korg/bluez
0
0
Fork 0
mirror of https://git.kernel.org/pub/scm/bluetooth/bluez.git synced 2025-01-19 10:05:09 +08:00
Code Issues Packages Projects Releases Wiki Activity
13,023 Commits 1 Branch 320 Tags 41 MiB
dd106b1734
Commit Graph

875 Commits

Author SHA1 Message Date
Lucas De Marchi
b84f6f794b build-sys: Define _GNU_SOURCE in config.h 
Instead of defining _GNU_SOURCE in each source file (and potentially
forgetting in some), tell the build system we use extensions and let it
define _GNU_SOURCE in config.h.
 2012-12-05 17:17:36 +02:00
Luiz Augusto von Dentz
36803c249d gobex: tools: Fix using BT_IO_TYPE in test-client and test-server 2012-12-04 22:22:07 +01:00
Michał Poczwardowski
77a7ad6ae1 gobex: tools: Fix test-client error message put/get typo 2012-12-04 22:22:06 +01:00
Marcel Holtmann
cd8a24b9fa gobex: build: Remove glib-helper.h support 2012-12-04 22:22:06 +01:00
Luiz Augusto von Dentz
9e1e47425e gobex: tools: Fix test-server to use ERTM while on packet mode 
OBEX should only be used with ERTM over L2CAP and set MTU properly
 2012-12-04 22:22:05 +01:00
Luiz Augusto von Dentz
26ce1d484f gobex: tools: Fix test-client to use ERTM while on packet mode 
OBEX should only be used with ERTM over L2CAP and set MTU properly
 2012-12-04 22:22:05 +01:00
Luiz Augusto von Dentz
ae33bcb8a4 gobex: tools: Make test-server to use ERTM 
If port is bigger than 31 and stream mode is selected then use ERTM
 2012-12-04 22:22:05 +01:00
Luiz Augusto von Dentz
2a94607646 gobex: tools: Make test-client use ERTM 
If port is bigger than 31 and stream mode is selected then use ERTM
 2012-12-04 22:22:05 +01:00
Johan Hedberg
1c2da64348 gobex: Remove g_obex_packet_find_header 
This was exactly the same as g_obex_packet_get_header.
 2012-12-04 22:22:03 +01:00
Luiz Augusto von Dentz
68bd9dd92b gobex: add option to set input/output MTU to test-server 2012-12-04 22:22:02 +01:00
Luiz Augusto von Dentz
701f8845b5 gobex: add option to set input/output MTU to test-client 2012-12-04 22:22:02 +01:00
Luiz Augusto von Dentz
971be76c62 gobex: add root support to test-server 2012-12-04 22:22:02 +01:00
Luiz Augusto von Dentz
2c5bb3ec41 gobex: Add Bluetooth support for test-server 2012-12-04 22:22:02 +01:00
Luiz Augusto von Dentz
7e7a99b039 gobex: Add Bluetooth support for test-client 2012-12-04 22:22:02 +01:00
Syam Sidhardhan
cb6fe44ba1 gobex: Remove bogus extra semicolons 2012-12-04 22:22:02 +01:00
Daniele Forsi
f64fe4f401 gobex: Fix compilation when NEED_G_SLIST_FREE_FULL is defined 
To use the replacement for g_slist_free_full() both compat.h and
glib-helper.h need to be included.

Fixes:
gobex/gobex.c:911: error: implicit declaration of function 'g_slist_free_full'
tools/obex-server-tool.c:344: error: implicit declaration of function ‘g_slist_free_full’
 2012-12-04 22:22:02 +01:00
Luiz Augusto von Dentz
c1b8f95c2a gobex: Make use of g_slist_free_full when elements are dynamically-allocated 
This avoid having to iterate twice in the list to free its elements.
 2012-12-04 22:22:02 +01:00
Johan Hedberg
3352a36c11 gobex: Allow g_obex_send_rsp to take custom headers 2012-12-04 22:22:01 +01:00
Johan Hedberg
ddb69649e8 gobex: Merge gobex-transfer.h into gobex.h 2012-12-04 22:22:01 +01:00
Johan Hedberg
562f84396b gobex: Fix missing newline in test-server error log 2012-12-04 22:22:01 +01:00
Johan Hedberg
d713e186e5 gobex: Add g_obex_send_rsp convenience function 2012-12-04 22:22:01 +01:00
Johan Hedberg
0e2afe102e gobex: Fix test-server/client file creation mode 2012-12-04 22:22:01 +01:00
Johan Hedberg
14d2bde30d gobex: Add Get support to test-client and test-server 2012-12-04 22:22:01 +01:00
Johan Hedberg
c869ca28b8 gobex: Make use of va-args headers in higher level functions 2012-12-04 22:22:01 +01:00
Johan Hedberg
815218c7ef gobex: Make transfer functions take va-args header lists 2012-12-04 22:22:01 +01:00
Johan Hedberg
58cd14d209 gobex: Remove _ID_ from header type definitions 2012-12-04 22:22:01 +01:00
Johan Hedberg
cdcde59687 gobex: Add va-args based packet creation support 2012-12-04 22:22:01 +01:00
Johan Hedberg
bfb84a44a7 gobex: Add put streaming support to test-server 2012-12-04 22:21:59 +01:00
Johan Hedberg
f25c695d22 gobex: Print more informative disconnect message in test-client 2012-12-04 22:21:59 +01:00
Johan Hedberg
10dfec83a1 gobex: Rename g_obex_put to g_obex_put_req 2012-12-04 22:21:59 +01:00
Johan Hedberg
d2c30f5c78 gobex: Update test-server to use per-opcode request handlers 2012-12-04 22:21:59 +01:00
Johan Hedberg
6cfe881554 gobex: Add basic put request parsing to test-server 2012-12-04 22:21:59 +01:00
Johan Hedberg
49514b2cc4 gobex: Track last received request internally and remove g_obex_response 2012-12-04 22:21:59 +01:00
Johan Hedberg
b1cc9a1269 gobex: Add support for put transfer in test-client 2012-12-04 22:21:59 +01:00
Johan Hedberg
bc076f8437 gobex: Add proper responses to all requests in test-server 2012-12-04 22:21:59 +01:00
Johan Hedberg
2e49852cce gobex: Use opcode instead of entire req in g_obex_response 2012-12-04 22:21:59 +01:00
Johan Hedberg
26f20b39af gobex: Use g_obex_respose in test-server 2012-12-04 22:21:58 +01:00
Johan Hedberg
9714844c66 gobex: Add request callback to test-server 2012-12-04 22:21:58 +01:00
Johan Hedberg
6bca789ddd gobex: Add connect command to test-client 2012-12-04 22:21:58 +01:00
Johan Hedberg
abbfdb3aa2 gobex: Add readline support to test-client 2012-12-04 22:21:58 +01:00
Johan Hedberg
f817405d04 gobex: Add basic skeleton for test-client 2012-12-04 22:21:58 +01:00
Johan Hedberg
d0903aa407 gobex: Fix test-server server socket leak 2012-12-04 22:21:58 +01:00
Johan Hedberg
3ccda2440d gobex: Add some basic command line options to test-server 2012-12-04 22:21:58 +01:00
Johan Hedberg
7afc5a6f90 gobex: g_obex_new should create its own GIOChannel ref 2012-12-04 22:21:58 +01:00
Johan Hedberg
0b362843b0 gobex: Add per-client tracking to test-server 2012-12-04 22:21:58 +01:00
Johan Hedberg
552823f60b gobex: Add a skeleton for a test server 2012-12-04 22:21:58 +01:00
Johan Hedberg
a036d5febc btsnoop: _GNU_SOURCE is needed for O_CLOEXEC on some systems 2012-11-28 16:36:08 +02:00
Johan Hedberg
e24537ba87 btsnoop: Fix missing sys/stat.h include needed by S_IRUSR 2012-11-28 16:30:23 +02:00
Johan Hedberg
044d567a4d sdptool: Add missing UUID entries for MAP and HSP 2012-11-23 14:34:18 +02:00
Jefferson Delfes
f078cf5c75 hciconfig: Add an option to set which advertise type will be on 
There are some advertise types that can be used, so we need a way to
tell which one we want. The default one is ADV_IND.
 2012-11-22 10:13:20 +02:00
Marcel Holtmann
ce06826bd7 build: Remove stupid -I directives 2012-11-20 16:12:51 +01:00
Johan Hedberg
b27b7757d4 mgmt: Remove peripheral setting 
It's still not decided how this will be exposed in the end but most
likely it wont be through mgmt (e.g. socket-based enabling is a probable
choice).
 2012-11-09 16:52:48 +02:00
Marcel Holtmann
2a7af79ba0 build: Remove unused ppporc utility 2012-11-09 10:31:28 +01:00
Marcel Holtmann
aabb7b93d8 build: Remove unused dfubabel utility 2012-11-09 10:19:44 +01:00
Marcel Holtmann
4db071a155 build: Remove unused avctrl utility 2012-11-09 10:11:14 +01:00
Johan Hedberg
127a07fd0d btmgmt: Fix rm-uuid command 2012-11-08 11:24:45 +02:00
Marcel Holtmann
f2ddf39023 tools: Add simple btattach utility 2012-11-07 10:51:01 +01:00
Johan Hedberg
ce084da2e7 btsnoop: Fix signedness compilation errors 
This patch fixes the following signedness comparison errors:

tools/btsnoop.c: In function 'command_merge':
tools/btsnoop.c:221:21: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
tools/btsnoop.c:263:14: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
 2012-11-06 19:05:46 +02:00
Marcel Holtmann
d67a5c26b1 tools: Add tool for merging multiple btsnoop traces into one 2012-11-04 21:50:46 +01:00
Frédéric Danis
566ef74749 hcitool: Retrieve names from cache directory 2012-10-31 11:05:30 +02:00
Marcel Holtmann
2c33d253f5 hciattach: Allow creating AMP controller over UART 2012-10-29 15:48:52 -07:00
Johan Hedberg
d6ff55181b mgmt: Remove LE prefix from the peripheral setting 2012-10-22 18:47:43 +03:00
Johan Hedberg
1b0a4291d1 mgmt: Add support for LE peripheral mode 2012-10-22 17:36:51 +03:00
Johan Hedberg
f45ee9ff35 btmgmt: Add basic EIR parsing 2012-10-22 17:36:38 +03:00
Chan-yeol Park
fa33166bd1 avinfo: Print a2dp vendor codec info 2012-10-09 23:27:51 +02:00
Chan-yeol Park
3be965ebea avinfo: Replace definitions with a2dp-codecs.h's 2012-10-09 23:27:51 +02:00
Szymon Janc
6026d2ebd2 hciconfig: Clarify what oobdata command do 
oobdata command results in reading new local OOB data and invalidates
previously read data. Current command description is misleading.
 2012-09-28 16:51:23 +03:00
Claudio Takahasi
30529a58b0 hcitool: Add LE scan based on White List 
This patch extends the LE scanning command allowing the user to inform
an option to enable LE scanning detecting advertises sent from devices
in the White List Only. This option can be used combined with others.
 2012-09-06 17:32:34 +03:00
Anderson Lizardo
78889501f8 Fix trivial coding style issues on pointer declarations and casting 
Avoid using C++ style pointer declarations like "char* ptr", as most
BlueZ code uses "char *ptr".
 2012-08-26 09:37:06 +01:00
Mikel Astiz
902e9f2de2 mgmt: Add reason to device disconnect event 
Extend the management API with the disconnect reason, as now reported
by the Kernel in MGMT_EV_DEVICE_DISCONNECTED.
 2012-08-17 12:26:30 +03:00
Anderson Lizardo
6ade0ff7a2 btmgmt: Fix endianness conversion 
Flags field has 32-bit size. Same issue was fixed for mgmtops in
1801a4d45d.
 2012-08-13 13:26:54 +03:00
Lucas De Marchi
b96925739d rfcomm: Fix typo in man page 2012-08-09 22:52:38 -07:00
Lucas De Marchi
5bec57420b rfcomm: Remove support for configuration file 2012-08-09 22:52:38 -07:00
Lucas De Marchi
dde5b23665 rfcomm: Fix checking return value instead of errno 
We were checking by a positive return value instead of checking by -1
and errno. However when there's no support for TTY kernel returns
EOPNOTSUPP as usual, which in the end will have a return value of -1
and errno will be set to EOPNOTSUPP.
 2012-08-09 22:52:37 -07:00
Gustavo Padovan
2f5f6a5de0 btmgmt: move it to tools 2012-07-10 11:20:34 -03:00
Tedd Ho-Jeong AN
4a3f496862 hciattach: fix return length after reading the patch file 
This patch fixes the issue that returns always 0 after reading the patch
line.
 2012-07-04 15:39:54 +03:00
Pavel Raiskup
c0d81fcfbf sdptool: Fix dropping of the list head 
assigning sdp_list_append(0, ...) to "apseq" on line 2591 will
drop first item in list got by sdp_list_append three lines before.
 2012-06-28 14:51:09 +03:00
Johan Hedberg
3e53b3862c hciattach: Add basic Three-wire UART support 2012-05-31 15:06:19 +03:00
Tom Gundersen
35beaaa5b3 udev: remove deprecated function 
This function has in the past returned "/sys" unconditionally. As of
udev-183 it is gone, so just replace it with the string.
 2012-05-27 22:35:59 +03:00
Tedd Ho-Jeong An
8d25f9528b hciattach: Add support for Intel Bluetooth device 
This patch enables the Intel Bluetooth device (UART sku) over the H4
protocol.  It is responsible for bring up the device into known state by
configuring the baudrate and applying the patches, if required.
 2012-05-16 10:36:20 +03:00
Anderson Lizardo
ff794ffae4 tools: Fix tab misuse 2012-05-10 16:43:16 -07:00
Johan Hovold
870fb2619d csr_bcsp: fix link establishment 
The current link-establishment implementation times out if a packet is
not received after the link is active (i.e. reception of CONF_RESP).

Fix by making sure that the link establishment loop in open is
terminated when ubcsp sets the UBCSP_PACKET_SENT flag (on reception of
CONF_RESP) rather than UBCSP_PACKET_RECEIVED (on reception of any later
packages).
 2012-05-10 16:39:57 -07:00
Szymon Janc
e26b01d25b Move common code to sdp to avoid duplication 
LanguageBaseAttributeIDList is set from few places and each time static
function was copied and used for that. Move this funtion to sdp code
and use that instead of copying code.
 2012-03-28 13:17:39 +03:00
Marcel Holtmann
f30c71d3e0 hciattach: Remove some unneeded includes 2012-02-26 18:40:25 -08:00
Marcel Holtmann
061a23ca74 hciattach: Add new HCI UART flags 2012-02-26 18:40:25 -08:00
Vinicius Costa Gomes
a7be2034ca hciconfig: Fix compiler warnings related to unaligned memory access 2012-02-14 14:39:15 +02:00
Vinicius Costa Gomes
4725ddffe2 hciconfig: Fix using old-style initializers 2012-02-14 14:39:05 +02:00
Vinicius Costa Gomes
42dc0063e4 tools: Fix using old-style initializers 2012-02-14 14:28:58 +02:00
Luiz Augusto von Dentz
21da0977bb sdptool: Add GoepL2capPsm decoding support 2012-02-07 12:34:12 +02:00
Andrei Emeltchenko
efe0957092 hciconfig: Print features for AMP devices 
Check for HCI device type, the magic shift is due to dev type is packed
to dev_info type.
 2011-12-08 11:39:40 +02:00
Anderson Lizardo
e40bc80bf5 csr_bcsp: Fix missing errno attribution 
do_command() is supposed to set errno if returning -1.
 2011-11-17 13:57:53 +02:00
Anderson Lizardo
7232da34fa bccmd: Fix overwriting errno value 
On error, transport_read() returns -1 and sets errno.
 2011-11-17 13:57:53 +02:00
Anderson Lizardo
382c867b09 hciconfig: Fix errno handling convention 
Variables which are assigned to the errno variable (usually called
"err") should be negative, and "-err" should be used where a positive
value is needed.
 2011-11-17 13:57:53 +02:00
Anderson Lizardo
100527bd5a hcitool: Fix errno handling convention 
Variables which are assigned to the errno variable (usually called
"err") should be negative, and "-err" should be used where a positive
value is needed.
 2011-11-17 13:57:53 +02:00
Johan Hedberg
6ecbffae1d hcitool: Fix EIR parsing 
There were missing buffer size checks and wrong assumptions about the
EIR data length (core spec 4.0 defines it to be max 31 bytes, so the
name can be max 29 bytes).
 2011-10-14 14:23:05 +03:00
Vinicius Costa Gomes
402398c7dc Add support for parsing the remote name during LE Scan 2011-10-14 10:48:07 +03:00
Vinicius Costa Gomes
6c85d28c8e Add support for cancelling a LE Scan with Control-C 2011-10-07 19:55:42 +03:00
Johan Hedberg
d9ae5bead2 Filter duplicates by default with hcitool lescan 2011-10-03 15:16:24 +03:00
Yegor Yefremov
2f440ad7b5 hciattach: fix serial speed setting for wl1271 
override speed setting if firmware script issues serial settings command,
otherwise the value given in the firmware script will be overridden.

Example:

hciattach /dev/ttyO1 texas 115200

will fail, because /dev/ttyO1 will be opened with 115200 b/s, then
the firmware script will set the buadrate to 3000000 b/s, after UART init
hciattach.c will set the baudrate to 115200, so communication is broken.

The only correct way is to set both speeds:

hciattach -s 115200 /dev/ttyO1 texas 3000000

With this patch only initial speed must be specified. The former semantic
will be preserved in case the firmware script doesn't provide serial
settings action.

Tested with wl1271 and firmware TIInit_7.2.31.bts
 2011-09-22 20:19:11 +09:00
Lucas De Marchi
fcb426c76a Fix common misspelled words 
Accounting of misspelled words, as detected by codespell:

acording      2
ancilliary    1
appropiate    1
atribute      1
cant          1
comming       2
gracefull     1
lenght        1
mispelled     1
occured       1
occurences    1
ocurred       3
prefered      1
presense      1
reponse       1
seperate      1
succesful     1
successully   1
sucessfull    1
sucessfully   1
 2011-07-03 14:36:14 +03:00
Slawomir Bochenski
f8e0916e2d Remove unnecessary jumps 2011-06-01 14:41:01 +03:00
Szymon Janc
8af5f43a69 Fix empty parameter list in functions declarations 2011-05-18 09:05:55 -07:00
Johan Hedberg
2076574365 Fix unused variable warnings reported by GCC 4.6 2011-05-15 01:57:12 +03:00
Szymon Janc
11e433f53e Fix redundant null check on calling free() 2011-05-15 01:47:06 +03:00
Johan Hedberg
4ae0fb61c2 Fix minor coding style issues in hid2hci 2011-04-28 12:57:56 -07:00
Kay Sievers
94b0a8f405 Update hid2hci tool from udev codebase 2011-04-28 12:54:31 -07:00
Bruna Moreira
cef8838500 Use HCI_MAX_EIR_LENGTH instead of hard-coded value 2011-04-27 16:25:02 -07:00
Johan Hedberg
3b9b749946 Fix LMP version string in hciconfig 
Previously the HCI version was reported instead of the LMP one.

Reported-by: Arno Willig <akw@thinkwiki.org>
 2011-03-28 15:42:23 +03:00
Marco Sinigaglia
39454251ef Adjust LE command timeout and API 
The timeout value has been hardcoded on hci_send_req call and, instead,
it should be passed from above (for ex from hci_le_set_scan_enable).
This patch removes the hardcoded value from hci_send_req and it
increases the timeout to 1000ms.
 2011-03-10 11:11:17 +02:00
Claudio Takahasi
dc920afdf5 hcitool: add "whitelist" option to create LE connections 
If "whitelist" option is given, the peer address and type will be
ignored and the white list will be used to determine which advertiser
to connect to.
 2011-03-04 16:45:50 -03:00
Claudio Takahasi
81a57bd00d hcitool: add random address type to LE Add to White List 2011-03-04 16:45:28 -03:00
Claudio Takahasi
3f6465163d hcitool: use defined constants for address type 2011-03-04 16:45:11 -03:00
Arun Kumar Singh
5292112420 hcitool: Add command to clear LE White List 2011-03-01 16:16:42 -03:00
Arun Kumar Singh
fc10b2c6f1 hcitool: Add command to read size of LE White List 2011-03-01 16:16:40 -03:00
Arun Kumar Singh
d68ff374da hcitool: Add command to remove a device from LE white list 2011-03-01 16:16:38 -03:00
Claudio Takahasi
7e018c6e02 hcitool: Change commands struct formating 2011-03-01 16:16:37 -03:00
Arun Kumar Singh
265059a149 hcitool: Add command to add a device to LE White List 2011-03-01 16:16:35 -03:00
Andre Guedes
47316f8c80 hcitool: fix interval and window parameters 
Set interval and window parameters properly if --discovery option
is present in lescan command.

According to the Bluetooth spec, during a general or limited discovery
procedure the scan interval and the scan window should be set to
11.25 ms. If --discovery option isn't present, both parameters are set
to the default value (10 ms) defined in LE Set Scan Parameters Command.

According to that command description, the interval and window parameters
should be set as follows:

	Time = N * 0.625 msec

So, in order to set the time values to 11.25 and 10 ms, the parameters
should be equal to 18 (0x0012) and 16 (0x0010), respectively.
 2011-02-24 17:40:22 -03:00
Andre Guedes
cf81589842 hcitool: add discovery procedure to lescan command 
This patch adds the option [--discovery=g|l] to lescan command. Use
this option to enable the general or limited discovery procedure.
If discovery option is not given scanning will display all results
ignoring the AD flags.
 2011-02-24 17:39:12 -03:00
Claudio Takahasi
9152acfbc7 Add hcitool command to change the parameters of a given LE connection 
Allows the LE master to start the Connection Parameter Update Procedure.
Parameters values consistency are not verified on purpose allowing
invalid values to test fail scenarios.
 2011-02-23 00:27:22 -03:00
Claudio Takahasi
8e7af67a19 Remove unneeded comma in the hcitool commands declaration 2011-02-23 00:27:15 -03:00
Andrei Emeltchenko
61b3ce7194 hcitool: Add bdaddr type option to lecc 2011-02-11 14:07:22 -08:00
Andrei Emeltchenko
2cc99a5ea6 Bluetooth: hcitool: add option for LE_Scan_Type parameter 
The LE_Scan_Type parameter controls the type of scan to perform.
 2011-02-11 13:41:28 -08:00
Gustavo F. Padovan
12eac6993b rename: tools/main.c to tools/rfcomm.c 2011-02-04 06:55:46 +02:00
Andre Dieb Martins
ea6c8a871f Fix hciconfig leadv returned response 
Fixes hciconfig leadv returned response by treating both status of the
command execution and HCI error code.
 2011-02-01 11:07:00 +02:00
Claudio Takahasi
a026163d2c Add option to enable privacy during scanning to hcitool 
When privacy is enabled, random address is used during active scanning.
The non-resolvable private address shall be set using hciconfig.
 2011-01-31 10:37:05 +02:00
Claudio Takahasi
150f7a26db Add option to set LE random address to hciconfig 2011-01-31 10:37:02 +02:00
Claudio Takahasi
f2861a8c79 Add LE read supported states for hciconfig 
Displays the states and state combinations that the link layer
supports. Usage: hciconfig hcix lestates
 2010-12-29 23:48:19 +02:00
Michal Labedzki
ed2c65ad9d Coding style fixes for lib and tools 2010-12-21 10:50:59 +02:00
Michal Labedzki
57aa201c25 Fix tools UI to avoid program launch mistakes. 
hciconfig: warrning user on unknown commands
hcitool: return error on unknown command in hcitool
fix length size in comparision to avoid ambiguity commands
check if command number of arguments is correct
 2010-12-20 17:39:06 +02:00
Suraj Sumangala
4e0e44626d hciattach: download configuration at user requested baud rate 
This patch support downloading configuration for Atheros AR300x HCI UART
chip at user requested baud rate instead of the initial baud rate.
 2010-11-23 12:09:20 +01:00
Suraj Sumangala
429877099f hciattach: make set_speed return error if any operation fails 
This patch lets set_speed function changing UART baud rate to return an
error code if any one operation fails instead of returning only the last
operation's status.
 2010-11-23 12:08:54 +01:00
Wade Brown
53095459ee Add a runtime option to set the BCSP communication rate 2010-11-23 10:01:58 +01:00
Johan Hedberg
29c494df12 Make LE_LINK define private to hcitool.c for now 
The value 0x03 isn't something that exists in the core spec, so it
shouldn't be used in the same API as SCO/ACL link types. Since there are
some experimental kernel patches that use it this patch makes it private
to hcitool.c.
 2010-11-21 20:01:20 +01:00
Suraj Sumangala
0e32ca24d1 hciattach: send hci commands after hci socket bring up 
This patch makes The Atheros AR300x specific initialization code
to send power management command over HCI socket after bringing up
the device.
 2010-11-19 17:24:17 +02:00
Sheldon Demario
bca4b3c88b Print LE link type on hcitool 2010-11-11 12:04:47 +02:00
Anderson Lizardo
566b05540b hciattach: Bring up device before sending commands over socket 
The Texas specific initialization code sends HCI commands over the
bluetooth socket, but does not bring up the device. This gives these
errors when running "hciattach /dev/ttyUSB0 texas":

Found a Texas Instruments' chip!
Firmware file : /lib/firmware/TIInit_XX.Y.ZZ.bts
Loaded BTS script version 1
Cannot send hci command to socket: Network is down
Can't initialize device: Network is down
 2010-11-11 11:25:00 +02:00
Suraj Sumangala
29fef5b02f Bluetooth: Add support to specify patch download location 
This patch add support for specifying patch download address for
AR300x patch download logic.
 2010-10-05 08:56:13 +02:00
Marcel Holtmann
3fc9a5d2f3 Also for LE only devices enable the event mask 2010-10-04 11:11:09 +02:00
Marcel Holtmann
5fd66bcbff Set event mask bit if LE is supported 2010-10-04 11:04:15 +02:00
Jaikumar Ganesh
9ee9e43527 Fix Headset Audio gateway SDP record. 
Headset Audio Gateway does not have the Supported Features
in the SDP records according to the HSP specification.
 2010-09-22 10:21:48 +03:00
Anderson Briglia
5ca342ccaa hciconfig: add LE_SET_ADVERTISE_ENABLE cmd 
This patch implements two new hciconfig commands: leadv and noleadv.
These new hciconfig flags are responsible to LE_SET_ADVERTISE_ENABLE
command implementation.
 2010-09-06 19:07:47 +03:00
Matthew Wilson
c6be8dcf9e Firmware download for Qualcomm Bluetooth devices 
Configures device address from hciattach parameter.
UART speed limited to 115200.
Requires separate device specific firmware.
 2010-08-23 23:39:01 +03:00
Suraj Sumangala
848b12d537 Add host level support for Atheros AR300x device 
This patch implements support for the Atheros AR300x Bluetooth chip in
hciattach. It supports configuration download and power management
configure feature.
 2010-08-18 13:23:20 +03:00
Suraj Sumangala
e54f6d67ac Bluetooth: Option to enable power management from host 
This provides a new option for hciattach to enable hardware specific
power management from host.
This option by default will be disabled for existing devices
 2010-08-17 17:29:58 +03:00
Claudio Takahasi
df3c8e1ebb Add GATT SDP record for sdptool 
Extend sdptool to allow to add GATT SDP record. Devices that support
GATT over BR/EDR shall publish GATT record. This implementation intend
to be a reference for GATT SDP record creation and it can be a helper
to GATT servers implemented outside BlueZ.
 2010-08-09 18:06:43 -04:00
Ville Tervo
e49d5d3738 Use default adapter for LE commands 
Choose default adapter if device was not specified on the command line.
 2010-07-16 13:51:57 -03:00
Vinicius Costa Gomes
65d1af240b Add ledc command to hcitool 
This command allows for low-level LE connections to be disconnected
by handle.
 2010-07-13 17:34:58 -03:00
Vinicius Costa Gomes
71716c2a00 Add handle and timeout parameters to hci_le_create_conn 
Now hci_le_create_conn is more consistent with hci_create_conn, both
have a handle out parameter and a timeout.
 2010-07-12 20:11:43 -03:00
Johan Hedberg
6e6252937e Add hciattach support for initializing a device into raw mode 
This patch adds a -r switch to hciattach that can be used to initialize
a device into raw mode. This is accomplished with the help of the new
HCIUARTSETFLAGS ioctl.
 2010-07-12 11:52:27 -03:00
Johan Hedberg
dd84462f51 Add missing hciattach command line switches to the manual page 
This patch adds some previously undocumented command line switches to
the hciattach manual page.
 2010-07-09 17:19:24 -03:00
Vinicius Costa Gomes
c8e88ab534 Add lecc command to hcitool 
This command allows the creation of LE Connections to remote devices.
The command is useful for testing if the local device is able to start
connections and if the remote device is able to receive connection
requests.
 2010-07-08 21:05:36 -03:00
Vinicius Costa Gomes
46d1c28faf Fix not respecting the user's endianism for LE Scan 
When setting LE Scan parameters we were assuming that the user was using
a Little Endian machine.
 2010-07-08 21:05:36 -03:00
Vinicius Costa Gomes
9438aa4682 Add lescan command to hcitool 
This is a sample implementation of the LE Scan procedure.
 2010-07-06 20:17:38 -03:00
Gustavo F. Padovan
9df2edb4ee Add "hciX" to hciconfig man page 2010-07-06 10:45:49 -03:00
Vladimir Davydov
c637b9ba67 hciattach: Fix the timeout handling code 
The variable 'retries' should be defined as static, or it will be always
0.
 2010-06-30 17:38:07 +03:00
Gustavo F. Padovan
e272c8c69b sdptool: Fix 2 possible NULL dereference 
Issues found by smatch static check:
http://smatch.sourceforge.net/
 2010-06-08 14:25:36 +08:00
Elvis Pfützenreuter
d48df6f540 Change MDP profile name and macros to HDP 2010-06-04 11:24:10 +03:00
Johan Hedberg
38a7ef119c Add hciconfig support for blacklisting 
This patch implements hciconfig support for the new HCIBLOCKADDR and
HCIUNBLOCKADDR ioctls.
 2010-05-17 17:30:35 +02:00
Jose Antonio Santos Cadenas
0edbc77755 Remove extra spaces from tools dir 2010-05-07 01:48:03 +03:00
Marcel Holtmann
fae1aebd13 Pretty print HCI revision and LMP subversion 2010-03-07 13:30:50 -08:00
Marcel Holtmann
5e5b0fdcd3 Show HCI and LMP versions on separate lines 2010-02-13 02:23:55 +01:00
Marcel Holtmann
3e0db2b27a Show controller type and bus type for every device 2010-02-13 02:22:18 +01:00
Marcel Holtmann
06e9ad1e95 The TX power level is a signed int and not an unsigned int 2010-02-05 20:16:38 -08:00
Marcel Holtmann
12b7f844c0 Print EIR attribute for Device ID 2010-02-05 20:16:03 -08:00
Marcel Holtmann
c886503a79 Fix another fallout from Inquiry Response Transmit Power Level typo 2010-02-05 19:52:59 -08:00
Nick Pelly
fc3764769f Add 0xff (any object type) to sdptool OPUSH supported formats list. 
This fixed an issue with sending an image from OSX. OSX would show a
warning that the bluez stack does not support this file type, but offer
to send it anyway (which works). This change to advertise support for
all object types will remove this warning.

The list of file types that can be advertised in the SDP record is very
limited anyway. It is best to list that we support all file types here,
and then filter at the OPP/OBEX connection instead.

For reference:
0x01 = vCard 2.1
0x02 = vCard 3.0
0x03 = vCal 1.0
0x04 = iCal 2.0
0x05 = vNote
0x06 = vMessage
0xFF = any type of object.
 2010-02-04 17:10:50 -08:00
Johan Hedberg
5592142cb9 Update Nokia copyrights 2010-01-07 01:11:05 -08:00
Marcel Holtmann
9184e2eeb7 Update copyright information 2010-01-01 17:08:17 -08:00
Johan Hedberg
1d7afe8211 Fix another variable initialization 2009-10-02 11:19:05 +02:00
Steve Grubb
2e926fb016 Fix memory leaks 
I was doing some code reviews of the 4.54 release and found a few memory
leaks. These are mostly in error paths.
 2009-10-02 11:18:16 +02:00
Marcel Holtmann
970e9e9a48 Move rfcomm utility into tools directory 2009-08-29 22:09:10 -07:00
Marcel Holtmann
a5b1e3d02c Switch to a full non-recursive build system 2009-08-23 00:40:59 -07:00
Marcel Holtmann
c7c8d2208d Remove unused variables left by previous patch 2009-08-06 14:10:01 -07:00
Zhu Lan
c500ffad7e Modify example PBAP SDP record of sdptool 
Fix to pass PTS case TC_SDAS_BV_03_I(since PTS3.2 update2).
The code tried to append the UINT type value to the supported
respositories.  However, the wrong function sdp_seq_alloc()
was used. This function adds 2 redundant bytes (SDP_SEQ8 as
0x35, seq) ahead of 0x08, so that latest PTS IOPT will fail.
According to spec, PBAP attributes should report 0x08 0x01
or 0x08 0x03 right after 0x0314. The correct function to use
is sdp_data_alloc(), with clean 0x08 0x01 appended as
SDP_ATTR_SUPPORTED_REPOSITORIES.
 2009-08-06 14:08:11 -07:00
Nick Pelly
57aec32d00 Add chipset id for brf6350. 2009-07-08 18:25:45 -07:00
Marcel Holtmann
4f6c27de96 Fix fallout from l2ping manual page rename 2009-07-05 09:44:29 -07:00
Filippo Giunchedi
1a1c60a8bc move tools/l2ping.1 to man section 8 
usually only root is able to invoke l2ping thus move to man section 8
 2009-07-03 17:42:05 +03:00
Filippo Giunchedi
f4804a8f52 remove trailing whitespaces in manpages 2009-06-30 16:27:55 +03:00
Ohad Ben-Cohen
59901631d2 Fix short commands limit 2009-06-27 10:24:21 +02:00
Marcel Holtmann
3610df67a6 Fix signed/unsigned comparison warning 2009-06-26 09:00:54 +02:00
Jiafa Liu
e5fb1b8e7c Add support for registration of a PBAP service using sdptool 2009-06-26 08:58:50 +02:00
Nick Pelly
fc29f95251 Add TI wl1271 to texas instruments chip list 2009-06-11 20:38:11 +02:00
Marcel Holtmann
b5fdd00fad Fix to complicated logic Dell switching routine 2009-05-18 11:19:11 -07:00
Mario Limonciello
4e90276635 Reinstitute usb_detach_kernel_driver_np, but in the proper place 
The kernel might still be grab the usb device, so release it before claim.
 2009-05-18 11:15:45 -07:00
Marcel Holtmann
d16c663f55 Fix uninitialized fallout from Mario's patches 2009-05-16 15:25:39 -07:00
Mario Limonciello
a09e97ef08 Fix dmesg errors about hid2hci not claiming interface before usage 
These errors were caused from trying to detach the kernel driver from
the interface, which was unnecessary. A simple usb_claim_interface is
all that is necessary. It is however, important to ensure the interface
claim is successful.
 2009-05-16 06:37:29 -07:00
Mario Limonciello
4c027b63d4 Add support for switching from HCI->HID mode for Dell BT adapters 
This allows Dell BT adapters to be able to be switched back to HID mode
if users desire to do so, such as on shutdown.
 2009-05-16 06:14:17 -07:00
Mario Limonciello
7b2ece36e0 Add support for command line arguments on hid2hci tool 
This means that the hid2hci tool will not have to run on every bootup
for every machine with BlueZ installed. It instead gets ran on demand
if a product that is called out from a udev rules file contains the
correct attributes and/or VID/PID.

It also makes it easier for users to manually test new VID/PID
combinations to determine if they should be supported by BlueZ.
 2009-05-16 06:12:47 -07:00
Marcel Holtmann
81352f7d2d Increase BCSP timeout for setup and transaction 2009-05-10 09:32:09 -07:00
Marcel Holtmann
72c6ed7e2d Use timeout value also for BCSP timeout 2009-05-09 22:05:54 -07:00
Marcel Holtmann
9b3cfb2d89 Add tool to calculate HCI event mask 2009-05-09 22:05:07 -07:00
Marcel Holtmann
3818459c88 Use ppoll() instead of poll() for keeping line discipline 2009-05-08 10:55:15 -07:00
Johan Hedberg
7c27b3e218 Make use of size_t and ssize_t when possible 2009-03-12 16:15:06 -03:00
Gustavo F. Padovan
28faab63be Fix memory leaks in hciconfig and hcitool 
Some printfs were using functions that return dynamic allocated memory
as parameters.
 2009-02-10 16:40:47 +01:00
Marcel Holtmann
8dcd4a1f5e Add delay to have 2.1 setup settle before requesting features again 2009-02-03 01:32:10 +01:00
Marcel Holtmann
40ebdad50f Use %zd instead of %ld for size_t 2009-01-30 12:37:34 +01:00
Marcel Holtmann
9c0b5859e6 Fix mostly every warning caused by -Wsign-compare 2009-01-29 17:58:28 +01:00
Nick Pelly
3eb1274d04 Update l2ping man page for recent changes to l2ping. 2009-01-21 11:44:15 +01:00
Marcel Holtmann
dfd000c761 Remove extra comment 2009-01-18 16:54:41 +01:00