This reverts commit 8a03376544.
The patch needs to be split up and the gdbus/ changes were bogus
compared to the original commit message.
Conflicts:
Makefile.am
Makefile.obexd
profiles/cyclingspeed/cyclingspeed.c
profiles/heartrate/heartrate.c
src/error.c
Instead of trying to include config.h in each file over the tree and
possibly forgetting to include it, give a "-include config.h" argument
to the compiler so it's guaranteed that a) it will be included for all
source files and b) it will be the first header included.
gdbus/ directory is left out, since it would break other projects using
it.
Instead of defining _GNU_SOURCE in each source file (and potentially
forgetting in some), tell the build system we use extensions and let it
define _GNU_SOURCE in config.h.
This patch enables the Intel Bluetooth device (UART sku) over the H4
protocol. It is responsible for bring up the device into known state by
configuring the baudrate and applying the patches, if required.
override speed setting if firmware script issues serial settings command,
otherwise the value given in the firmware script will be overridden.
Example:
hciattach /dev/ttyO1 texas 115200
will fail, because /dev/ttyO1 will be opened with 115200 b/s, then
the firmware script will set the buadrate to 3000000 b/s, after UART init
hciattach.c will set the baudrate to 115200, so communication is broken.
The only correct way is to set both speeds:
hciattach -s 115200 /dev/ttyO1 texas 3000000
With this patch only initial speed must be specified. The former semantic
will be preserved in case the firmware script doesn't provide serial
settings action.
Tested with wl1271 and firmware TIInit_7.2.31.bts
This patch lets set_speed function changing UART baud rate to return an
error code if any one operation fails instead of returning only the last
operation's status.
This patch implements support for the Atheros AR300x Bluetooth chip in
hciattach. It supports configuration download and power management
configure feature.
This provides a new option for hciattach to enable hardware specific
power management from host.
This option by default will be disabled for existing devices
This patch adds a -r switch to hciattach that can be used to initialize
a device into raw mode. This is accomplished with the help of the new
HCIUARTSETFLAGS ioctl.
