: 0x0001-0x0009 * ATT: Find By Type Value Request (0x06) len 8 * Handle range: 0x000a-0xffff * Attribute Type(UUID): Primary Service (0x2800) * Value to find: Broadcast Audio Scan Service (0x184f) * ATT: Error Response (0x01) len 4 * Find By Type Value Request (0x06) * Handle: 0x000a * Error: Attribute Not Found (0x0a) */ #define BASS_FIND_BY_TYPE_VALUE \ IOV_DATA(0x06, 0x01, 0x00, 0xff, 0xff, 0x00, 0x28, 0x4f, 0x18), \ IOV_DATA(0x07, 0x01, 0x00, 0x09, 0x00), \ IOV_DATA(0x06, 0x0a, 0x00, 0xff, 0xff, 0x00, 0x28, 0x4f, 0x18), \ IOV_DATA(0x01, 0x06, 0x0a, 0x00, 0x0a) /* ATT: Read By Type Request (0x08) len 6 * Handle range: 0x0001-0x0009 * Attribute type: Characteristic (0x2803) * ATT: Read By Type Response (0x09) len 22 * Attribute data length: 7 * Attribute data list: 3 entries * Handle: 0x0002 * Value: 120300c82b * Properties: 0x12 * Read (0x02) * Notify (0x10) * Value Handle: 0x0003 * Value UUID: Broadcast Receive State (0x2bc8) * Handle: 0x0005 * Value: 120600c82b * Properties: 0x12 * Read (0x02) * Notify (0x10) * Value Handle: 0x0006 * Value UUID: Broadcast Receive State (0x2bc8) * Handle: 0x0008 * Value: 0c0900c72b * Properties: 0x0c * Write (0x08) * Write Without Response (0x04) * Value Handle: 0x0009 * Value UUID: Broadcast Audio Scan Control Point (0x2bc7) * ATT: Read By Type Request (0x08) len 6 * Handle range: 0x0009-0x0009 * Attribute type: Characteristic (0x2803) * ATT: Error Response (0x01) len 4 * Read By Type Request (0x08) * Handle: 0x0009 * Error: Attribute Not Found (0x0a) */ #define DISC_BASS_CHAR \ IOV_DATA(0x08, 0x01, 0x00, 0x09, 0x00, 0x03, 0x28), \ IOV_DATA(0x09, 0x07, \ 0x02, 0x00, 0x12, 0x03, 0x00, 0xc8, 0x2b, \ 0x05, 0x00, 0x12, 0x06, 0x00, 0xc8, 0x2b, \ 0x08, 0x00, 0x0c, 0x09, 0x00, 0xc7, 0x2b), \ IOV_DATA(0x08, 0x09, 0x00, 0x09, 0x00, 0x03, 0x28), \ IOV_DATA(0x01, 0x08, 0x09, 0x00, 0x0a) /* ATT: Read By Group Type Request (0x10) len 6 * Handle range: 0x0001-0xffff * Attribute group type: Primary Service (0x2800) * ATT: Read By Group Type Response (0x11) len 7 * Attribute data length: 6 * Attribute group list: 1 entry * Handle range: 0x0001-0x0009 * UUID: Broadcast Audio Scan Service (0x184f) * ATT: Read By Group Type Request (0x10) len 6 * Handle range: 0x000a-0xffff * Attribute group type: Primary Service (0x2800) * ATT: Error Response (0x01) len 4 * Read By Group Type Request (0x10) * Handle: 0x000a * Error: Attribute Not Found (0x0a) */ #define DISC_BASS_SER \ EXCHANGE_MTU,\ IOV_DATA(0x10, 0x01, 0x00, 0xff, 0xff, 0x00, 0x28), \ IOV_DATA(0x11, 0x06, 0x01, 0x00, 0x09, 0x00, 0x4f, 0x18), \ IOV_DATA(0x10, 0x0a, 0x00, 0xff, 0xff, 0x00, 0x28), \ IOV_DATA(0x01, 0x10, 0x0a, 0x00, 0x0a), \ BASS_FIND_BY_TYPE_VALUE, \ DISC_BASS_CHAR /* ATT: Find Information Request (0x04) len 4 * Handle range: 0x0004-0x0004 * ATT: Find Information Response (0x05) len 5 * Format: Handle(s) and 16 bit bluetooth UUID(s) (0x01) * Handle: 0x0004 * Attribute: Client Characteristic Configuration (0x2902) * ATT: Find Information Request (0x04) len 4 * Handle range: 0x0007-0x0007 * ATT: Find Information Response (0x05) len 5 * Format: Handle(s) and 16 bit bluetooth UUID(s) (0x01) * Handle: 0x0007 * Attribute: Client Characteristic Configuration (0x2902) */ #define BASS_FIND_INFO \ IOV_DATA(0x04, 0x04, 0x00, 0x04, 0x00), \ IOV_DATA(0x05, 0x01, 0x04, 0x00, 0x02, 0x29), \ IOV_DATA(0x04, 0x07, 0x00, 0x07, 0x00), \ IOV_DATA(0x05, 0x01, 0x07, 0x00, 0x02, 0x29) #define DISC_BCAST_AUDIO_SCAN_CP \ BASS_FIND_BY_TYPE_VALUE, \ DISC_BASS_CHAR, \ BASS_FIND_INFO /* ATT: Read Request (0x0a) len 2 * Handle: 0x0004 Type: Client Characteristic Configuration (0x2902) * ATT: Read Response (0x0b) len 2 * Value: 0000 * Handle: 0x0004 Type: Client Characteristic Configuration (0x2902) * ATT: Read Request (0x0a) len 2 * Handle: 0x0007 Type: Client Characteristic Configuration (0x2902) * ATT: Read Response (0x0b) len 2 * Value: 0000 * Handle: 0x0007 Type: Client Characteristic Configuration (0x2902) */ #define BASS_READ_CHAR_DESC \ IOV_DATA(0x0a, 0x04, 0x00), \ IOV_DATA(0x0b, 0x00, 0x00), \ IOV_DATA(0x0a, 0x07, 0x00), \ IOV_DATA(0x0b, 0x00, 0x00) #define DISC_BCAST_RECV_STATE \ DISC_BCAST_AUDIO_SCAN_CP, \ BASS_READ_CHAR_DESC /* ATT: Write Request (0x12) len 4 * Handle: 0x0004 Type: Client Characteristic Configuration (0x2902) * Data: 0100 * Notification (0x01) * ATT: Write Response (0x13) len 0 * ATT: Write Request (0x12) len 4 * Handle: 0x0007 Type: Client Characteristic Configuration (0x2902) * Data: 0100 * Notification (0x01) * ATT: Write Response (0x13) len 0 */ #define BASS_WRITE_CHAR_DESC \ IOV_DATA(0x12, 0x04, 0x00, 0x01, 0x00), \ IOV_DATA(0x13), \ IOV_DATA(0x12, 0x07, 0x00, 0x01, 0x00), \ IOV_DATA(0x13) /* ATT: Read Request (0x0a) len 2 * Handle: 0x0003 Type: Broadcast Receive State (0x2bc8) * ATT: Read Response (0x0b) len 0 * Handle: 0x0003 Broadcast Receive State (0x2bc8) * ATT: Read Request (0x0a) len 2 * Handle: 0x0006 Type: Broadcast Receive State (0x2bc8) * ATT: Read Response (0x0b) len 0 * Handle: 0x0006 Broadcast Receive State (0x2bc8) */ #define BASS_READ_BCAST_RECV_STATE_CHARS \ IOV_DATA(0x0a, 0x03, 0x00), \ IOV_DATA(0x0b), \ IOV_DATA(0x0a, 0x06, 0x00), \ IOV_DATA(0x0b) #define BASS_CP_WRITE_CMD(_op, _args...) \ IOV_DATA(0x52, 0x09, 0x00, _op, _args) #define BASS_CP_WRITE_REQ(_op, _args...) \ IOV_DATA(0x12, 0x09, 0x00, _op, _args) /* ATT: Write Command (0x52) len 19 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0401693C4572685526613465597073275455 * Opcode: Set Broadcast_Code * Source_ID: 1 * Broadcast_Code: 0x55542773705965346126556872453c69 * ATT: Write Command (0x52) len 2 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0501 * Opcode: Remove Source * Source_ID: 1 */ #define IGNORE_INVALID_SRC_ID \ EXCHANGE_MTU, \ BASS_FIND_BY_TYPE_VALUE, \ DISC_BASS_CHAR, \ BASS_FIND_INFO, \ BASS_WRITE_CHAR_DESC, \ BASS_READ_BCAST_RECV_STATE_CHARS, \ BASS_CP_WRITE_CMD(0x04, 0x01, 0x69, 0x3C, 0x45, 0x72, 0x68, \ 0x55, 0x26, 0x61, 0x34, 0x65, 0x59, 0x70, \ 0x73, 0x27, 0x54, 0x55), \ IOV_NULL, \ BASS_CP_WRITE_CMD(0x05, 0x01) /* ATT: Write Command (0x52) len 26 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0200F2698BE807C0003412000610270200000000000000000000 * Opcode: Add Source * Advertiser_Address_Type: Public Device or Public Identity Address * Advertiser_Address: c0:07:e8:8b:69:f2 * Advertising_SID: 0x00 * Broadcast_ID: 0x001234 * PA_Sync: 0x06 (Reserved for Future Use) * PA_Interval: 0x2710 * Num_Subgroups: 2 * Subgroup #0: * BIS_Sync: 00000000000000000000000000000000 * Metadata_Length: 0 * Subgroup #1: * BIS_Sync: 00000000000000000000000000000000 * Metadata_Length: 0 * ATT: Write Command (0x52) len 26 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0205F2698BE807C0003412000210270200000000000000000000 * Opcode: Add Source * Advertiser_Address_Type: 0x05 (Reserved for Future Use) * Advertiser_Address: c0:07:e8:8b:69:f2 * Advertising_SID: 0x00 * Broadcast_ID: 0x001234 * PA_Sync: Synchronize to PA (PAST not available) * PA_Interval: 0x2710 * Num_Subgroups: 2 * Subgroup #0: * BIS_Sync: 00000000000000000000000000000000 * Metadata_Length: 0 * Subgroup #1: * BIS_Sync: 00000000000000000000000000000000 * Metadata_Length: 0 * ATT: Write Command (0x52) len 26 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0200F2698BE807C0003412000210270201000000000100000000 * Opcode: Add Source * Advertiser_Address_Type: Public Device or Public Identity Address * Advertiser_Address: c0:07:e8:8b:69:f2 * Advertising_SID: 0x00 * Broadcast_ID: 0x001234 * PA_Sync: Synchronize to PA (PAST not available) * PA_Interval: 0x2710 * Num_Subgroups: 2 * Subgroup #0: * BIS_Sync: 00000000000000000000000000000001 * Metadata_Length: 0 * Subgroup #1: * BIS_Sync: 00000000000000000000000000000001 * Metadata_Length: 0 */ #define ADD_SRC_INVALID_PARAMS \ EXCHANGE_MTU, \ BASS_FIND_BY_TYPE_VALUE, \ DISC_BASS_CHAR, \ BASS_FIND_INFO, \ BASS_WRITE_CHAR_DESC,\ BASS_READ_BCAST_RECV_STATE_CHARS, \ BASS_CP_WRITE_CMD(0x02, 0x00, 0xF2, 0x69, 0x8B, 0xE8, 0x07, 0xC0, \ 0x00, 0x34, 0x12, 0x00, 0x06, 0x10, 0x27, 0x02, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00), \ IOV_NULL, \ BASS_CP_WRITE_CMD(0x02, 0x05, 0xF2, 0x69, 0x8B, 0xE8, 0x07, 0xC0, \ 0x00, 0x34, 0x12, 0x00, 0x02, 0x10, 0x27, 0x02, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00), \ IOV_NULL, \ BASS_CP_WRITE_CMD(0x02, 0x05, 0xF2, 0x69, 0x8B, 0xE8, 0x07, 0xC0, \ 0x3F, 0x34, 0x12, 0x00, 0x02, 0x10, 0x27, 0x02, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00), \ IOV_NULL, \ BASS_CP_WRITE_CMD(0x02, 0x00, 0xF2, 0x69, 0x8B, 0xE8, 0x07, 0xC0, \ 0x00, 0x34, 0x12, 0x00, 0x02, 0x10, 0x27, 0x02, \ 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, \ 0x00, 0x00) /* ATT: Write Request (0x12) len 3 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: FF * Opcode: 0xff (Reserved For Future Use) * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Opcode Not Supported (0x80) */ #define OPCODE_NOT_SUPPORTED \ EXCHANGE_MTU, \ BASS_FIND_BY_TYPE_VALUE, \ DISC_BASS_CHAR, \ BASS_FIND_INFO, \ BASS_WRITE_CHAR_DESC,\ BASS_READ_BCAST_RECV_STATE_CHARS, \ BASS_CP_WRITE_REQ(0xFF), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0x80) /* ATT: Write Request (0x12) len 5 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 006dfe * Opcode: Remote Scan Stopped * Extra Data: 0xfe6d * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Write Request Rejected (0xFC) * ATT: Write Request (0x12) len 5 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 006dfe * Opcode: Remote Scan Started * Extra Data: 0xa2c2 * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Write Request Rejected (0xFC) * ATT: Write Request (0x12) len 25 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0200F2698BE807C0003412000210270100000000000000 * Opcode: Add Source * Advertiser_Address_Type: Public Device or Public Identity Address * Advertiser_Address: c0:07:e8:8b:69:f2 * Advertising_SID: 0x00 * Broadcast_ID: 0x001234 * PA_Sync: Synchronize to PA (PAST not available) * PA_Interval: 0x2710 * Num_Subgroups: 1 * Subgroup #0: * BIS_Sync: 00000000000000000000000000000001 * Metadata_Length: 0 * Extra Data: 0x0000 * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Write Request Rejected (0xFC) * ATT: Write Request (0x12) len 13 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 03000210270100000000001500 * Opcode: Modify Source * Source_ID: 0x00 * PA_Sync: Synchronize to PA (PAST not available) * PA_Interval: 0x2710 * Num_Subgroups: 1 * Subgroup #0: * BIS_Sync: 00000000000000000000000000000001 * Metadata_Length: 0 * Extra Data: 0x0015 * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Write Request Rejected (0xFC) * ATT: Write Request (0x12) len 20 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0400B803EAC6AFBB65A25A41F153056802010000 * Opcode: Set Broadcast_Code * Source_ID: 0x00 * Broadcast_Code: 0x0102680553f1415aa265bbafc6ea03b8 * Extra Data: 0x0000 * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Write Request Rejected (0xFC) * ATT: Write Request (0x12) len 4 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 05008F13 * Opcode: Remove Source * Source_ID: 0x00 * Extra Data: 0x138f * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Write Request Rejected (0xFC) */ #define INVALID_LEN \ EXCHANGE_MTU, \ BASS_FIND_BY_TYPE_VALUE, \ DISC_BASS_CHAR, \ BASS_FIND_INFO, \ BASS_WRITE_CHAR_DESC,\ BASS_READ_BCAST_RECV_STATE_CHARS, \ BASS_CP_WRITE_REQ(0x00, 0x6D, 0xFE), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0xFC), \ BASS_CP_WRITE_REQ(0x01, 0xC2, 0xA2), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0xFC), \ BASS_CP_WRITE_REQ(0x02, 0x00, 0xF2, 0x69, 0x8B, 0xE8, 0x07, 0xC0, \ 0x00, 0x34, 0x12, 0x00, 0x02, 0x10, 0x27, 0x01, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0xFC), \ BASS_CP_WRITE_REQ(0x03, 0x00, 0x02, 0x10, 0x27, 0x01, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x15, 0x00), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0xFC), \ BASS_CP_WRITE_REQ(0x04, 0x00, 0xB8, 0x03, 0xEA, 0xC6, 0xAF, 0xBB, \ 0x65, 0xA2, 0x5A, 0x41, 0xF1, 0x53, 0x05, 0x68, \ 0x02, 0x01, 0x00, 0x00), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0xFC), \ BASS_CP_WRITE_REQ(0x05, 0x00, 0x8F, 0x13), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0xFC) /* ATT: Write Request (0x12) len 20 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 0400B803EAC6AFBB65A25A41F153056802010000 * Opcode: Set Broadcast_Code * Source_ID: 0x05 * Broadcast_Code: 0x0102680553f1415aa265bbafc6ea03b * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Invalid Source ID (0x81) * ATT: Write Request (0x12) len 4 * Handle: 0x0009 Type: Broadcast Audio Scan Control Point (0x2bc7) * Data: 005 * Opcode: Remove Source * Source_ID: 0x05 * ATT: Error Response (0x01) len 4 * Write Request (0x12) * Handle: 0x0009 * Error: Invalid Source ID (0x81) */ #define INVALID_SRC_ID \ EXCHANGE_MTU, \ BASS_FIND_BY_TYPE_VALUE, \ DISC_BASS_CHAR, \ BASS_FIND_INFO, \ BASS_WRITE_CHAR_DESC, \ BASS_READ_BCAST_RECV_STATE_CHARS, \ BASS_CP_WRITE_REQ(0x04, 0x05, 0xB8, 0x03, 0xEA, 0xC6, 0xAF, 0xBB, \ 0x65, 0xA2, 0x5A, 0x41, 0xF1, 0x53, 0x05, 0x68, \ 0x02, 0x01), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0x81), \ BASS_CP_WRITE_REQ(0x05, 0x05), \ IOV_DATA(0x01, 0x12, 0x09, 0x00, 0x81) #define iov_data(args...) ((const struct iovec[]) { args }) #define define_test(name, function, _cfg, args...) \ do { \ const struct iovec iov[] = { args }; \ static struct test_data data; \ data.iovcnt = ARRAY_SIZE(iov_data(args)); \ data.iov = util_iov_dup(iov, ARRAY_SIZE(iov_data(args))); \ tester_add(name, &data, NULL, function, \ test_teardown); \ } while (0) static void test_complete_cb(const void *user_data) { tester_test_passed(); } static void print_debug(const char *str, void *user_data) { const char *prefix = user_data; if (tester_use_debug()) tester_debug("%s%s", prefix, str); } static void test_teardown(const void *user_data) { struct test_data *data = (void *)user_data; bt_bass_unref(data->bass); bt_gatt_server_unref(data->server); util_iov_free(data->iov, data->iovcnt); gatt_db_unref(data->db); queue_destroy(data->ccc_states, free); tester_teardown_complete(); } static bool ccc_state_match(const void *a, const void *b) { const struct ccc_state *ccc = a; uint16_t handle = PTR_TO_UINT(b); return ccc->handle == handle; } static struct ccc_state *find_ccc_state(struct test_data *data, uint16_t handle) { return queue_find(data->ccc_states, ccc_state_match, UINT_TO_PTR(handle)); } static struct ccc_state *get_ccc_state(struct test_data *data, uint16_t handle) { struct ccc_state *ccc; ccc = find_ccc_state(data, handle); if (ccc) return ccc; ccc = new0(struct ccc_state, 1); ccc->handle = handle; queue_push_tail(data->ccc_states, ccc); return ccc; } static void gatt_ccc_read_cb(struct gatt_db_attribute *attrib, unsigned int id, uint16_t offset, uint8_t opcode, struct bt_att *att, void *user_data) { struct test_data *data = user_data; struct ccc_state *ccc; uint16_t handle; uint8_t ecode = 0; const uint8_t *value = NULL; size_t len = 0; handle = gatt_db_attribute_get_handle(attrib); ccc = get_ccc_state(data, handle); if (!ccc) { ecode = BT_ATT_ERROR_UNLIKELY; goto done; } len = sizeof(ccc->value); value = (void *) &ccc->value; done: gatt_db_attribute_read_result(attrib, id, ecode, value, len); } static void gatt_ccc_write_cb(struct gatt_db_attribute *attrib, unsigned int id, uint16_t offset, const uint8_t *value, size_t len, uint8_t opcode, struct bt_att *att, void *user_data) { struct test_data *data = (void *)user_data; struct ccc_state *ccc_state; uint16_t val; uint8_t ecode = 0; if (!value || len > 2) { ecode = BT_ATT_ERROR_INVALID_ATTRIBUTE_VALUE_LEN; goto done; } if (offset > 2) { ecode = BT_ATT_ERROR_INVALID_OFFSET; goto done; } if (len == 1) val = *value; else val = get_le16(value); ccc_state = get_ccc_state(data, gatt_db_attribute_get_handle(attrib)); if (!ccc_state) return; /* If value is identical, then just succeed */ if (val == ccc_state->value) goto done; ccc_state->value = val; done: gatt_db_attribute_write_result(attrib, id, ecode); } static void gatt_notify_cb(struct gatt_db_attribute *attrib, struct gatt_db_attribute *ccc, const uint8_t *value, size_t len, struct bt_att *att, void *user_data) { struct test_data *data = user_data; struct ccc_state *ccc_state; ccc_state = find_ccc_state(data, gatt_db_attribute_get_handle(ccc)); if (!ccc_state || !(ccc_state->value & 0x0001)) return; bt_gatt_server_send_notification(data->server, gatt_db_attribute_get_handle(attrib), value, len, false); } static void test_server(const void *user_data) { struct test_data *data = (void *)user_data; struct bt_att *att; struct io *io; io = tester_setup_io(data->iov, data->iovcnt); g_assert(io); tester_io_set_complete_func(test_complete_cb); att = bt_att_new(io_get_fd(io), false); g_assert(att); bt_att_set_debug(att, BT_ATT_DEBUG, print_debug, "bt_att:", NULL); data->db = gatt_db_new(); g_assert(data->db); gatt_db_ccc_register(data->db, gatt_ccc_read_cb, gatt_ccc_write_cb, gatt_notify_cb, data); data->bass = bt_bass_new(data->db, NULL, BDADDR_ANY); g_assert(data->bass); bt_bass_set_att(data->bass, att); bt_bass_attach(data->bass, NULL); bt_bass_set_debug(data->bass, print_debug, "bt_bass:", NULL); data->server = bt_gatt_server_new(data->db, att, 64, 0); g_assert(data->server); bt_gatt_server_set_debug(data->server, print_debug, "bt_gatt_server:", NULL); data->ccc_states = queue_new(); tester_io_send(); bt_att_unref(att); } static void test_sggit(void) { /* BASS/SR/SGGIT/SER/BV-01-C [Service GGIT - Broadcast Scan] * * For each ATT_Read_By_Group_Type_Request, the IUT sends a correctly * formatted ATT_Read_By_Group_Type_Response reporting BASS to the * Lower Tester, or an ATT_Error_Response if there is no handle/UUID * pair matching the request. * * For each ATT_Find_By_Type_Value_Request, the IUT sends one * ATT_Find_By_Type_Value_Response reporting BASS to the Lower Tester, * or an ATT_Error_Response when there are no more services matching * the request. * * The IUT sends one ATT_Read_By_Type_Response to the Lower Tester for * each received ATT_Read_By_Type_Request, if it has characteristic * declarations within the handle range, or an ATT_Error_Response if * there are no further characteristic declarations within the * handle range of the request. The IUT reports all BASS * characteristics. */ define_test("BASS/SR/SGGIT/SER/BV-01-C", test_server, NULL, DISC_BASS_SER); /* BASS/SR/SGGIT/CHA/BV-01-C [Service GGIT - * Broadcast Audio Scan Control Point] * * The IUT sends one ATT_Read_By_Type_Response to the Lower Tester for * each received ATT_Read_By_Type_Request, if it has characteristic * declarations within the handle range, or an ATT_Error_Response if * there are no further characteristic declarations within the * handle range of the request. The IUT reports one instance of the * Broadcast Audio Scan Control Point characteristic. */ define_test("BASS/SR/SGGIT/CHA/BV-01-C", test_server, NULL, DISC_BCAST_AUDIO_SCAN_CP); /* BASS/SR/SGGIT/CHA/BV-02-C [Service GGIT - * Broadcast Receive State] * * The IUT sends one ATT_Read_By_Type_Response to the Lower Tester for * each received ATT_Read_By_Type_Request, if it has characteristic * declarations within the handle range, or an ATT_Error_Response if * there are no further characteristic declarations within the * handle range of the request. The IUT reports two instances of the * Broadcast Receive State characteristic. * * The IUT sends one ATT_Find_Information_Response to the Lower Tester * for each received ATT_Find_Information_Request, if it has * characteristic descriptors within the handle range, or an * ATT_Error_Response if there are no characteristic descriptors within * the handle range of the request. For each Broadcast Receive State * characteristic, the IUT reports one Client Characteristic * Configuration descriptor. * * The IUT sends an ATT_Read_Response to the Lower Tester for each * ATT_Read_Request. */ define_test("BASS/SR/SGGIT/CHA/BV-02-C", test_server, NULL, DISC_BCAST_RECV_STATE); } static void test_spe(void) { /* BASS/SR/SPE/BI-01-C [Ignore Invalid Source ID] * * Test Purpose: * Verify that the BASS Server IUT does not respond to a control point * procedure call that uses an invalid Source_ID parameter. * * Pass verdict: * The IUT does not send a notification of the Broadcast Receive State * characteristic. */ define_test("BASS/SR/SPE/BI-01-C", test_server, NULL, IGNORE_INVALID_SRC_ID); /* BASS/SR/SPE/BI-03-C [Add Source - Ignore Invalid Values] * * Test Purpose: * Verify that the BASS Server IUT ignores Add Source control point * procedure calls that include an RFU or Invalid parameter. * * Pass verdict: * The IUT does not send a notification of the Broadcast Receive State * characteristic. */ define_test("BASS/SR/SPE/BI-03-C", test_server, NULL, ADD_SRC_INVALID_PARAMS); /* BASS/SR/SPE/BI-04-C [Opcode Not Supported] * * Test Purpose: * Verify that the BASS Server IUT returns an Opcode Not Supported error * response when the opcode written is not supported by the IUT or is * within a range that is reserved for future use being written to the * Broadcast Audio Scan Control Point. * * Pass verdict: * The IUT sends an error response of OPCODE NOT SUPPORTED. */ define_test("BASS/SR/SPE/BI-04-C", test_server, NULL, OPCODE_NOT_SUPPORTED); /* BASS/SR/SPE/BI-06-C [Invalid Length] * * Test Purpose: * Verify that the BASS Server IUT rejects writing of an opcode with * an invalid length. * * Pass verdict: * The IUT rejects the opcode. */ define_test("BASS/SR/SPE/BI-06-C", test_server, NULL, INVALID_LEN); /* BASS/SR/SPE/BI-07-C [Invalid Source ID] * * Test Purpose: * Verify that the BASS Server IUT returns an error when a control * point procedure passing an invalid Source_ID parameter is called. * * Pass verdict: * The IUT sends an ATT Error Response with the Error Code set to * Invalid Source_ID. */ define_test("BASS/SR/SPE/BI-07-C", test_server, NULL, INVALID_SRC_ID); } int main(int argc, char *argv[]) { tester_init(&argc, &argv); test_sggit(); test_spe(); return tester_run(); }